钢管混凝土柱极限承载力分析的分段合成法

在计算钢管混凝土受压构件弹塑性极限承载力的合成法基础上,提出了一种新的数值计算方法--分段合成法,计算假设仅包括平截面假设和考虑紧箍力影响的钢管混凝土的应力-应变关系,取消了原合成法中对柱变形曲线的假设,积分时不仅需要在截面上划分单元而且还需沿杆长划分单元,因而可考虑柱多个截面的平衡条件.与原合成法相比,该方法不仅适用于轴压构件和两端偏心距相等的偏压构件,而且还适用于两端偏心距不等的偏压构件的弹塑性极限承载力计算.利用提出的方法和程序,计算了圆形截面钢管混凝土轴压长柱、两端偏心距相等的偏压长柱以及两端偏心距不等的偏压长柱的弹塑性极限承载力,理论分析结果与文献中的理论结果和试验结果均吻合良好.     

Attitude Control Considering Variable Input Saturation Limit for a Spacecraft Equipped with Flywheels

A new attitude controller is proposed for spacecraft whose actuator has variable input saturation limit. There are three identical flywheels orthogonally mounted on board. Each rotor is driven by a brushless DC motor (BLDCM). Models of spacecraft attitude dynamics and flywheel rotor driving motor electromechanics are discussed in detail. The controller design is similar to saturation limit linear assignment. An auxiliary parameter and a boundary coefficient are imported into the controller to guarantee system stability and improve control performance. A time-varying and state-dependent flywheel output torque saturation limit model is established. Stability of the closed-loop control system and asymptotic convergence of system states are proved via Lyapunov methods and LaSalle invariance principle. Boundedness of the auxiliary parameter ensures that the control objective can be achieved, while the boundary parameter’s value makes a balance between system control performance and flywheel utilization efficiency. Compared with existing controllers, the newly developed controller with variable torque saturation limit can bring smoother control and faster system response. Numerical simulations validate the effectiveness of the controller.     

Analysis of data of “Clementine” and “KAGUYA” missions and “ULCN” and “KSC-1162” catalogues

In this paper an analysis of data coordinate systems from selenographic catalogues and space missions was carried out. The lunar macrorelief models were made on basis of the software package ASNI USTU using method of the spherical harmonic expansion. These models accurately describe the global features of the lunar figure. To construct these models the following sources of topographic information were used: “Clementine” and “KАGUYА” (Selena, Japan mission) missions, “KSC-1162” (Kazan selenocentric catalogue), “Kiev” (selenodesic catalogue), “SAI” (Chuikova (1975)), “Bills, Ferrari”, “ULCN” (The Unified Lunar Control Network 2005). Direct comparison hypsometric information “KSС-1162” catalogue data with “Clementine” mission was carried out. These researches confirmed a good agreement of the hypsometric information of compared systems. The normalized coefficients were obtained on basis of the hypsometric information expansion for eight sources. The displacement of the lunar center of mass (LCM) relatively to the lunar center of figure (LCF) was obtained by using topographic data selenodetical catalogues and space missions.     

基于非参数假设检验的程序缺陷定位方法

调查了西门子测试集中的程序失败用例的规模和谓词评估偏差的分布.结果表明,中心极限定理的前提和参数假设检验的假设条件无法得到普遍满足.所以,已有的基于参数假设检验的方法存在潜在的问题.针对这一现象,提出了基于非参数假设检验定位程序缺陷的方法.实验结果表明,该方法在非正态分布的样本集上仍具有较好的适用性,且在缺陷定位效率上优于已有的基于程序谓词的缺陷定位技术.同时比较了基于2种常用的非参数假设检验模型的缺陷定位方法的效率.一种方法基于Kolmogorov-Smirnov检验,另一种方法基于Cramér-von-Mises准则.比较结果表明,在西门子测试集上,基于Kolmogorov-Smirnov检验的方法在缺陷定位效率上优于基于Cramér-von-Mises准则的方法.     

Identifying areas of high economic-potential copper mineralization using ASTER data in the Urumieh–Dokhtar Volcanic Belt,Iran

This study investigates the application of spectral image processing methods to ASTER data for mapping hydrothermal alteration zones associated with porphyry copper mineralization and related host rock. The study area is located in the southeastern segment of the Urumieh–Dokhtar Volcanic Belt of Iran. This area has been selected because it is a potential zone for exploration of new porphyry copper deposits. Spectral transform approaches, namely principal component analysis, band ratio and minimum noise fraction were used for mapping hydrothermally altered rocks and lithological units at regional scale. Spectral mapping methods, including spectral angle mapper, linear spectral unmixing, matched filtering and mixture tuned matched filtering were applied to differentiate hydrothermal alteration zones associated with porphyry copper mineralization such as phyllic, argillic and propylitic mineral assemblages.     

