YHF2/VAX4500仿真系统应用技术研究

介绍了YHF2/VAX4500仿真系统的系统结构,并以弹道导弹及运载火箭控制系统半实物仿真为背景,对半实物仿真所涉及到的一些仿真技术进行了分析总结,以期对其它仿真系统下进行的半实物仿真有所借鉴.     

再入体六自由度半实物仿真软件系统设计

在飞行器控制系统的设计过程中,半实物仿真发挥了重要的作用。本文简要介绍了再入体六自由度控制系统半实物仿真的系统结构与软件系统设计,并探讨了相应的仿真技术途径。试验结果表明,该软件系统为半实物仿真试验的顺利进行提供了必要保障。     

软件接收机中调频信号的一种解调算法

本文提出了软件接收机中调频信号解调的一种算法，文章最后给出了一个具体实例的仿真结果。     

分布式实时控制系统执行软件的研究与设计

 用“数据驱动”(Data-Driven)和“事件驱动”(Event-Driven)代替常规的“时间驱动”(Time-Driven)作为分布式实时控制系统执行软件的驱动机制,可以使系统中数据传输效率和系统的实时性都有较大的提高。本文所述的执行软件在这方面做了一些尝试,取得了较好的效果。     

结构疲劳试验中的控制软件

本文介绍了全机结构疲劳试验中的加载过程及数据采集过程的数学描述;并对加载控制软件中加载载荷谱设置及协调控制方法作了论述。     

车身三坐标检测数据图形分析软件开发

根据三坐标测量机检测汽车车身后输出的数据特点,提出了一种计算机图形分析方法,并介绍了软件的编制.实施后,大大减少了车身精度分析时间,提高了分析准确性,并有效地提高了白车身质量.     

适用于空间通信的LDPC码GPU高速译码架构

鉴于目前空间通信对高速、可重配置信道译码器的需求,利用图形处理器(GPU)的并行化运算特点,提出了一种低密度奇偶校验(LDPC)码软件高速译码架构。通过优化Turbo消息传递译码(TDMP)算法节点更新运算线程块内和块间并行度、减少非规则行重造成的线程分支、降低线程对节点更新信息存储资源的访问延时以及合理量化译码器存储信息来提升译码内核函数的执行效率。并在此基础上引入异步统一计算设备构架(CUDA)流处理机制,设计优化的译码器输入输出数据传输和内核函数之间的执行调度方式以及CUDA流上的译码线程资源配置方式,最大化译码吞吐率的同时降低译码延时。在Nvidia最新的Tesla K20和GTX980平台上对国际空间数据系统咨询委员会(CCSDS)遥测标准LDPC码进行的TDMP译码实验结果表明,本架构进行10次迭代译码的吞吐率最高可达约500 Mbps,平均译码延时约为2ms左右。与现有结果相比,本架构在保持软件架构配置灵活性的同时更加有效的兼顾了译码吞吐率和延时性能。     

End-to-end validation process for the INTA-Nanosat-1B Attitude Control System

This paper describes the end-to-end validation process for the Attitude Control Subsystem (ACS) of the satellite INTA-NanoSat-1B (NS-1B). This satellite was launched on July 2009 and it has been fully operative since then. The development of its ACS modules required an exhaustive integration and a system-level validation program. Some of the tests were centred on the validation of the drivers of sensors and actuators and were carried out over the flying model of the satellite. Others, more complex, constituted end-to-end tests where the concurrency of modules, the real-time control requirements and even the well-formedness of the telemetry data were verified. This work presents an incremental and highly automatised way for performing the ACS validation program based on two development suites and an end-to-end validation environment. The validation environment combines a Flat Satellite (FlatSat) configuration and a real-time emulator working in closed-loop. The FlatSat is built using the NS-1B Qualification Model (QM) hardware and it can run a complete version of the on-board software with the ACS modules fully integrated. The real-time emulator, running on an industrial PC, samples the actuation signals and emulates the sensors signals to close the control loop with the FlatSat. This validation environment constitutes a low-cost alternative to the classical three axes tilt table, with the advantage of being easily configured for working under specific orbit conditions, in accordance with any of the selected tests. The approach has been successfully applied to the NS-1B in order to verify different ACS modes under multiple orbit scenarios, providing an exhaustive coverage and reducing the risk of eventual errors during the satellite's lifetime. The strategy was applied also during the validation of the maintenance and reconfiguration procedures required once the satellite was launched. This paper describes in detail the complete ACS validation process that was performed and it shows the most relevant errors detected and fixed during testing. Finally it summarises some of the most significant conclusions.     

航天器C51语言软件中断资源冲突分析方法

对航天器C51语言软件中常见的3种中断资源访问冲突情况进行了归纳总结.由目前软件资源冲突分析方法的比较结果,提出基于静态分析技术的C51语言软件资源访问冲突分析方法,并针对上述情况给出了具体分析流程.该方法可以解决多种C51语言软件中断资源访问冲突问题,也可以推广到其他处理器.     

基于LabVIEW的单光子探测器量子效率测控软件设计

介绍了利用相关光子法测量单光子探测器量子效率的原理和测量系统,开发了一套用于该系统的测控软件。软件采用LabVIEW的标准状态机结构,使用 VISA串口程序库、ActiveX控件和报表生成器,编写了激光器控制、符合光子测量、测试报告生成等分支程序,实现控制状态机分支的切换,和其他各项功能的调用。实际应用表明,该软件测控系统运行可靠、界面友好,满足单光子探测器量子效率测量的要求。