Separation process of multi-spheres in hypersonic flow

The separation process of multi-spheres in hypersonic flow has been experimentally investigated. The experiments were conducted in a shock tunnel at a nominal freestream Mach number of 6. Iron or acetal small light spheres with different sizes, varying from 2.38 to 6 mm, were considered. They were mounted by a thin wire. The trajectory of the spheres was analyzed using optical images. By varying the radius and the number of spheres from a single to multiple spheres, the lateral velocity and the separation behavior including the phenomenon known as ‘shock wave surfing’ were measured and analyzed. A new equation to account for the lateral velocity of the multi-spheres was proposed by extending the well-known Passey and Melosh’s theory based on two bodies. The theoretical results were compared with the presented experimental data and a good agreement was found. Using the derived equation, the re-entry trajectory analysis of multi-spheres, that is regarded as the hypothetical break-up, was performed. The ground footprint and downrange due to the separation of the multi-spheres were compared with that of single- and two-spheres. The results showed that as the number of spheres increased, the lateral velocity increased while the ballistic coefficient decreased. This led to a large discrepancy in the ground footprint as well as the downrange when compared to the single sphere. Caution should therefore be exercised in the trajectory analysis when the effect of separation induced due to fragmentation is not considered.     

相控阵雷达长时跟踪波束调度与波形优化策略

针对相控阵雷达多目标跟踪波束调度和波形参数优化控制的问题，本文提出了一种基于马尔可夫决策过程（MDP）的相控阵雷达跟踪波束调度与波形参数优化策略，该方法以无迹卡尔曼滤波（UKF）算法为基础来估计目标的状态。首先将本文的序列决策问题建模为马尔可夫决策过程，定义了资源的效费比和长期回报率，然后与当前实际跟踪误差综合考虑作为MDP的回报函数，进而给出了调度的优化模型，最后将长时决策问题转化为动态规划算法结构进行求解，并且提出了一种并行混合遗传粒子群优化算法来求解各决策时刻的最优策略。仿真结果表明了长时策略的先进性以及寻优算法的优越性，与传统的短时策略相比，跟踪精度可提高11.17%。     

基于位姿测量不确定度的飞机对接质量评估

针对基于位姿的数字化测量辅助飞机大部件对接技术的发展与应用,对位姿测量不确定度以及基于不确定度的质量评价方法进行了研究.给出了数字化对接环境下大部件位姿的数学表达形式及意义.提出了基于协方差矩阵的位姿测量不确定度解析算法,并通过仿真算例与蒙特卡洛仿真法进行了对比,验证了该算法的有效性.给出了飞机大部件对接过程数字化测量工艺能力指数的概念,用于对测量结果的可信性进行评价;通过构建位姿测量不确定度与对接质量评估指标间的映射关系,提出了一种基于位姿测量不确定度的大部件对接质量评估方法,并以机翼-机身对接过程为案例,对方法的可行性、算法的有效性进行了验证.     

基于GPR模型的自适应平方根容积卡尔曼滤波算法

与传统算法一样,动态系统的参数化模型(含噪声统计特性)未知或不够准确易导致容积卡尔曼滤波(CKF)效果严重下降,甚至滤波结果发散.为此,利用高斯过程回归(GPR)方法对训练数据进行学习,得到动态系统的状态转移GPR模型和量测GPR模型以及噪声统计特性,用以替代或增强原有动态系统模型,并将其融入到平方根容积卡尔曼滤波(SRCKF)中,分别提出了无模型高斯过程SRCKF (MFGP-SRCKF)和模型增强高斯过程SRCKF (MEGP-SRCKF)两种算法.仿真结果表明:这两种新的自适应滤波算法提高了动态系统模型精度,且实时自适应调整噪声的协方差,克服了传统算法滤波性能易受系统模型限制的问题;与MFGP-SRCKF相比,在给定一个不够准确的参数化模型,且有限的训练数据未能遍布估计状态空间的情况下,MEGP-SRCKF具备更高的滤波精度.     

Fast approximate maximum likelihood period estimation from incomplete timing data

 To estimate the period of a periodic point process from noisy and incomplete observations, the classical periodogram algorithm is modified. The original periodogram algorithm yields an estimate by performing grid search of the peak of a spectrum, which is equivalent to the periodogram of the periodic point process, thus its performance is found to be sensitive to the chosen grid spacing. This paper derives a novel grid spacing formula, after finding a lower bound of the width of the spectral mainlobe. By employing this formula, the proposed new estimator can determine an appropriate grid spacing adaptively, and is able to yield approximate maximum likelihood estimate (MLE) with a computational complexity of O(n²). Experimental results prove that the proposed estimator can achieve better trade-off between statistical accuracy and complexity, as compared to existing methods. Simulations also show that the derived grid spacing formula is also applicable to other estimators that operate similarly by grid search.     

V-22“鱼鹰”倾转旋翼机研制历程与关键技术

倾转旋翼机具有速度快、噪声小、航程远、载重大和耗油率低等优点,本文介绍了贝尔直升机公司V-22"鱼鹰"倾转旋翼机从原理验证阶段的XV-3机到方案验证阶段的XV-15机,再到实用工程研制阶段的V-22"鱼鹰"机循序渐进的研制历程,并叙述了倾转旋翼机研制中的几项关键技术。     

铝合金矩形机箱工装设计及拼焊工艺

大厚度铝合金矩形机箱在拼焊生产过程中,存在组装难度大,焊缝质量不易保证,焊后变形大等问题.针对铝合金矩形机箱焊后马鞍型和螺旋型变形特点,选用表面定位方式,设计了多种类型的夹板,完成了箱体焊接工装的设计.在此基础上,采用真空电子束焊,通过严格的工艺措施完成了机箱的拼焊,获得了深宽比符合要求的焊缝,保证了机箱结构的完整性.经检测,矩形机箱满足设计要求.实践证明,此工装和工艺方案可行,对类似构件的制造有指导意义.     

超声速斜爆震发动机起爆过程研究综述

对超声速斜爆震发动机的起爆方式进行了比较分析,对起爆发展和稳定特性的研究历程和发展现状进行了综述,对相关的研究方法和技术进行了概括,提出了利用先进光学测量技术,结合激光诱导荧光技术对超声速斜爆震发动机起爆过程进行实验研究的设想。     

JNJ-A型胶凝剂合成碱化工艺研究

为优化JNJ-A型胶凝剂的制备工艺,保证胶体推进剂的产品质量,采用正交试验研究了JNJ-A型胶凝剂合成碱化工艺参数对产品性能的影响.依据粘度、透光度等性能指标筛选出较佳胶凝剂制备碱化工艺条件为：碱液浓度22％,碱液用量35wt原料％,稀释剂用量为原料质量的26倍,碱化温度1℃,碱化时间70 min,得到了粘度值32 000 mPa·s,透光度74％的合格JNJ-A型胶凝剂产品,确定了各个碱化工艺参数对胶凝剂性能影响的先后顺序为：碱化时间＞碱液浓度＞碱液用量＞稀释剂用量＞碱化温度.     

碱性无氰镀锌工艺研究

介绍了用氢氧化钠代替氰化钠进行无氰镀锌的工艺方法、工艺过程和工艺规范,研究了添加剂浓度、氧化锌浓度、NaOH/ZnO比率和电流密度对锌镀层的沉积速率、外观、抗腐蚀性、氢脆性的影响,得到了无氰镀锌电镀液最佳配方和无氰镀锌的工艺规范。采用该规范电镀的产品通过了200 h的氢脆拉伸试验。