梳状电容式微加速度计温度性能优化

零偏温度漂移是影响高精度MEMS加速度计整体性能的关键指标，敏感结构机械零位的温度漂移和电路零位(电容检测电路）的温度漂移是加速度计零偏温度漂移的直接原因。分析了影响加速度计零偏温度系数的3种主要影响因素，提出了某型加速度计伺服电路温度性能测试筛选方法，有效减小了电路零位的温度漂移。采用了全硅表头，同时对表头封装粘接方式进行优化，大幅减小了表头机械零位的温度漂移。经过这些优化措施后，加速度计的温度性能得到了明显改善，零偏温度系数由1.3mg/℃减小到0.5mg/℃，零偏的常温稳定性(1h）达到0.108mg，重复性(6次）达到0.141mg。     

Physical model for acoustic resonance in annular cavity structure

A physical model for acoustic resonance in the annular cavity structure is developed to represent the typical characteristic when acoustic resonance occurs. Firstly, the measurement of sound pressure in the casing and rotor blades vibration is operated in a multistage high pressure compressor. The sharp peak frequency and discrete multi-tone occur in the frequency spectrum of sound pressure in the compressor, and the vibration of the first stage of rotor blades synchronously presents the high amplitude. The frequencies associated with rotor blades vibration can be calculated with rotating sound source theory. It is also confirmed that acoustic resonance occurs in the multistage compressor. With acoustic similarity principle, an annular cavity model is established to simulate the typical characteristics of acoustic resonance in the compressor based on Large Eddy Simulation (LES) and Lighthill acoustic analogy. The coupling relationship between cavity acoustic mode and disc vibration mode shape is expounded when acoustic resonance occurs in the model. And acoustic resonance will be locked in the certain flow rate range. All these characteristics match well with those occur in the multistage high pressure compressor.     

Possible evidence for small-scale wave seeding of equatorial plasma bubbles

The small-scale wave-like structure (SSWS) of F region bottomside plasma density was proposed to be an important seeding for equatorial plasma bubble (EPB) generation, and employed in theoretical simulations of EPBs in recent years. The seeding role of SSWS, however, is waiting to be demonstrated by observation. Here we present two cases of SSWS and EPB observed by the Fuke all-sky airglow imager (19.3°N, 109.1°E; dip latitude 14.3°N). For each case, the results show that two large-scale wave-like structures (LSWSs) initially appeared around sunset in the longitude regions separated by 3–4°, but EPB irregularities were only generated in one of the LSWSs where SSWSs were seen riding on LSWS. For the other LSWS, no SSWS and EPB irregularities were seen. Considering that the two LSWSs were situated closely in longitude where the amplitude of pre-reversal enhancement of background eastward electric field should be similar, the observation that EPB was only generated in the longitude with simultaneous LSWS and SSWS could provide supporting evidence for SSWS seeding of EPB.     

K8飞机襟翼装配工艺的改进

Ｋ８飞机襟翼装配长期达不到设计要求，成为技术关键。本文从多方面分析了产生问题的原因，并详细介绍了改进方法及其效果。     

三角形截面高柔结构横风向振动的风洞试验研究

本文介绍了正三角形截面高柔结构模型在均匀流场和湍流场中三种迎角下的横风向风振响应风洞试验结果，分析了三角形截面高柔结构的横风向涡激振动现象与驰振危险性，获得了一些数据和结论。     

具有周期性薄膜热源的多层介质非稳态传热数值仿真

为分析具有薄膜热源的多层介质非稳态传热问题,以某型飞机层合电加温风挡为例,构建了一种热流密度-温度边界条件,实现了薄膜热源热流和温度属性向多层介质内外两个方向上的实时传递,再现了薄膜热源温度对临近多层介质表面温度的影响,为具有薄膜热源的多层介质传热问题分析和加温控制规律设计提供了一种可行方法.     

提高UV-LIGA制备金微细零件的尺寸精度研究(英文)

在众多影响UV-LIGA(Ultra-violet lithography Galvanik abformung)技术制备微细金属零件尺寸精度的因素中,SU-8胶溶胀性是最主要的。通常采用隔离带方法降低SU-8胶的溶胀性,以提高电铸微细零件的尺寸精度。由于贵重金属会沉积到隔离带内,造成了贵重金属的浪费,增加制造成本,因此该方法不适合贵重金属微细零件制造。针对隔离带方法的弊端,提出了半隔离带方法,在保证电铸微细金属零件尺寸精度的前提下,避免了贵重金属的浪费。另外,还采用电解液喷射方法实现了高电流密度电铸,缩短了电铸时间,进一步提高了电铸微细金属零件的尺寸精度。试验结果表明:采用半隔离带方法和高电流密度,可以有效提高金微细零件的尺寸精度,当电流密度提高到0.6A/dm2,金微细零件的尺寸精度可以达到5μm。     

空间可展桁架结构等效动力学模型研究进展与展望

随着航天重大工程的逐步实施，桁架式空间可展结构正朝着大型化、轻量化和多功能等方向发展，该类桁架结构具有周期性、大柔度、构型复杂等特点。为满足大型空间结构的高精度、高可靠性要求，其动力学建模、非线性振动与振动控制等问题越来越复杂且难于处理。因此，大型空间可展结构的等效连续体建模成为研究热点。本文着重介绍大型空间可展桁架结构等效动力学建模的研究现状，综述了等效动力学建模的研究对象、方法及已取得的成果，提炼出等效动力学建模和与之相应的非线性振动与振动控制研究领域中亟待深入研究的关键科学问题。     

第21,22周峰年太阳射电爆发中毫秒级精细结构的分析

本文对第21周的2840MHz及22周峰年的2545MHz，2645MHz和2840MHz波段上所观测到的285个快速事件进行分析，发现两个峰年的快速事件具有多种多样的快速活动（快速精细结构）．它们与耀斑的对应关系也做了统计分析．     

基于构型管理的飞机技术出版物数据结构研究

在飞机复杂产品的整体结构基础上,依据S1000D规范,采用模块化技术,建立技术出版物的三层数据结构,保证数据的重用性和一致性,便于技术出版物的构型控制管理。