一种多步的基于切换星间测量的多星自主导航算法

针对基于星间测量的多星自主导航问题,从载荷优化和节约成本考虑,提出了一种单套敏感器切换测量的导航方案。建立了该导航方案下的系统状态空间模型,并基于扩展卡尔曼滤波方程给出了导航估计算法。基于多步卡尔曼滤波方法,将集中的滤波算法解耦为多个平行的子滤波器,使计算量降低到原算法的50%以下,并且在切换测量的导航方案下,部分解耦出的子滤波器可以只预测不更新,能够进一步地降低计算负担。给出了多步滤波算法的推导过程,证明了其与标准卡尔曼滤波的数学等价性,故算法的估计性能及计算结果与标准卡尔曼滤波一致,但计算速度有明显提升。最后,通过具体算例给出了算法的仿真验证。     

电信电缆交接箱管理网MNTCSB的实现

电信电缆交接箱管理网MNTCSB利用先进的计算机网络和通信技术实现了对交接箱的自动化管理.叙述了MNTCSB系统的硬件构成、各部分通信方式的解决、地址编码和地址解析、关键算法、各网管功能的实现等.      

Finite-time composite guidance law with input constraint and dynamics compensation

Guidance laws are proposed for a near space interceptor with on–off type thrust as output. The target-interceptor engagement kinematics is integrated with the first-order dynamics of thruster to design guidance laws. The bang-bang type guidance law with linear sliding mode is proposed to deal with thruster dynamics, and the sufficient condition for finite time convergence is rigorously proved based on the finite-time convergence theory. According to the sufficient condition, a sliding mode guidance law with hysteresis-band switching is introduced to reduce the switching frequency of thruster. Then two guidance laws are combined into a composite guidance law to improve the guidance performance. Simulation results show that the line-of-sight angular rate can converge to a neighborhood of the equilibrium point before the final time of the guidance process, and the composite guidance law has better performance than typical guidance laws.     

基于IP骨干网络的流量工程

讨论了在多个IDC（数据中心）所组成的骨干网络上实施流量工程的关键问题，首先分析了传统SPF算法的缺陷，给出了流量工程的基本概念，阐述了MPLS，REVP，IS－IS协议以及相互关系，然后给出了在MPLS网络实施流量工程的几个问题和解决方法，最后给出了在IP骨干网络上实施流量工程的成功案例。     

ZVS PWM全桥三电平直流变换器

提出了一种新型的ZVS PWM全桥三电平直流变换器。该变换器使用了以能量传输最大、滤波电感电流纹波最小、开关管实现ZVS等为条件寻找到的最佳开关方式，克服了传统ZVS全桥直流变换器中开关管电压应力高、滤波电感电流纹波大等缺点，所以其变换效率更高，响应速度更快，进一步拓宽了它的应用范围。本文分析了变换器的工作原理，给出了一个周期内的所有开关模态。本文还论述了谐振电感的设计和占空比的丢失，最后通过一个3kW,50kHz的实验样机加以验证分析结果。     

Multiple model predictive control of perching maneuver based on guardian maps

Considering the strong nonlinearity of Unmanned Aerial Vehicles(UAVs) resulting from high Angle of Attack(AOA) and fast maneuvering, we present a multi-model predictive control strategy for UAV maneuvering, which has a small amount of online calculation. Firstly, we divide the maneuver envelope of UAV into several sub-regions on the basis of the gap metric theory. A novel algorithm is then developed to determine the ploytopic model for each sub-region.According to this, a Robust Model Predictive...     

《高频电子线路》课程“相乘器”教学策略

相乘器是高频电子线路课程中的一个重要单元电路。掌握相乘器的组成、基本原理、分析方法以及器件特点是通信电子信息类学生学好调制、检波以及混频电路的关键所在,讨论非线性器件二极管在开关状态下组成"相乘器"的教学策略对教学活动具有重要意义。     

Design for aircraft engine multi-objective controllers with switching characteristics

The aircraft engine multi-loop control system is described and the switching control theory is introduced to solve the regulating and protecting control problems in this paper. The aircraft engine multi-loop control system is firstly described and the control problems are formulated. Secondly, the theory of the smooth switching control is devoted and a new extended scheme for the smooth switching of a switched control system is introduced. Then, for the key technologies of aero-engines switching control, a design algorithm is presented which can determine which candidate controller should be put in feedback with the plant to achieve a desired performance and the procedure to design the aircraft engine multi-loop control system is detailed. The switching performance objectives and the switching scheme are given and a family of PID controllers and compensators is designed. The simulation shows that using the switching control design method can not only improve the dynamic performance of the aircraft engine control system and reduce the switching times, but also guarantee the stability in some peculiar occasions.     

频率捷变时间精密测试系统

较详细地介绍了捷变时间的定义以及６种常用测量方法的原理、数据处理过程、及测量结果等内容。６种方法分别为检相－示波器法、鉴频－示波器法、检相－时间间隔计数器法、鉴频一时间间隔计数器法，ＨＰ５３７２Ａ测频和ＨＰ５３７２Ａ测相。给出了这几种测量方法的适用范围和优缺点。     

异质网上互操作—从数据交换到程序交换

对分布式计算和软件集成中的互操作性问题进行了讨论，叙述了遵循特定的标准解决互操作性的办法，比较几种常见的互操作标准，包括ＳＴＥＰ／ＳＤＡＩ，ＣＯＲＢＡ和Ｊａｖａ，描述了Ｊａｖａ语言出现后程序交换的新特点，并对互操作标准的现状作了评述。