国外木星系环绕飞行任务规划研究

调研了国外3项典型的木星系环绕任务(伽利略号、朱诺号和木星冰卫星探测器(JUICE)),归纳总结了行星借力飞行、利用天体摄动演化轨道、高精度导航、限制近木点高度以及利用飞越实现任务拓展等任务规划方法。最后,提出了我国木星系环绕探测任务规划的初步设想,即以木星和木卫二为主要探测目标,采用金星-地球-地球的地木转移借力序列,以及基于木卫二、木卫三和木卫四借力方式开展木星系探测任务规划,实现飞掠、环绕和穿透多种方式的木星系探测任务。     

一种相控阵雷达系统效能评估方法

文章从武器系统效能评估定义出发,建立了相控阵雷达系统评估的指标体系,并通过将群体决策引入AHP算法确立了各指标权重,采用云重心法对系统综合效能进行了分析,进而建立了完整的对相控阵雷达系统效能评估的方法,最后通过实例进行分析。     

基于天文和陆标观测的月球卫星自主导航方法

随着我国月球探测工程的开展,为弥补地面测控的局限性,月球卫星的自主导航技术已成为     

仿生毛细芯平板热管性能研究

为解决电子设备热管理问题,根据亲水性植物叶片表面微观凸起结构,以颗粒直径为75μm的电解铜粉为材料烧结制备了锥形毛细芯,制造了3种平板热管:普通蒸发段（No.1）、超亲水蒸发段（No.2）、超亲水蒸发段与超疏水冷凝段匹配（No.3）。以去离子水为工质,研究了加热功率、角度等因素对3种平板热管热性能的影响。结果表明:角度对3种平板热管的热性能影响不大,3种平板热管均具有较好的抗重力特性。超亲水蒸发段与超疏水冷凝段匹配的平板热管热性能最佳,当倾斜角为0°、加热功率为140.4W时,蒸发段中心点温度仅为67.0℃。超亲水蒸发段与超疏水冷凝段匹配的平板热管不仅具有最小蒸发热阻,最小值可达0.05K/W,而且具有最小冷凝热阻,最小值可达0.02K/W。      

重力空射稳定伞阻力特征自动化设计

为进行重力空射稳定伞的初步设计,文章以多体动力学软件(ADAMS)为二次开发平台,构建了重力空射箭-伞系统的动力学仿真模型;推导了火箭和稳定伞的气动模型,并利用动态链接子程序实现了气动力的加载;通过ADAMS命令语言建立了参数化模型和用户界面。在此基础上,自编可行方向优化算法实现了稳定伞阻力特征的自动化设计。最后,根据仿真计算结果对试验火箭出舱时间、安全通道、回收方式等问题进行了分析,为后续空射稳定伞的细节设计以及空射总体方案的确定提供了参考。     

首颗自主地月转移微卫星“龙江二号”

本文对世界首颗独立完成地月转移、近月制动、环月飞行的微卫星“龙江二号”进行了介绍。首先阐述了龙江二号的任务目标和总体方案;然后重点分析了轨道设计与控制、复杂电磁干扰的标定与抑制、宽视场三维基线干涉测量等关键技术难点;接着回顾了任务的实施过程;最后详细介绍了低频射电探测仪、沙特光学相机和VHF/UHF通信模块与学生微型CMOS相机等有效载荷,并展示了上述载荷获取的初步成果。     

An ion analyzer for the lunar surface with E-parallel–B

We present a novel instrument concept to measure the energy and mass spectra of ions incident on the lunar surface, based on the E-parallel–B or Thomson-parabola device used extensively as a diagnostic in the plasma fusion community. The Apollo-era Suprathermal Ion Detector Experiment (SIDE) was the first instrument package to perform in-situ measurements of ions incident on the lunar surface. The ions can originate from a variety of sources, including the solar wind, the Earth’s magnetotail, and photoionization of the thin lunar atmosphere. The species and energy distribution of ions arriving at the lunar surface depend in a complicated and poorly-understood fashion on the phase of the lunar day, the position of the Moon with respect to the Earth, and on the local plasma environment.     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.     

Performance of a small and low-cost chamber to simulate lunar surface environment

The performance of a small and low-cost metal chamber built to simulate the pressure and temperature conditions of lunar surface was assessed and the results are presented. This chamber is intended for studying the physical properties of lunar surface and subsurface (using soil simulants) and also to validate the technology readiness of certain newly developed payloads planned for future lunar surface missions (Lander/Rover). It is possible to reach down to ∼10⁻⁷ Pa under specific conditions and maintain the temperature of the sample under investigation to lunar day and night temperatures. The designed system has been subjected to various tests to evaluate its performance and suitability for carrying out experiments in a simulated lunar environment.     

风洞模型投放试验轻模型法重力效应影响

风洞模型投放试验是研究超声速机弹分离问题的一种有效手段，相似参数的选取是影响试验准度的关键因素。有初始弹射速度的超声速机弹分离研究中，通常采用"轻模型法"得到模型的运动学及动力学相似参数，但该相似参数中模型重力模拟不足。为了研究重力效应对投放试验结果的影响，采用CTS试验技术对全尺寸真实参数与缩比尺寸轻模型法相似参数条件下得到的结果进行了对比研究。研究结果表明：在载弹与载机分离过程中，载弹位姿相互耦合，垂直下落位移的快慢会影响载弹姿态角的变化；轻模型法相似参数条件下，载弹垂直下落位移较慢，虚拟重力的修正方法只能近似修正下落位移，不能对导弹姿态角进行修正，而姿态角会影响下落的位移；机弹分离安全性方面，轻模型法相似参数条件下的试验结果较真实参数偏危险。