镁基水反应金属燃料的热分解性能

采用热重-差热分析联用(TG-DTA)、差示扫描量热(DSC)、加压热重(PTG)等热分析方法,研究了镁基水反应金属燃料热分解反应的基本特性及其变化规律。研究发现,燃料热分解过程中先后发生AP分解反应、HTPB分解反应,氩气中不发生Mg的氧化反应;添加催化剂、减小AP粒度、增大氧化剂与粘合剂比例、增大细Mg粉含量等,可以降低燃料中AP的分解温度T,减小表观活化能Ea,增大反应速率常数k;减小AP粒度、增大氧化剂与粘合剂比例可以降低燃料中HTPB的分解温度,减小表观活化能Ea,增大反应速率常数k;随着压强增大,AP与HTPB分解失重速率增大、AP失重百分数增大、燃料热分解凝聚相产物质量百分数减少,压强对AP分解影响较大,对HTPB分解影响较小。     

Investigation on surface roughness,residual stress and fatigue property of milling in-situ TiB2/7050Al metal matrix composites

For higher efficiency and precision manufacturing, more and more attentions are focused on the surface roughness and residual stress of machined parts to obtain a good fatigue life. At present, the in-situ TiB₂/7050Al metal matrix composites are widely researched due to its attractive properties such as low density, good wear resistance and improved strength. It is of great significance to investigate the machined surface roughness, residual stress and fatigue life for higher efficiency and precision manufacturing of this new kind material. In this study, the surface roughness including two-dimensional and three-dimensional roughness, residual stress and fatigue life of milling in-situ TiB₂/7050Al metal matrix composites were analyzed. It was found from comparative investigation that the three-dimensional surface roughness would be more appropriate to represent the machined surface profile of milling particle reinforced metal matrix composites. The cutting temperature played a great role on the residual stress. However, the effect of increasing cutting force could slow down the transformation from compressive stress to tensile stress under 270 °C. An exponential relationship between three-dimensional roughness and fatigue life was established and the main fracture mechanism was brittle fracture with observation of obvious shellfish veins, river pattern veins and wave shaped veins in fracture surface.     

SiC/Al复合丝的耐蚀性和高温稳定性研究

本研究结果表明,SiC/L_6和SiC/LF_6复合丝在真空中加热至600℃和在空气中400℃暴露144小时,以及在蒸馏水和5%NaCl水溶液中浸泡15天后,其强度保留率大于87%,证明SiC/Al复合丝具有良好的耐蚀性和高温稳定性,用气相层析仪和发射光谱分析了腐蚀气体、溶液和白色沉淀,初步确定其反应机理是电化学腐蚀。与C/Al复合丝相比,SiC/Al腐蚀速度缓慢,纤维—基体界面损伤极小。     

不等边∏型材弧形零件的滚弯成形

介绍了不等边∏型材弧形零件的成形方法，包括滚床的选择、滚模的设计以及工艺问题的解决。     

The large-scale structure of the heliospheric current sheet during the Ulysses epoch

Space Science Reviews - Ulysses is traversing the Sun's polar regions for the first time a year or two before solar minimum. If the heliospheric magnetic field behaves as we expect, the...     

高温度梯度定向凝固装置的研究

本文介绍了自行设计的具有高温度梯度的定向凝固装置,最高温度梯度可达230℃/cm。该装置温度场的理论分析和实验表明,在炉底部增加一个内径很小的加热圈;在冷却器中采用具有高激冷能力的低熔点Ga-In-Sn液态金属为冷却液;都能显著提高温度梯度和增加稳态凝固区的长度。     

铝合金薄板K_c测试新方法的探讨

通过用圆(或椭圆)孔试件测量金属薄板平面应力断裂韧性Kc的方法,与通过用中心穿透裂纹试件Kc的标准方法相比较之后,将Whitney和Nuismer用于复合层压板中的点应力破坏准则,推广到铝合金薄板Kc的测量。 在理论和实验分析的基础上,拟合出与实验结果相一致的经验公式。     

Friction Stir Welding of Metal Matrix Composites for use in aerospace structures

Friction Stir Welding (FSW) is a relatively nascent solid state joining technique developed at The Welding Institute (TWI) in 1991. The process was first used at NASA to weld the super lightweight external tank for the Space Shuttle. Today FSW is used to join structural components of the Delta IV, Atlas V, and Falcon IX rockets as well as the Orion Crew Exploration Vehicle. A current focus of FSW research is to extend the process to new materials which are difficult to weld using conventional fusion techniques. Metal Matrix Composites (MMCs) consist of a metal alloy reinforced with ceramics and have a very high strength to weight ratio, a property which makes them attractive for use in aerospace and defense applications. MMCs have found use in the space shuttle orbiter's structural tubing, the Hubble Space Telescope's antenna mast, control surfaces and propulsion systems for aircraft, and tank armors. The size of MMC components is severely limited by difficulties encountered in joining these materials using fusion welding. Melting of the material results in formation of an undesirable phase (formed when molten Aluminum reacts with the reinforcement) which leaves a strength depleted region along the joint line. Since FSW occurs below the melting point of the workpiece material, this deleterious phase is absent in FSW-ed MMC joints. FSW of MMCs is, however, plagued by rapid wear of the welding tool, a consequence of the large discrepancy in hardness between the steel tool and the reinforcement material. This work characterizes the effect of process parameters (spindle speed, traverse rate, and length of joint) on the wear process. Based on the results of these experiments, a phenomenological model of the wear process was constructed based on the rotating plug model for FSW. The effectiveness of harder tool materials (such as Tungsten Carbide, high speed steel, and tools with diamond coatings) to combat abrasive wear is explored. In-process force, torque, and vibration signals are analyzed to assess the feasibility of on-line monitoring of tool shape changes as a result of wear (an advancement which would eliminate the need for off-line evaluation of tool condition during joining). Monitoring, controlling, and reducing tool wear in FSW of MMCs is essential to the implementation of these materials in structures (such as launch vehicles) where they would be of maximum benefit.     

金属粉末燃烧装置凝相产物反弹特性实验研究

为获得金属粉末燃烧装置燃烧产物的反弹特性，进而为金属凝相燃烧产物收集装置的设计提供指导，在收集并分析了铁粉燃烧产物特性的基础上，搭建了壁面碰撞反弹装置，开展了凝相燃烧产物与石墨板反弹特性实验研究，获得了铁粉燃烧产物与石墨板碰撞反弹后的法向反弹系数（en）与切向反弹系数（et）随粒子入射速度、入射角度的影响规律，并拟合了反弹系数多项式。结果表明：真实燃烧产物实验条件下，铁粉凝相燃烧产物的入射速度对en和et影响不显著，但入射角度对en和et的影响较大，表现为en随入射角度的增加而增大，et随入射角度的增加先减后增，但增幅较小，当入射角度大于58°时，et又出现减小的趋势。     

SiCp增强体表面改性对铁基复合材料组织性能的影响

为了改善粉末冶金方法制得的SiCp/Fe复合材料性能，采用化学镀的方法，成功地在SiCp表面沉积镍，考察了颗粒表面改性对铁基复合材料组织性能的影响。结果表明，镀镍层的作用明显：第一，阻碍了SiCp/Fe界面的过度反应以及Si原子向基体中的扩散；第二，镀镍层的存在改善了颗粒与基体的界面状况，使得颗粒能够更好地发挥增强体的作用。