一种简化算法的航空发动机全状态数学模型

通过一种简化的燃气空间模型对某型双转子混排加力涡扇发动机各部件进行了建模和仿真计算,并给出了详细的计算流程以及数学公式.在仿真过程中结合实际工程应用经验,对涡轮处采用一个局部的小循环迭代以减小涡轮部件内燃气空间计算的时间步长,提高计算精度.与其他数值方法相比,该简化算法避免了求解非线性方程组时大范围的循环迭代,提高了全状态数学模型的计算速度.通过仿真结果与发动机实际试车数据的对比,证明该方法有足够的计算精度.      

火箭弹垂直发射动力学建模与仿真

首先建立了火箭弹垂直发射的弹道模型,然后研究了升阻比、弹道倾角等参数的变化对火箭弹射程的影响,并分别对这两种情况进行了仿真。仿真结果表明,滑翔飞行时,在一定程度上增大了升阻比,有助于增大火箭弹的射程;另外在转弯结束时,弹道倾角的变化对火箭弹射程也有一定影响。     

Accurate 3D Target Positioning in Close Range Photogrammetry with Implicit Image Correction

Accurate three-dimensional (3D) target positioning is of great importance in many industrial applications. Although various methods for reconstructing 3D information from a set of images have been available in the literature, few of them pay enough attention to the indispensable procedures, such as target extraction from images and image correction having strong influences upon the 3D positioning accuracy. This article puts forward a high-precision ellipse center (target point) extraction method and a new image correction approach which has been integrated into the 3D reconstruction pipeline with a concise implicit model to accurately compensates for the image distortion. The methods are applied to a copyright-reserved close range photogrammetric system. Real measuring experiments and industrial applications have evidenced the proposed methods, which can significantly improve the 3D positioning accuracy.     

Solar signals in the minimum extreme temperature records in the southern region of the Gulf of Mexico

Minimum extreme temperature series from several meteorological stations of the Gulf of Mexico are spectrally analyzed using the Maximum Entropy Method.We obtained significant periodicities similar to those found in meteorological and solar activity phenomena. This indicates that probably the solar activity signals are present in the minimum extreme temperature records of this Mexican region.     

反射器夹层面板精密成形原理

对高精度、大面积不可展双曲反射面的制造问题,提出了基于"离散钉模、真空负压、蜂窝夹层、应力释放、回弹补偿"的高精度反射面板成形原理;建立了四边自由面内多点约束的薄板大挠度弯曲解法及夹层板成形过程仿真模型,用于确定成形工艺参数;利用动力显式和静力隐式算法相结合的方法实现成形过程仿真;通过开缝和开槽方法释放面内压应力,确定了面板开缝和开槽方案;通过逆向修正离散模包络面,使其与成形模拟得到的夹层板型面误差最小,得到模具修正因子,补偿回弹误差.在此基础上开发了夹层板精密成形CAE系统.该方法制造的面板型面精度RMS达到25 μm以下,已成功地应用于多项大型紧缩场和毫米波天线的制造.      

利用RDSS系统测量数据提取电离层TEC参数的研究

提出了一种基于无线测定卫星业务(RDSS)系统观测数据提取电离层TEC参数的方法,利用此方法计算分析了2006年5月地面中心地区电离层垂向TEC的日变化趋势.研究结果表明,利用RDSS系统观测数据提取的电离层垂向TEC,在北京时间每日凌晨0400时左右达到最小值,在午后1400时左右达到最大值,符合电离层TEC参数受太阳活动影响较大的物理规律.结果说明研究方法是可行且有效的,文章还对可能存在的误差进行了探讨.      

高超声速钝锥模型及其尾迹红外辐射实验研究

介绍了利用InSb红外辐射计在弹道靶上测量底部直径为10mm、半锥角和头部半径分别为9°、2.2mm(模型A),8°、0.6mm(模型B)的两种非烧蚀钝锥模型及其尾迹的红外辐射.模型速度大于6km/s,飞行环境压力约4.8kPa,红外辐射测量波段为1~3μm、3~5μm.结果表明:非烧蚀钝锥模型头身部红外辐射远大于尾迹红外辐射,在相同飞行速度和环境压力条件下,模型A产生的红外辐射比模型B产生的红外辐射强.     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.     

用最大值原理求某无人机的最优上升轨迹

为改进某无人机飞行性能，应用最大值原理求解无人机在垂直平面内的最优上升轨迹，推导了无人机最经济爬升所满足的极值方程；并用此方程和最快爬升极值方程这两类目标函数求解了某无人机的最优上升轨迹，计算结果表明，经优化后的爬升轨迹可以节省燃油，延长无人机的续航时间或快速爬升到预定的终点高度具有较好的性能收益。     

Geometry and size optimization of stiffener layout for three-dimensional box structures with maximization of natural frequencies

Based on the growth mechanism of natural biological branching systems and inspiration from the morphology of plant root tips, a bionic design method called Improved Adaptive Growth Method (IAGM) has been proposed in the authors’ previous research and successfully applied to the reinforcement optimization of three-dimensional box structures with respect to natural frequencies. However, as a kind of ground structure methods, the final layout patterns of stiffeners obtained by using the IAGM are highly subjected to their ground structures, which restricts the optimization effect and freedom to further improve the dynamic performance of structures. To solve this problem, a novel post-processing geometry and size optimization approach is proposed in this article. This method takes the former layout optimization result as start, and iteratively finds the optimal layout angles, locations, and lengths of stiffeners with a few design variables by optimizing the positions of some specific node lines called active node lines. At the same time, thicknesses of stiffeners are also optimized to further improve natural frequencies of three-dimensional box structures. Using this method, stiffeners can be successfully separated from their ground structures and further effectively improve natural frequencies of three-dimensional box structures with less material consumption. Typical numerical examples are illustrated to validate the effectiveness and advantages of the suggested method.