基于嵌入式MATLAB函数编程的火星车能量平衡仿真系统

在以往航天器研制过程中,电源系统能量平衡分析是基于表格化计算的方法,其运算效率低、显示不直观。文章提出了一种可视性强、易编程、更通用的能量平衡分析方法,即采用嵌入式MATLAB函数对电源系统能量平衡分析的功能模块进行编程实现,以火星车电源系统为应用背景,在MATLAB/SIMULINK平台上搭建了一套用于能量平衡分析的仿真系统,并在特定实例下进行仿真分析,仿真结果采用图表曲线形式显示,能清晰、直观地反映能源利用的动态变化趋势,可为电源系统方案优化设计提供参考依据。     

New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

Roadmap to a human Mars mission

We propose a new roadmap for the preparation of the first human mission to Mars. This proposal is based on the work of ISECG and several recent recommendations on human Mars mission architectures. A table is proposed to compare the possible benefits of different preparatory missions. Particular attention is paid to the possibility of qualifying important systems thanks to a heavy Mars sample return mission. It is shown that this mission is mandatory for the qualification of Mars aerocapture at scale-1, EDL systems at scale 1 and Mars ascent. Moreover, it is a good opportunity to test many other systems, such as the heavy launcher and the transportation systems for the trips beyond LEO. These tests were not mentioned in the last ISECG report. This strategy is facilitated in the case of the simplified Mars mission scenarios that have recently been presented because it is suggested that relatively small vehicles with small crew sizes are used in order to optimize the payload mass fraction of the landing vehicles and to avoid the LEO assembly. An important finding of the study is that a human mission to the surface of the Moon is not required for the qualification of the systems of a human mission to Mars. Since affordability is a key criterion, two important missions are proposed in the roadmap. The first is a heavy Mars sample return mission and the second is a manned mission to a high Earth orbit or eventually to the vicinity of the Moon. It is shown that both missions are complementary and sufficient to qualify all the critical systems of the Mars mission.     

An innovative navigation scheme of powered descent phase for Mars pinpoint landing

Pinpoint landing (within 100 m from the target) is essential for future Mars exploration missions. This paper deals with one aspect of the pinpoint landing architecture—the navigation performance improvement during the powered descent phase, and proposes an innovative navigation scheme to obtain the vehicle complete and accurate states. On the basis of dead reckoning relying on the Inertial Measurement Unit, measurements of the Integrated Doppler Radar are adopted to correct the vehicle velocity and altitude. Distance between the vehicle and one Mars Orbiter as well as their line-of-sight relative velocity is measured by a radio sensor, and integrated in the filter to correct the vehicle horizontal position. The innovative navigation system is based on an Extend Kalman Filter. Two observation schemes are developed. One considers measurements of the Integrated Doppler Radar and radio range measurement. Another further considers radio velocity measurement. The performance of the innovative navigation scheme is greatly influenced by the position of the Mars Orbiter with respect to the target. Stochastic analyses are performed to obtain optimal locations of Mars Orbiter. Finally, the innovative navigation scheme performances are assessed through stochastic simulations. Its performance improvements are demonstrated by comparison with the Integrated Doppler Radar only navigation scheme.     

气球型深空探测器技术研究进展

气球型深空探测器能够大大提高深空探测的机动能力,它不仅可以获取区域范围内的高分辨率观测数据,而且还可实现不同高度大气的原位测量。文章针对气球型深空探测器按技术特征进行了分类,并简述了各类气球探测器的原理和特点,重点总结了各类气球探测器在金星、火星和土卫六上应用的研究现状。针对我国未来的气球型深空探测器技术发展,提出首先以火星热气球为发展方向,与地球临近空间浮空器技术的发展彼此借鉴,促进关键技术领域的技术突破等建议,可为我国未来深空探测提供参考。     

用于火星探测的电子分析器定标

用于火星探测的电子分析器采用了带偏转板的同轴圆柱形静电分析器, 该传感器方案在满足性能指标的同时实现了小型化. 利用法国空间辐射研究中心(CESR)的电子源, 对电子分析器两个传感器通道的静电分析器因子、能量分辨率、偏转板偏转因子、 方位角分辨率和极角分辨率进行了定标. 给出了上述参数的定标结果, 并对结果进行了分析. 结果表明,仪器的能量范围、能量分辨率、方位角视场及角度分辨率等参数均优于指标要求. 定标结果为电子分析器在轨数据处理和分析以及在轨运行参数设置提供了依据.      

一种新型火星定点着陆轨迹快速优化方法

针对火星定点着陆任务大气进入段的轨迹规划问题,给出了一种基于hp Radau伪谱法的快速优化算法。综合考虑大气进入段的动力学约束、边值约束、以及着陆器的机动能力约束和安全性约束,结合hp Radau伪谱法的配点特性,将轨迹优化问题转换成一个大规模多约束参数优化问题,给出了大气进入段轨迹优化问题的求解框架;为了提高算法的计算效率,给出了参数优化过程中雅克比矩阵的解析表达式;并通过数学仿真对本文算法进行了数值验证,结果表明：     

深空探测器被动式高精度多普勒测量方法与应用

针对深空探测器的单程多普勒测量需求,研究了被动式高精度多普勒测量方法及其实现技术。该方法基于探测器测控信标残留载波等点频信号和VLBI测站高精度氢原子钟频标,构造出与实际接收信号频率接近的参考信号;再通过本地相关处理,完成高精度开环多普勒测量。其特色在于完全不需要精确的先验轨道模型。所开发的专用被动式多普勒测量设备,在国内第一次成功用于欧空局环火星探测器“MEX”的多普勒测定轨试验。探测器X频段信号5s积分的单程多普勒测量精度达到 0.2mm/s ,与欧空局测量水平相当。采用该多普勒测量数据的MEX定轨结果与欧空局精密轨道在数百米至千米量级一致。     

火星气囊气体发生器充气过程稳压仿真研究

文章对低温和常温环境下的气囊稳压充气过程的参数进行了仿真计算。主要分析计算了气囊内外壁的对流换热、囊内气体与囊壁间辐射以及水蒸气液化等传热方式的传热量。同时,计算了在不同环境温度下,气囊内气体温度、充气质量以及充气质量流率随时间的变化关系。分析结果可以为工程研制提供参考和数据支持。     

一种三元结构的火星采样返回任务方案分析

介绍了目前国外提出的一种三元结构的火星采样返回任务方案,整个方案分3次发射,分别发射漫游车、着陆器和轨道器,每次发射间隔为4年,最终目的是将火星样品带回地球。该方案的优势在于,通过3次发射分别完成漫游车巡视勘察、着陆器现场探测、轨道器数据中继和在轨探测,最终综合完成火星采样返回,能够极大地缓解项目进度和资金压力,充分利用每次发射窗口分步骤完成探测任务。文章重点对方案涉及的关键技术进行了分析,包括样品获取与封装、行星保护、精准着陆、漫游车的危险规避能力和移动性、火星上升器、交会与样品捕获、地球再入器技术等;对方案的前景和优势进行了探讨,并给出几点启示,如精准着陆或成为今后行星探测着陆方式的新趋势,火星采样返回任务将是人类火星探测的里程碑,今后的深空探测任务趋向国际合作模式等。