火星探测着陆系统开伞控制方法研究

文章通过对火星探测进入轨道的分析，提出了一种以动压为控制目标的开伞控制方法，并借鉴过载-时间控制法的相关思想，结合火星探测进入轨道的特点，研究了该开伞控制法的原理和实现方法。根据火星探路者的实际进入条件，采用该方法的分析结果与实际飞行中的开伞情况基本吻合。     

航磁补偿技术及补偿质量的评价方法

航磁补偿的目的是要消除飞机平台引入的干扰磁场,对于高精度航空磁探来说,磁补偿质量直接制约了探测效果。文章按照航磁补偿的执行步骤进行了飞机平台磁干扰建模、模型参数求解方法、补偿飞行方案。另外,为了对补偿飞行的质量进行有效控制,采用量化指标对磁补偿效果进行评价,判定补偿效果的优劣。最后,基于 MFC软件平台开发了航磁补偿系数求解及补偿质量评价软件。     

地月空间探索与开发的思考

提出了地月空间探索与开发的概念,对全球发展态势进行了总结,从人类文明、太空格局、战略安全、科技经济全方位发展等维度阐述了我国开展地月空间探索与开发的发展需求;并提出了地月空间探索与开发的体系组成、能力需求和技术难点,从科学、经济和工程三个方面分析了发展效益,最后给出了发展路线;研究成果可为未来大规模开展地月空间探索与开发提供参考。     

火星车转移坡道柔顺性优化设计及动力学分析

对一种抽展式火星车转移坡道开展柔顺性优化设计和动力学分析。首先,分析火星车与存在异面角的坡道的挤压几何原理。然后,设计坡道的间隙机构和限位机构,并计算出机构关键设计参数的最优值,以自适应调整两侧坡道的距离,〖JP2〗减小火星车与坡道护栏之间的相互作用力。最后,对坡道下落过程和火星车在坡道上的行驶过程进行动力学仿真,验证坡道柔顺性优化设计的效果。结果表明：优化后的坡道柔顺性大幅提高,坡道可以自适应调整两侧的距离;使用优化后的坡道,可以有效降低火星车与坡道护栏的作用力,实现火星车在坡道上的安全行驶。     

首颗自主地月转移微卫星“龙江二号”

本文对世界首颗独立完成地月转移、近月制动、环月飞行的微卫星“龙江二号”进行了介绍。首先阐述了龙江二号的任务目标和总体方案;然后重点分析了轨道设计与控制、复杂电磁干扰的标定与抑制、宽视场三维基线干涉测量等关键技术难点;接着回顾了任务的实施过程;最后详细介绍了低频射电探测仪、沙特光学相机和VHF/UHF通信模块与学生微型CMOS相机等有效载荷,并展示了上述载荷获取的初步成果。     

超导重力仪器:机遇与挑战

超导重力仪器是利用超导电性构建的精密相对重力测量仪器,其工作于4.2K液氦温度,具有仪器固有噪声低、稳定性好的特点。阐述了超导重力仪和超导重力梯度仪两种仪器的工作原理与技术特征,简要介绍了作者所在课题组超导重力仪器研制的进展情况。分析了我国资源勘查用航空超导重力梯度仪研制所面临的机遇与挑战,提出了应对技术挑战的策略方法。     

Survival and death of the haloarchaeon Natronorubrum strain HG-1 in a simulated martian environment

Halophilic archaea are of interest to astrobiology due to their survival capabilities in desiccated and high salt environments. The detection of remnants of salty pools on Mars stimulated investigations into the response of haloarchaea to martian conditions. Natronorubrum sp. strain HG-1 is an extremely halophilic archaeon with unusual metabolic pathways, growing on acetate and stimulated by tetrathionate. We exposed Natronorubrum strain HG-1 to ultraviolet (UV) radiation, similar to levels currently prevalent on Mars. In addition, the effects of low temperature (4, −20, and −80 °C), desiccation, and exposure to a Mars soil analogue from the Atacama desert on the viability of Natronorubrum strain HG-1 cultures were investigated. The results show that Natronorubrum strain HG-1 cannot survive for more than several hours when exposed to UV radiation equivalent to that at the martian equator. Even when protected from UV radiation, viability is impaired by a combination of desiccation and low temperature. Desiccating Natronorubrum strain HG-1 cells when mixed with a Mars soil analogue impaired growth of the culture to below the detection limit. Overall, we conclude that Natronorubrum strain HG-1 cannot survive the environment currently present on Mars. Since other halophilic microorganisms were reported to survive simulated martian conditions, our results imply that survival capabilities are not necessarily shared between phylogenetically related species.     

