运动油滴/固体壁面斜碰撞的状态辨识及特征分析

 航空发动机轴承腔油气两相流动与换热研究是轴承腔润滑与换热设计的重要基础工作,而运动油滴与轴承腔壁面的碰撞状态辨识及特征分析是轴承腔油气两相流动与换热研究的组成部分。基于VOF方法建立了运动油滴与固体壁面斜碰撞数值仿真模型,实现了运动油滴与固体壁面斜碰撞状态的数值模拟,分析了碰撞油滴直径、入射角和碰撞速度对沉积油膜铺展长度、油膜堆积厚度和溅射油滴数目等碰撞状态特征参数的影响规律,提出了运动油滴与固体壁面斜碰撞条件下的状态判断准则,并得到了文献的物理试验工作的支持。研究结果表明:随着油滴入射角减小,沉积油膜铺展长度和油膜堆积厚度增大,溅射油滴数目减少;随着碰撞速度和油滴直径的增大,沉积油膜铺展长度和溅射油滴数目均增大,但油膜堆积厚度对应前者呈减小趋势、对应后者仍呈增大趋势。     

Effects of yaw-roll coupling ratio on the lateral-directional departure prediction and restraint

The experimental data obtained from yaw-roll coupled wind tunnel tests are used for lateral-directional departure prediction, by linearizing the_b model to extract nominal dynamic derivatives at each coupling ratio.The prediction results are compared with those of the existing engineering methods which are based on the conventional aerodynamic derivatives.The comparison shows that the yaw-roll coupling ratio has a great influence on the departure susceptibility.The departure resistance will loss in partial region of the coupling ratio when the angle of attack is higher than a critical value.According to the stable and unstable regions of coupling ratio, a two-segment stability augmentation system with two different feedback gain matrices is obtained by pole-placement method.The two-segment stability augmentation system is used in the simulations of straight and level flight, steady turn, spin recovery and Herbst maneuver.The simulation results are also compared with the applications of a fixed-gain stability augmentation system designed by the conventional aerodynamic derivatives.When the yaw-roll coupling effects are fully considered, the two-segment stability augmentation system is more effective for departure restraint and can provide a better flying quality with less control energy.     

机载风切变系统告警准则研究

根据风切变对飞机飞行影响的机理,以及FAA对CATⅠ类着陆最坏条件下的边界要求,推导了风切变的危险程度判据。通过计算,分析了垂直风切变与水平风切变对飞行性能的影响的异同,并通过对危险判据与性能恶化参数的相关性研究,提出了适用于机载风切变探测告警系统的告警准则。     

A user-friendly yield criterion for metals exhibiting tension-compression asymmetry

The aim of this paper is to model the yielding asymmetry of pressure-insensitive metals, including but not limited to Ni₃Al alloys. The main focuses are put on the flexibility and manipulative convenience. The parameters of theory are kept to a minimum and can be determined by as few tests as possible. These requirements are fulfilled by constructing a yield function using the second and third-invariants of a linearly transformed stress tensor. The proposed yield criterion has a simple mathematical form and has only seven parameters when used in three-dimensional stresses. Compared with existing theories, the new yield criterion has much fewer parameters, which makes it very convenient for practical applications. The coefficients of the criterion are identified by an error minimization procedure. Applications to a Ni₃Al based intermetallic alloy as well as a Cu-Al-Be shape memory alloy and comparison to other criteria show that the proposed criterion has nearly the same predictive ability and flexibility with other criteria. The proposed yield criterion can estimate the coefficients by using less data, which is a big advantage compared with other similar theories, especially when there is a limited number of experimental data.     

