关于厚薄板弯曲分析的内位移杂交元法

 本文通过引入单元内位移和优化处理的单元应力场,以计入剪切变形的板弯曲能量泛函为基础,导出适用于厚、薄板分析的四边形杂交应力元。内力场和内位移的合理选择避免了单元零能模式的出现、避免了解的剪切自锁现象。该优化单元显示了较好的通用性和收敛性。对关于剪切自锁的RCI判据提出了反例、说明了它的局限性。     

科学计算中的高性能有限元算法

 圆周率的计算是科学计算的启示,它提供了许多信息,包括计算误差的正负、大小,以及算法的加速。在偏微分方程的计算中,有无相似的内容,这就是本文试要回答的问题。     

太阳同步卫星轨道参数的容许偏差分析

飞行任务对卫星轨道提出指标要求，这些指标决定了卫星轨道参数的容许偏差范围。结合太阳同步(准)回归轨道卫星的轨道特性，针对覆盖重叠率、太阳同步等指标，使用解析方法讨论了大气阻力摄动影响下轨道参数的容许偏差，通过分析可以初步确定轨道控制策略及能量需求，最终为轨道保持方法的设计提供参考和依据。     

小卫星编队飞行的相对运动学方程研究

以运动学方法为基础研究了编队卫星相对运动的一种更直接方法，利用不同天体力学特性，将相对位置和速度与相对轨道参数建立了联系，首先，详细推导了以运动学方法为基础的相对运动方程，据此可直接得出环绕卫星的轨道根数，其次，为有利于相对轨道分析和设计，对相对运动方程进行了简化，最后，通过例子验证了该方法的正确性，仿真结果表明该方法是有效可行的。     

火箭型单级入轨（SSTO）的初步分析

火箭型单级入轨（ＳＳＴＯ）是今后的发展方向之一，从多方面分析了火箭型单级入轨（ＳＳＴＯ）方案的可能性，简要回顾了ＳＳＴＯ的发展历史，特别对三角快帆（ＤＣ－Ｃｌｉｐｐｅｒ）作了分析，认为采取多项先进技术后是完全可以实现的。明确了单级入轨的两个基本方向：提高比冲和降低结构重量。分析了采用不同形式发动机的影响，列出了主要关键技术，最后提出了几个有参考价值的观点。     

Precise line-of-sight modelling for angles-only relative navigation

This work presents a precise analytical model to reconstruct the line-of-sight vector to a target satellite over time, as required by angles-only relative navigation systems for application to rendezvous missions. The model includes the effects of the geopotential, featuring: the analytical propagation in the mean relative orbital elements (up to second-order expansion), the analytical two-way osculating/mean orbital elements’ conversion (second-order in $J_2$ and up to a given degree and order of the geopotential), and a second-order mapping from the perturbed osculating elements’ set to the local orbital frame. Performances are assessed against the line-of-sight reconstructed out of the precise GPS-based positioning products of the PRISMA mission. The line-of-sight modelled over a far-range one day long scenario can be fitted against the true one presenting residuals of the order of ten arc-seconds, which is below the typical sensor noise at far-range.     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

基于卫星和星敏感器的冗余激光惯组在轨标定

采用高精度卫星导航速度、位置信息以及星敏感器提供的姿态信息设计十表冗余捷联惯组的标定模型,包含陀螺和加速度计的零次项和标度因数,对卫星和星敏感器辅助的冗余激光陀螺捷联惯组进行实时在轨标定.利用标准Kalman滤波和Sage-Husa自适应滤波作为估计算法,对十表冗余捷联惯组参数进行在线估计.数值仿真结果表明:参数标定精度均在7％以内,是一种实时的在轨标定方法,满足误差补偿要求.冗余惯组在轨标定方法为航天器高精度定姿和定轨提供了一种理论参考.