基于X射线脉冲星的深空探测器自主导航方案

X射线脉冲星自主导航系统可以为深空探测器提供位置、速度、时间和姿态等丰富且自主的导航信息,以X射线脉冲星测得的信息作为量测量,结合轨道动力学方程,对航天器的轨道进行自主估计确定。论文阐述了该方案的导航原理,在借鉴现有航天器导航系统的基础上,提出了基于X射线脉冲星导航的方案,介绍了方案的硬件组成、系统结构,并针对方案中导航敏感器多冗余的特征,给出了基于多传感器组合导航技术的结构,最后用仿真资料对方案做了性能概算和精度估计。     

月球与深空探测频率规划研究

介绍国际电（ITU）和空间频率协调组（SFGC）关于月球与深空探测频率使用的一些规定和建议,研究国外月球与深空探测频率使用规划和发展趋势,探讨我国月球与深空探测频率使用需求,提出我国月球与深空探测频率建议和发展方向。     

直流电弧等离子体炬数值模拟与诊断

直流电弧等离子体炬内部物理过程复杂且具动态性,较难对其进行准确描述与深入研究,且其工作温度较高,其状态参数难以使用常规方式测量。针对直流电弧等离子体炬,建立流动、传热和电磁相互耦合的数值模型,基于Fluent软件对直流电弧等离子体炬进行三维数值模拟和特性分析,设计并搭建了一套热焓探针实验系统,完成对直流电弧等离子体炬射流参数的测量分析。结果表明:建立的数值模型模拟结果与实验测量结果吻合较好,误差在10%以内;炬内温度与速度最大值与工作气流量呈正相关,均出现在靠近阴极区域,且沿轴线逐渐降低;等离子体炬内高温区与高电流密度区重合。     

月食对环月卫星运行影响及对策分析

从月食与环月卫星的关系出发,讨论了月食对卫星的影响机理。针对如何尽量缩短卫星进入地影时间的问题,给出了相位调整的概念和原理,同时介绍了卫星有效进影时间的概念,说明了相位调整方法的可行性。最后通过实例应用给出了相位调整的效果。文章所介绍的分析和控制方法对于环月卫星具有较广泛的适用性,可以在我国后续的月球探测任务中作为参考依据。     

期望状态序列导向的深空探测器规划修复方法

针对探测器动作持续、并行、消耗能源所导致的规划修复难求解问题,提出一种基于期望状态序列的深空探测器规划修复方法。该方法根据动作的执行完成情况,从既定规划中提取未完成执行动作的期望效果以及待执行动作的期望前提,构成一组有序的、逻辑与能源混合的期望状态集合,为规划修复提供子目标,从而将规划修复问题转化为状态转移路径搜索问题;并在搜索过程中,提出能源补给优先的规划修复策略,将逻辑修复与能源修复分离以降低问题求解难度,最终使得探测器能够自主从规划失败中恢复执行。最后,以火星环绕器为例进行数值仿真,验证了方法的有效性和合理性。     

绕月微卫星精确撞月轨道设计

为实现约束条件下的精准可控撞月,提出了基于Lambert问题的精确撞月轨道设计方法。通过求解Lambert问题,可得到撞月轨道轨控时刻的速度脉冲初值解,然后通过打靶法迭代得到撞月轨道的精确解。以"龙江二号"微卫星轨道为例,对撞月点经纬度的覆盖性,以及燃料约束下同一撞月点可行的轨控弧段进行全面分析。最后,通过月球南极水冰探测的撞月轨道设计案例,以验证本文提出的轨道设计方法的有效性。     

Air-LUSI: A robotic telescope design for lunar spectral measurements

This paper presents the mechanical design of a new robotic telescope that was designed and built to acquire lunar spectral measurements from the science pod of NASA's ER-2 aircraft while flying at an altitude of 70,000 feet (21.34 km). The robotic telescope used a double gimbal design that allowed for target tracking in azimuth and elevation. In addition to the challenging and restrictive geometry of the science pod, each component needed to be carefully selected to ensure that they could withstand the operating conditions at high altitude such as harsh temperatures extending as low as −54 °C and atmospheric pressure less than 1.05 psi (7.23 kPa). Due to the cold temperatures, low atmospheric pressure and the likely exposure to moisture, high strength industrial linear actuators were used to create an adjustable linkage system that controlled the pointing and tracking of the telescope. Although unconventional, this allowed for a robust design that outperformed the team's expectations by tracking the Moon for 40 min with an average tracking error under 0.05°. The results presented within this paper were acquired during a first set of engineering test flights, with further scientific missions to follow.     

研究两相流流动特性的测量系统

一种在气-液两相流或液相流中流动特性的测量系统,其结构简单、操作方便、实用性强;它可以自动地移动测量探针、进行多通道的数据采集和对实测数据进行实时处理;采样频率可达几十万赫兹; 这个系统适用于处理各种仪表输出的模拟或数字信号。本文描述了测量气泡速度、气泡大小、含气率、混匀时间和剪切应力等的电位探针和电化学技术。这个系统在许多实验中得到应用。     

单晶双斜探头探伤时缺陷定位问题的研究

当今社会对产品质量的检测要求越来越严格和全面了，在这种严格的检测下，各种专用的新型超声检测探头不断涌现，其中用于内燃机曲轴及石油钻铤等部位探伤的单晶双斜探头也得到了应用，但由于这种探头的特殊结构，以至它不易对缺陷定位，所在在这里，本文主要针对这种双斜探头的缺陷定位问题，进行探讨和研究。实验证明，所求计算公式达到了预期效果。     

Design and experimental performance verification of a thermal property test-bed for lunar drilling exploration

Chinese Chang'e lunar exploration project aims to collect and return subsurface lunar soil samples at a minimum penetration depth of 2 m in 2017. However, in contrast to those on the Earth, automated drilling and sampling missions on the Moon raise the risk of burning bits.Test-beds are required for testing the thermal properties of drill tools in a lunar environment. In this paper, a novel temperature measuring method based on thermocouples and a slip ring was proposed. Furthermore, a data acquisition system for a drilling process was designed. A vacuous,cryogenic, and anhydrous soil environment simulating the lunar surface was established. A drilling test-bed that can reach a depth of 2.2 m was developed. A control strategy based on online monitoring signals was proposed to improve the drilling performance. Vacuum and non-vacuum experiments were performed to test the temperature rising effect on drill tools. When compared with the non-vacuum experiment, the vacuum temperature rise resulted in a 12 °C increase. These experimental results provide significant support for Chinese lunar exploration missions.