空间碎片现状与清理

分析了空间碎片的严峻现状和空间碎片的10个来源,指出轨道碰撞是产生碎片最多的因素;介绍了空间碎片的观测方法、原理和观测系统的概况,包括正在兴建的观测系统——“空间篱笆”。最后,根据不同轨道高度和空间碎片的数量与大小,提出空间碎片清理原则、要求和9种清理方法。     

Aerodynamic design of tractor propeller for high-performance distributed electric propulsion aircraft

Aiming to maximize the aerodynamic performance of the Distributed Electric Propulsion (DEP) aircraft, a hybrid design framework which focuses on the aerodynamic performance of the propeller/wing integration has been developed and validated numerically. Variable-fidelity modelling for propeller aerodynamics has been used to achieve computational efficiency with reasonable accuracy. By optimizing the aerodynamic loading distributions on the tractor propeller disk, the induced slipstream is redistributed into a form that is beneficial for the wing downstream, based on which the propeller blade geometry is generated through a rapid inversed design procedure. As compared with the Minimum Induced Loss (MIL) propeller at a specified thrust level, significant improvements of both the lift-to-drag ratio of the wing and the propeller/wing integrated aerodynamic efficiency is achieved, which shows great promise to deliver aerodynamic benefits for the wing within the propeller slipstream without any additional devices.     

民机数字档案馆的建设探索

民用飞机研发项目是国家重大专项之一,采用了先进的全数字化设计技术。其主制造商-供应商的研发模式对档案管理工作提出了新的要求,有必要建立民机数字档案馆以满足大量电子文件的管理需要和跨地区协同工作对档案利用的需求。对民机数字档案馆的基本架构及构建方式进行了探讨。     

Studies of the geocenter motion using 16-years DORIS data

An accuracy of geocenter motion estimation is strongly dependent on the geodetic network size and stations distribution over the Earth’s surface. From this point of view DORIS system has an advantage, as its ground network of beacons consists of more than 50 sites, equally distributed over the Earth’s surface. Aiming to study variations of the geocenter movements, the results of DORIS data analysis for the time span 1993.0–2009.0 (inawd06.snx series), performed at the Analysis Centre of the Institute of astronomy of the Russian Academy of Sciences, have been used. DORIS data processing was made with GIPSY/OASIS II software, developed by Jet Propulsion Laboratory and modified for DORIS data processing by Institute Géographique National. Standard deviations of stations coordinates are estimated at the level 0.5–4.0 cm (internal consistency), depending on the number of satellites used in the solution. RMS of estimated components of the DORIS satellites orbits, compared with the solutions of other IDS analysis centres, do not exceed 1–2 cm. Weekly solutions for coordinates have been transformed from free network solutions (inawd06.snx series) to a well defined terrestrial reference frame ITRF2005 with the use of seven parameters of Helmert transformation, which were examined with a view to study variations of the geocenter movements (ina05wd01.geoc time series). In order to estimate linear trend, amplitudes, periods and phases of geocenter variation a method of linear regression was applied. The evaluated amplitudes of annual variations are of the order of 5–7 mm for X and Y components and 27–29 mm for Z component. Semi-annual amplitudes are also noticeable in all components (1–34 mm for X, Y and Z components). Secular trends in the DORIS geocenter coordinates are: −1.2, −0.1 and −0.3 mm/year for X, Y and Z directions respectively.     

带VSCMGs的航天器姿态稳定及功率补偿控制

基于变速控制力矩陀螺群动力学模型建立其复合控制方程和分系统解耦约束方程,用矩阵投影方法同步设计得到航天器姿态与能量一体控制复合操纵律,利用Lyapunov方法分析了转子轴向惯量误差对姿态控制分系统的影响.根据飞轮转子轴向惯量与功率输出之间的误差关系设计出功率控制补偿器.复合操纵律中的力矩和功率两解形式相同,约束方程使得姿态与能量控制两分系统解耦,便于进行考虑执行机构特性的闭环控制系统性能分析.考虑飞轮转子轴向惯量误差时,姿态控制分系统的输出耗散特性使其能够保持稳定,而功率控制分系统输出误差与转子轴向惯量误差成比例关系,经过补偿后功率输出能满足控制要求.