Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Severe tool wear and poor surface quality are the main problems during micro machining of cemented carbide. In this work, an innovative hybrid process of laser-induced oxidation assisted micro milling (LOMM) was proposed to solve the problems. A nanosecond laser was utilized to induce oxidation of the WC-20%Co material, producing loose oxide which was easy to remove. The micro machinability of the material was improved by laser-induced oxidation. The oxidation mechanisms of cemented carbide were studied. A microgroove with a depth of 2.5 mm and aspect ratio of 5 was fabricated successfully. The milling force, surface quality and tool wear mechanisms were investigated. For comparison, a microgroove was also fabricated with conventional micro milling (COMM) using identical milling parameters. Results revealed that in LOMM the milling force and tool wear rate were extremely low during removing the oxide. The machined surface quality and dimensional accuracy achieved by LOMM were superior to those obtained by COMM. The surface roughness S_a of the microgroove bottom reached 88 nm in LOMM, while the cross-sectional geometry of the microgroove was a trapezoid. Perpendicularity of the microgroove sidewall machined by LOMM was better than that by COMM. The tool wear forms in LOMM were coating spalling and slight tool nose breakage. Compared with COMM, the tool life in LOMM was prolonged significantly. It indicates that the proposed hybrid process is an effective and efficient way to fabricate high aspect ratio micro-features with high dimensional accuracy.     

数字化组合式大力值校准系统的研制

为了满足对大力值(20 MN左右)的测量和校准,开发了一套数字化组合式大力值校准装置。其最大量程可达24 MN,系统测量准确度为0.1%,适合于大型材料试验机的校准和检定。本文详细介绍了装置的组成结构、弹性体设计、贴片和组桥方式、数字化的方法以及与计算机的通信实现。     

机床组合夹具设计仿真平台在《机械制造技术基础》课程教学中的应用

本文针对传统的机械制造技术基础教学环节中存在的一些问题,提出了用VB（Visual Basic）对Solid-Works开发的机床组合夹具仿真平台进行辅助教学,并介绍了该仿真平台的设计和实现过程及使用和教学效果。     

组合机床多轴箱计算机辅助设计系统

介绍利用ＡｏｔｏＣＡＤ二次开发工具ＯｂｊｅｃｔＡＲＸ３．０开发的组合机床多轴箱ＣＡＤ。阐述依据模块化原理设计系统的各个组成模块，以及由于采用ＶｉｓｕａｌＣ＋＋６．０可视化编程语言及微软ＭＦＣ基本类库，使程序界面的交互性比以往设计显著提高。     

中国核电厂操作员反应时认知模型的应用(英文)

讨论了一些有关人员行为与时间有依赖关系的可靠性模型；给出了中国核电厂操作员在清华大学培训模型机上的一些可靠性实验结果。此外，还根据已获得的实验数据计算了在ＡＴＷＳ事故条件下人的失误概率。     

飞机纵向驾驶员诱发振荡灵敏度分析

采用系统灵敏度理论，以修正的带宽准则，增益和相位裕度准则以及Ｎｅａｌ－ｓｍｉｔｈ准则等飞机纵向驾驶员诱发振荡（ＰＩＯ）预测准则作为系统指标，建立了参数变化对诱发振荡预测指标影响的灵敏度公式，以ＪＪ７飞机为例，给出了飞机，操纵系统及驾驶员参数上述指标影响的灵敏度，根据计算结果进行了ＰＩＯ参数敏度预测分析，同时与数值仿真结果进行了对比分析。     

微纳米尺度流动实验研究的问题与进展

微纳米实验流体力学研究的流动特征尺度在1mm～1nm范围,处于宏观流动到分子运动的过渡区。连续介质力学与量子力学这两个经典理论的衔接,提出了诸如连续性假设适用性、边界滑移等基本理论问题。同时从微纳米尺度研究界面处液/固/气的耦合,化学、电学性质对流动的影响值得关注。微纳米实验测量仪器融入了力、电等测量手段,要求测量空间精度达到nm量级,力的测量精度达到pN,时间分辨率达到ns。本文围绕连续性假设适用性、边界滑移、微纳米粒子布朗运动及微尺度涡旋测量等问题,介绍了 Micro/Nano PIV、示踪粒子流场显示等技术应用于微纳流场观测的进展与难点。目前微纳米流动测量仍然沿着经典流体力学测量“小型化”的思路开展,而纳尺度的测量期待着新的实验方法与技术的提出。     

基于GA-ELM的飞行载荷参数识别

针对用复杂飞行数据识别飞行载荷时的精度低、速度慢等问题,提出一种结合遗传算法(GA)和极限学习机(ELM)的GA-ELM模型。该模型使用ELM神经网络作为计算核心,用遗传算法产生ELM网络输入层到隐含层的权值矩阵和隐含层偏移量;用GA-ELM模型对飞行数据进行识别,并与BP神经网络和原始ELM神经网络的识别结果进行对比。结果表明:GA-ELM模型是一种有效且高精度的飞行载荷参数识别方法。     

数控机床铣螺纹用盘形铣刀的近似造型及误差计算

在数控铣床上加工螺纹，需要设计盘形铣刀，本文求导了铣刀宽度计算公式，分析了产生误差的原因，并提出了改进措施。     

自动化计量学大会展出的坐标测量机

介绍自动化计量学大会展出的坐标测量机及其结构，性能和使用范围。