编制摸拟器设计和性能数据要求的初步考虑

在研制飞行模拟器时，飞行模拟器的设计和性能数据是必需的。这些数据不仅是形成满足飞行模拟器各种规范和标准要求的基础，而且也是构成模拟器逼真度要求的基础。根据国际航空运输协会的要求，初步讨论了编制飞行模拟器设计和性能数据要求所考虑的因素。     

Solar sailing in realistic mode,based on a locally-optimal control laws

Ballistic design of solar sailing missions in the solar system is composed of defining the design parameters, the control programs, and the trajectories that provide performance goals of a flight. The use of a solar sail spacecraft imposes specific restrictions on mission parameters that include the degradation limit on the flight duration, the maximum temperature of solar sail's surface, the minimum distance from the Sun, the maximum angular velocity of the spacecraft's rotation and others.Many authors considered the impact of these restrictions on the design of the mission separately, but they used a sophisticated method of finding the exact optimal motion control or applied the most straightforward laws of motion control. This paper uses local-optimal control laws at the complete mathematical models of motion and functioning of solar sail spacecraft to describe a technique of designing interplanetary missions. The described method avoids the need to obtain an accurate optimal solution to the control problem and does not cause significant computational difficulties.     

一种用于航天器飞控演练的数管模拟器设计

飞控模拟器用于航天器飞控任务的演练,对确保飞控任务安全可靠起着关键作用.数管模拟器是飞控模拟器最重要的组成部分之一,用于模拟航天器的遥测、遥控、信息处理和传输等功能.文章介绍了一种航天器数管模拟器设计方案,它由通用工控机、通用和专用板卡、数管仿真软件几部分组成,具有真实性高、通用性高、灵活性高的特点,已在嫦娥一号和嫦娥...     

合成电阻在发动机控制半物理仿真接口模拟器中的应用

将电子合成电阻技术应用于半物理仿真接口模拟器中,以模拟热电阻传感器。在提高电阻合成精度、扩展桥压范围、提高极性适应能力、多通道之间的隔离以及非线性特性拟合等方面提出了有效的解决办法。经过实验标定,证明该合成电阻具有0.02Ω的稳态精度,并且在程序的控制下具有良好的动态电阻模拟能力,可以满足航空发动机控制半物理仿真试验的需要。      

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

Relevant experience learning: A deep reinforcement learning method for UAV autonomous motion planning in complex unknown environments

Unmanned Aerial Vehicles (UAVs) play a vital role in military warfare. In a variety of battlefield mission scenarios, UAVs are required to safely fly to designated locations without human intervention. Therefore, finding a suitable method to solve the UAV Autonomous Motion Planning (AMP) problem can improve the success rate of UAV missions to a certain extent. In recent years, many studies have used Deep Reinforcement Learning (DRL) methods to address the AMP problem and have achieved good results. From the perspective of sampling, this paper designs a sampling method with double-screening, combines it with the Deep Deterministic Policy Gradient (DDPG) algorithm, and proposes the Relevant Experience Learning-DDPG (REL-DDPG) algorithm. The REL-DDPG algorithm uses a Prioritized Experience Replay (PER) mechanism to break the correlation of continuous experiences in the experience pool, finds the experiences most similar to the current state to learn according to the theory in human education, and expands the influence of the learning process on action selection at the current state. All experiments are applied in a complex unknown simulation environment constructed based on the parameters of a real UAV. The training experiments show that REL-DDPG improves the convergence speed and the convergence result compared to the state-of-the-art DDPG algorithm, while the testing experiments show the applicability of the algorithm and investigate the performance under different parameter conditions.     

高精度高动态星模拟器研究

给出了高精度高动态星模拟器系统组成和总体结构, 提出一种基于亚像素显示技术提高动态星模拟器星点位置显示精度从而减小星点几何中心与能量中心位置偏差的新方法. 针对动态星模拟器高动态性要求, 提出一种快速精确检索全天球导航星的新方法, 将已知SAO (Smithsonian Astrophysical Observatory) 星表进行分区, 计算当前姿态四元数并分析航天器视轴所在区域, 对于距离视轴较远区域停止搜索和匹配, 很大程度上缩小了导航星搜索范围, 进而缩短了全天球恒星遍历所需时间. 软件测试结果表明, 此快速检索法可使全天球导航星的选取速度提高近10倍.      

柔性机械臂辅助空间站舱段对接阻抗控制

空间机械臂辅助舱段对接过程中存在测量与控制误差,易导致对接机构间存在较大接触力,传统FMA (Force MomentAccommodation)控制方法在测量接触力时无法消除大负载惯性力对测量的影响,且测量仪器的引入会进一步降低空间柔性机械臂的刚度。为此,文章提出了柔性机械臂辅助大负载空间舱段对接的阻抗控制方法,采用拉格朗日法推导了空间机械臂的关节输入力矩方程作为前馈输入,建立了含动力学前馈的空间机械臂阻抗控制程序,并以在商业软件ADAMS中建立的空间柔性机械臂与对接舱段组成的系统动力学模型作为控制对象,对系统进行ADAMS灢Matlab联合仿真。仿真结果表明,按照此控制方法,系统可克服外力干扰使目标解析点按照期望的方式运动;同时,通过测量机械臂关节运动参数即可实现对外力的准确感知,而不需额外添加力传感器,既消除了大负载惯性力对测量的影响,也不会导致柔性机械臂刚度的降低。     

运动基航天飞行训练模拟器信号缩比算法研究

当前运动基飞行模拟器对控制信号的缩比以三阶多项式缩比法为主,但其参数确定困难且当缩比幅度较大时易使信号出现较大畸变。而航天飞行模拟中常常会经历线加速度或角速度信号在较大幅值范围内的增大或减小,典型的如返回再入时的过载变化。针对此种情况,一种新的缩比算法——Hermite缩比函数法被提出。首先完善了Hermit缩比法关于最优参数理论的推导和证明;其次,引入变量“缩比度”,在实例仿真中比较了其对两种缩比方法的影响。结果表明,Hermite缩比函数法参数确定方便,其信号单调性的保持不依赖于缩比度的取值,更适合应用于缩比度变化较大的航天飞行模拟中。
     

电子飞控飞机的飞行品质适航验证

FAA AC25-7A中的飞行品质评定方法 (HQRM)能够对使用电子飞控系统的民用运输机进行飞行品质评估。分析了HQRM评估程序以及相关适航要求,根据某民用飞机飞控系统功能危险分析,针对单侧升降舵卡阻这一典型故障,提出了在该失效状态下的模拟器飞行品质评估试验程序,分别给出了HQRM和相应军用标准评估方法,对军民评估方法的差异性和一致性进行了分析。研究结果对采用电子飞控系统的现代飞机的飞行品质适航验证具有工程参考意义。