新型无位置传感器开关磁阻电机的研究

提出了一种新型的基于测试线圈技术的无位置传感器方案.这种方案是通过测量导通相测试线圈的电感来获得实时转子位置的.文中对此进行了理论分析和实验验证,并成功地开发完成了一台无位置传感器开关磁阻电机原理样机.     

Experimental analysis of the breakage of a liquid bridge under microgravity conditions

The experimental results obtained in experiment “STACO” made on board the Spacelab D-2 are re-visited, with image-analysis tools not then available. The configuration consisted of a liquid bridge between two solid supporting discs. An expected breakage occurred during the experiment. The recorded images are analysed and the measured behaviour compared with the results of a three dimensional model of the liquid dynamics, obtaining a much better fit than with linear models.     

火箭橇体进水现象研究

在考核过载承受能力的火箭橇试验后,橇体内发现有水,从空气动力学的角度,对火箭橇体进水现象进行了初步分析,并利用FLUENT软件对进水原因进行了初步研究,通过分析,发现结构在穿越跨音速阶段时,由于内外压差的变化将导致内部或外部产生水汽。该发现为结构设计提供有益的建议。     

Satellite launch vehicle effect on the Earth’s lower ionosphere: A case study

The effect of the rocket exhaust products on the D-region of the ionosphere is investigated with the help of Very low frequency (VLF) electromagnetic wave propagation characteristics within the Earth-ionosphere waveguide. The changes in the electron density profile are computed from the observed VLF signal amplitude perturbations about 3 dB during the rocket launch. We find a localized electron depletion in the lower ionosphere at an altitude of around 58 km, that is thought to be originated by the attachment of ionospheric ion and molecular hydrogen along with water molecule in the exhaust product of first stage burn of Geosynchronous Launch Vehicle (GSLV) rocket at the time of GSLV launched from Sriharikota, India, on 27 August 2015 at 11:22 UT (16:52 IST). The ionospheric depletion perturbed the navigational VLF signal (VTX = 17 kHz) 134 s after the launch of the GSLV rocket.     

Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.     

水下超声速射流对上浮水雷受力特性影响研究

固体火箭发动机具有功率密度大、推力大等优势,常被用于上浮水雷的推进器。然而发动机在水下工作时燃气射流使流场压力发生剧烈脉动,进而影响发动机的推力性能及上浮水雷的受力特性。基于VOF多相流模型和理想气体模型,建立了上浮水雷在不同工作状态(欠膨胀、完全膨胀、过膨胀)下的数值模型,研究了水下燃气喷射流对上浮水雷的受力特性影响。结果显示,欠膨胀工况时,发动机推力平缓,大小为12.2KN,上浮水雷受力未出现负值;完全膨胀时,射流发生颈缩、胀鼓现象位置距离雷体较远,导致发动机推力及水雷壳体受力振荡不剧烈;过膨胀工况时,射流发生颈缩、胀鼓现象距离喷管较近,发动机推力发生剧烈脉动,产生21.37%的振荡幅度,胀鼓现象发生时,流场压力显著降低使得上浮水雷后体受力减小,壳体阻力增大,上浮水雷最大产生27KN的负推力。     

基于自适应网格的超声速液体射流破碎过程研究

为研究超声速气流中液体横向射流的破碎过程,采用脉冲背景光方法和VOF方法开展了实验和数值研究。为提高液体横向射流中气液界面和气流场特征捕捉的精确性,采用自适应网格技术对于气液界面、激波出现位置进行网格细化,计算得到了较为精细的气液界面、激波特征及涡系结构。研究结果表明:在低成本仿真模拟条件下,利用自适应网格计算得到的射流轨迹和轮廓与实验吻合较好,射流轨迹的最大误差为10%;射流初始段在超声速气流条件下,仍然存在一段高度约为1.9倍喷孔直径且圆柱形态保持较好的连续光滑液柱。随着喷注压降的升高,液柱的长度逐渐增大;主流气体流经液柱发生三维绕流,在射流附近和近壁面区域形成不断演化的反转涡对,反转涡对的形成加速了液体射流一次破碎过程。     

基于综合模糊聚类算法的液体火箭发动机故障诊断

基于液体火箭发动机正常及故障状况数据的完备程度和数据质量的不断提高,提出一种基于数据驱动的综合模糊聚类算法用于故障诊断。采用模糊c均值(FCM)算法对已知正常样本数据进行聚类得到最优的聚类中心,将所得到的聚类中心作为先验样本数据用于传递闭包法最优分类结果的选择从而得到故障检测结果,该算法只需要少量的正常先验样本数据就能快速、准确的检测出故障;随后采用FCM算法进行故障分类,可以根据现有的故障数据库进行聚类得到对应的故障类型,并且可以给出故障幅值范围。模型仿真结果表明:该算法对故障的检测率可达968%,故障隔离率达到94%。某型液体火箭发动机实际试车数据结果表明:该故障诊断算法能够准确及时的检测并隔离出故障。     

双脉冲固体火箭发动机隔舱打开与破片运动过程模拟

相比传统固体火箭发动机,具有能量管理特性的双脉冲固体火箭发动机结构更为复杂,为了提高其工作可靠性,针对核心部件金属隔舱的破片运动过程开展了数值仿真与试验研究。首先基于LS-DYNA软件,分析中引入监测函数、逻辑开关函数和加载驱动函数,模拟燃气流对破片的连续作用力,计算得到了在不同时刻破片的空间分布规律、撞击点位置及发动机内部损伤情况,保证了破片运动过程的高保真还原。其次,为了验证仿真结果的准确性,进行了模拟二脉冲初始工况的热流试验,发现破片撞击位置及损伤程度的仿真结果与试验数据一致性较高,其中撞击位置的预示误差小于9%,试验结果充分验证了有限元模型的准确性。由此,建立了适用于双脉冲固体火箭发动机金属隔舱破片运动过程的分析模型,实现了破片撞击位置及损伤程度的高精度预示。     

潜入式喷管喉衬界面间隙优化设计

为了解决固体火箭发动机潜入式喷管喉衬在热载荷与内压联合作用下界面间隙优化问题,数值模拟方法求解了喷管热结构响应.采用流体仿真软件,计算了潜入式喷管流动过程的稳态流场,获取了高温燃气流动参数与固体壁面对流换热系数.并采用三维有限元结构计算平台,编写了非均布壁面压力载荷与非均布对流换热系数子程序,求解了喉衬前后搭接界面间隙...