三维数模随动下的机翼结构重量优化

目前,基于快速建模下的重量重心估算系统得到了快速发展。为了进一步提高结构重量估算精度,研究了如何在重量重心快速分析(WCGA)系统环境中构建优化模块。以机翼结构重量优化为例,提出优化流程,对优化模块功能进行分解,给出模型简化要求。以A320飞机机翼为例,对梁和长桁进行优化,结果显示,经过优化,有效减轻了结构重量,且相比于传统的减重优化设计方法,极大提高了计算效率。     

低成本多小天体并行交会技术

小天体资源开发方兴未艾,为降低开发风险和成本,需要发射无人探测器交会观测多个待选目标小天体。传统多目标探测方案存在无法多次交会、成本高,周期长等不足。提出的低成本多小天体并行交会技术,能够对多小天体探测任务进行解耦,实现基于微纳飞行器的低成本多目标并行交会勘查,从而降低探测成本,缩短探测周期。该技术结合行星借力与不变流形机制构建了低能量星际转移方案。然后引入扰动流形思想,使微纳飞行器能够实现与目标小天体的快速交会。进一步,提出了一种多目标小天体探测全局搜索方法,该方法基于在日地halo轨道上停泊的微纳飞行器集群,逐次确定小天体探测目标,并利用上述方法完成了多微纳飞行器与多小天体的交会。数值仿真结果表明,该方案能够大幅度降低转移过程的燃料消耗,并缩短转移时间。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Simulating planetary wave propagation to the upper atmosphere during stratospheric warming events at different mountain wave scenarios

Parameterization schemes of atmospheric normal modes (NMs) and orographic gravity waves (OGWs) have been implemented into the mechanistic Middle and Upper Atmosphere Model (MUAM) simulating atmospheric general circulation. Based on the 12-members ensemble of runs with the MUAM, a composite of the stratospheric warming (SW) has been constructed using the UK Met Office data as the lower boundary conditions. The simulation results show that OGW amplitudes increase at altitudes above 30 km in the Northern Hemisphere after the SW event. At altitudes of about 50 km, OGWs have largest amplitudes over North American and European mountain systems before and during the composite SW, and over Himalayas after the SW. Simulations demonstrate substantial (up to 50–70%) variations of amplitudes of stationary planetary waves (PWs) during and after the SW in the mesosphere-lower thermosphere of the Northern Hemisphere. Westward travelling NMs have amplitude maxima not only in the Northern, but also in the Southern Hemisphere, where these modes have waveguides in the middle and upper atmosphere. Simulated variations of PW and NM amplitudes correspond to changes in the mean zonal wind, EP-fluxes and wave refractive index at different phases of the composite SW events. Inclusion of the parameterization of OGW effects leads to decreases in amplitudes (up to 15%) of almost all SPWs before and after the SW event and their increase (up to 40–60%) after the SW in the stratosphere and mesosphere at middle and high northern latitudes. It is suggested that observed changes in NM amplitudes in the Southern Hemisphere during SW could be caused by divergence of increased southward EP-flux. This EP-flux increases due to OGW drag before SW and extends into the Southern Hemisphere.     

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

Energy requirements of a thermally processed ISRU radiation shield for a lunar habitat

The purpose of this study was to establish, on a first principles basis, the order of magnitude of energy requirements for a thermally processed, lunar regolith radiation shield constructed using an in-situ resource utilisation (ISRU) approach. This was done by developing a reference scenario habitat and using thermodynamic relationships and specific heat capacity expressions to determine the energy required to bring such a regolith volume up to sintering temperatures (c. 1,375 K). Once the energy requirements were developed some power system architectures were outlined conceptually and a nuclear power plant of c. 400 kW was suggested as a means to supply the necessary energy. This is well beyond current space nuclear applications. The study concludes that it is likely that the most efficient near-term solution is chemical processing of regolith, from an energy requirements perspective. The technology is also more mature and likely to be delivered on near term projects as it does not require such scaled-up power system architectures. Alternatively, bringing storm shelters up with the habitat to provide a means of weathering major solar events, and adding additional radiation protection to habitat quarters, possibly through a water blanket or similar mechanism, could provide a non-ISRU solution with current technology. However, in the longer term, the development of MW-scale power system architectures (fission, solar etc.), may permit a very large volume of material to be processed thermally for construction material, making a large, permanent human presence on the Moon more easily realisable.     

月球表层采样样品智能确认方法

表层采样是月球采样探测的重要方式，样品智能确认有助于提升工作效率与复杂问题处理能力。结合月球表层采样铲挖工作过程，分析了铲挖过程中臂载相机图像的特点，模仿有人参与识别过程，提出了层次解耦的月球样品智能识别流程，利用深度学习方法构建了一类深度卷积识别网络，完整地描述了图像、特征、标记在网络中的正反传递关系，并在月球表层采样地面试验中进行了验证，结果表明该方法对不同光照、不同背景、不同过程、不同形态的样品，具有较好的泛化识别能力，误识别率优于8.1%，平均单幅识别时间约0.7 s。     

从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

CHAMP卫星加速度计标校参数序列的谱分析

给出了利用能量守恒方法求定CHAMP卫星加速度计标校参数的基本原理和算法．对2001年8月-2003年12月共约两年半的CHAMP卫星加速度计数据进行了标校,导出了尺度、偏差和偏差漂移参数的时间序列,分别采用最小二乘谱分析和抗差谱分析对这些时间序列进行了分析．结果表明,尺度、偏差和偏差漂移参数都有明显的周期变化,但各主周期项略有差异．尺度的主周期是441d、220d、126d和13．4d的周期变化,其中220d和441d的周期变化的贡献相对较大．偏差中有明显的220d、126d和13．4d周期变化,各周期变化的贡献几乎相当;偏差漂移的主周期是220d、13．4d和9d的周期变化,其中13．4d的周期变化最为显著,几乎比其他周期项变化高出一个数量级．另外尺度和偏差参数还有明显的长期变化,而偏差漂移参数的长期变化不明显．     

地月空间星地双向单程测量高精度模型

针对使用星地双向单程测量技术实现给定场景下的地月空间高精度测量问题,建立了地月空间纳秒级星地时差解算模型与米级瞬时距离解算模型,定量分析了模型中各因素的量级,并对模型中收发时延、引力时延、定轨误差和大气延迟等多种因素引入的时差和距离估算误差进行了定量分析。仿真数据的处理结果校验了误差量级理论分析的准确性,时差估算的均方根误差优于7.6ns,瞬时距离估算均方根误差优于2.4 m。建立的模型可以对地月空间星地DOWR测量数据进行高精度处理,实现地月空间高精度时间比对,支持未来中国载人登月等任务及地月空间高精度导航技术。