Passive localization by a single moving observer using TOA only with unknown SRI: Observability analysis and algorithm

Passive localization by a single moving observer using Time of Arrival (TOA) only with an unknown Signal Repetition Interval (SRI) is investigated in this paper. Observability analysis is performed first. The observability condition for uniquely determining the emitter position and SRI is derived. The conditional Cramer-Rao Lower Bound (CRLB) is also analyzed. It is found that the ambiguity of the SRI integer of the first TOA does not affect the theoretical estimation precision of the emitter position and SRI. A Reference-Fixed Differential TOA (RFDTOA)-based Iterative Maximum Likelihood Estimator (IMLE) is proposed, which only needs O(M) computational operations. Theoretical analysis and simulation results show that the Mean Square Error (MSE) of the proposed algorithm could attain the CRLB with moderate Gaussian measurement noise.     

浅析"三大规范"编写

本文较为详细地介绍了中国燃气涡轮研究院“三大规范”编制与实施过程中的目标的确定、总体规划、采取的措施、应用效果、存在的问题及解决方法,可为同行编制“三大规范”提供借鉴和参考。     

一种双时间尺度函数Wiener过程性能退化模型

为通过性能退化数据评估产品的可靠性,基于广义Wiener过程提出了一种双时间尺度函数模型以描述产品退化过程。采用极大似然估计(MLE)法求解模型参数,推导了其寿命分布(FTD),进而进行可靠度分析和寿命评估。对模型进行了Monte Carlo模拟验证和实例应用,并将目前常用的混合效应Wiener过程模型作为参考方法进行了对比分析。结果表明:根据90%可靠度曲线的定义,该方法较参考方法的结果更为合理、准确。进一步的寿命评估结果表明,该方法与参考方法的平均寿命相差232.9h,90%可靠寿命结果相差109.4h,且参考方法计算结果偏于危险。      

关于轰燃定义、机理和判据的讨论与分析

通过对常见的几种轰燃定义的对比分析,对轰燃进行了新的定义,认为轰燃是室内火灾发展到一定阶段引起非连续介质着火燃烧的现象;在此基础上,根据燃烧学原理提出了轰燃发生的机理,即可燃挥发份和高温烟气层接触发生的剧烈氧化还原反应;并提出了预测轰燃的通用判据,即火灾时室内其它可燃物热解产生的可燃挥发份迅速和空气混合,达到其着火浓度下限且接触到超过可燃物自燃点的高温烟气层。     

Improvement of Jahangir＇ s multiple moments estimator

在M.Jahangir以常数为权的组合式矩估计器的基础上,给出一种以函数为权的组合式矩估计器,称为L-J估计器.其中,最优加权函数是根据U估计器与形状参数的单调关系,通过数论网格最优化算法搜索解出.大量仿真实验证实,在对K分布形状参数v大范围的参数估计中,L-J估计器在估计精度上,不但较Jahangir等提出的常数加权组合矩估计器的精度有显著提高,而且可与MLE（Maximum Likelihood Estimator）相当.特别是由于MLE作为渐进无偏估计量,需要充分大的样本长度才能达到最优,这就使得L-J估计器的估计精度可在样本长度较小时优于MLE.此外,L-J估计器无需迭代运算,因而在计算效率上,显著优于现有的ML估计器.     

驾驶员模型对驾驶员诱发振荡评估结果的影响

在飞机设计中,应用不同的驾驶员模型来预测驾驶员诱发振荡(PIO)是避免人机系统出现不良耦合的重要途径之一。以人-机闭环系统为研究对象,以某一电传飞机为例,采用Ⅱ型PIO的开环发生点OLOP评估准则,分别使用增益驾驶员模型和修正Neal-Smith驾驶员模型对人机闭环系统中的PIO易感性进行了分析、评估,对比研究了不同驾驶员模型对OLOP评估准则评估结果的影响。仿真结果表明:不同的驾驶员模型对Ⅱ型PIO评估准则(OLOP)的评估结果有较大的影响,相同驾驶员模型下不同的驾驶员增益对评估结果也有影响。在使用OLOP评估准则时应充分考虑驾驶员模型对评估结论的影响。