火星磁层顶形成和变化的理论研究

考虑太阳风动压与行星电离层中的带电粒子热压及磁压之和平衡,建立了有大气（电离层）的行星磁层顶形成的理论模型,结合卫星对火星的观测数据,对子午面内向日侧火星磁层顶位形进行了数值计算和分析,研究了火星磁层顶位形及其与太阳风动压之间的变化关系．结果认为,火星磁层顶位形与地球磁层顶相似．太阳风动压越大,火星磁层顶越靠近火星;太阳风动压越弱,火星磁层顶越远离火星．根据火星内秉磁矩从古到今逐渐减小的观点,探索了大尺度磁场（内禀磁矩）对火星磁层顶的贡献作用,结果认为大尺度磁场越强,火星磁层顶越远离行星．这对于进一步研究火星磁层的长期演化以及其他行星磁层的位形变化都具有重要的意义．     

表面处理对聚酰亚胺柔性复合材料粘结性能的影响

使用聚酰亚胺(PI)膜和PI纤维编织布制备深空探测用柔性织物复合材料,研究表面处理对PI膜和PI纤维编织布之间粘结性能的影响。采用自制表面处理剂分别对PI膜和PI纤维编织布的表面进行处理,再经硅橡胶胶黏剂粘结制备柔性复合材料。使用T剥离强度试验方法测试柔性织物复合材料的层间胶接性能,并分析复合材料剥离面的形貌状态。结果显示,PI膜和PI织物的表面处理可以显著提高柔性织物复合材料的T剥离强度。其中,PI膜和PI织物未经表面处理时,柔性织物复合材料的T剥离强度为8.9 N/cm。对PI膜进行表面处理,或者对PI膜和PI织物均进行表面处理的情况下,柔性织物复合材料的T剥离强度增加至11.7 N/cm和12.8 N/cm,分别提高了31.5%和43.8%。这表明对PI膜及PI织物进行合理的表面处理,可以显著提高柔性织物复合材料的胶接性能。     

Planetary protection issues related to human missions to Mars

In accordance with the United Nations Outer Space Treaties [United Nations, Agreement Governing the Activities of States on the Moon and Other Celestial Bodies, UN doc A/RES/34/68, resolution 38/68 of December 1979], currently maintained and promulgated by the Committee on Space Research [COSPAR Planetary Protection Panel, Planetary Protection Policy accepted by the COSPAR Council and Bureau, 20 October 2002, amended 24 March 2005, http://www.cosparhq.org/scistr/PPPolicy.htm], missions exploring the Solar system must meet planetary protection requirements. Planetary protection aims to protect celestial bodies from terrestrial contamination and to protect the Earth environment from potential biological contamination carried by returned samples or space systems that have been in contact with an extraterrestrial environment. From an exobiology perspective, Mars is one of the major targets, and several missions are currently in operation, in transit, or scheduled for its exploration. Some of them include payloads dedicated to the detection of life or traces of life. The next step, over the coming years, will be to return samples from Mars to Earth, with a view to increasing our knowledge in preparation for the first manned mission that is likely to take place within the next few decades. Robotic missions to Mars shall meet planetary protection specifications, currently well documented, and planetary protection programs are implemented in a very reliable manner given that experience in the field spans some 40 years. With regards to sample return missions, a set of stringent requirements has been approved by COSPAR [COSPAR Planetary Protection Panel, Planetary Protection Policy accepted by the COSPAR Council and Bureau, 20 October 2002, amended 24 March 2005, http://www.cosparhq.org/scistr/PPPolicy.htm], and technical challenges must now be overcome in order to preserve the Earth’s biosphere from any eventual contamination risk. In addition to the human dimension of the mission, sending astronauts to Mars will entail meeting all these constraints. Astronauts present huge sources of contamination for Mars and are also potential carriers of biohazardous material on their return to Earth. If they were to have the misfortune of being contaminated, they themselves would become a biohazard, and, as a consequence, in addition to the technical constraints, human and ethical considerations must also be taken into account.