Transient simulation of a differential piston warm gas self-pressurization system for liquid attitude and divert propulsion system

In order to obtain the dynamic characteristics of a differential piston warm gas selfpressurization system for liquid attitude and divert propulsion system, a transient model is developed using the modular modeling method. The system includes the solid start cartridge,pressure-amplified tank with liquid monopropellant, liquid regulator, gas generator, and pipes.The one-dimensional finite-element state-variable model is applied to the pipes and the lumped parameter method is adopted for the other modules. The variations of the system operation parameters over time during the startup, steady-state, and pulsing operational processes are obtained from the transient model, and the characteristics of starting time changing with different system parameters are also analyzed. It is shown that the system startup process can be divided into three distinct processes. The starting time monotonically changes with variations of the liquid regulator parameters, first decreasing and then increasing with the mass change of the solid propellant charge of the start cartridge, initial gas cavity volume of the pressure amplified tank and initial gas cushion of the propellant tank. The starting time can be reduced to less than 1.0 s(0.68–0.75 s for the current system). For meeting the deviation requirements of ±10% of the steady-state propellant tank pressure, the positive deviation requirement is assured by the self-locking pressure and the negative deviation can be assured within an allowable maximum propellant tank volume flowrate(1.6 times the design value for the proposed system) for downstream thrusters for a designed system. The results from the simulation are useful as a guide for further system design and testing.     

某型直升机旋翼转速表的数字化设计方案

提出某型直升机数字旋翼转速表的研制方案,给出以频率/数字(F/D)变换电路为核心的主要硬件原理,分析了采样误差的产生及抑制误差的措施.装机部件研制成功证实了方案的可行性.     

直升机桨叶耐颗粒物/砂磨蚀标准分析

在分析研究直升机桨叶耐颗粒物/砂磨蚀标准主要技术要素的基础上,全面对比分析了MIL-STD-3033、ГОСТР52560-2006、GJB 1171-1991等国内外标准的基本内容,提出了装备研制及标准化工作相关建议。     

Plasmaspheric electron content derived from GPS TEC and FORMOSAT-3/COSMIC measurements: Solar minimum condition

The plasmaspheric electron content (PEC) was estimated by comparison of GPS TEC observations and FORMOSAT-3/COSMIC radio occultation measurements at the extended solar minimum of cycle 23/24. Results are retrieved for different seasons (equinoxes and solstices) of the year 2009. COSMIC-derived electron density profiles were integrated up to the height of 700 km in order to retrieve estimates of ionospheric electron content (IEC). Global maps of monthly median values of COSMIC IEC were constructed by use of spherical harmonics expansion. The comparison between two independent measurements was performed by analysis of the global distribution of electron content estimates, as well as by selection specific points corresponded to mid-latitudes of Northern America, Europe, Asia and the Southern Hemisphere. The analysis found that both kinds of observations show rather similar diurnal behavior during all seasons, certainly with GPS TEC estimates larger than corresponded COSMIC IEC values. It was shown that during daytime both GPS TEC and COSMIC IEC values were generally lower at winter than in summer solstice practically over all specific points. The estimates of PEC (h > 700 km) were obtained as a difference between GPS TEC and COSMIC IEC values. Results of comparative study revealed that for mid-latitudinal points PEC estimates varied weakly with the time of a day and reached the value of several TECU for the condition of solar minimum. Percentage contribution of PEC to GPS TEC indicated the clear dependence from the time with maximal values (more than 50–60%) during night-time and lesser values (25–45%) during day-time.     

Synergistic use of multitemporal RAMP,ICESat and GPS to construct an accurate DEM of the Larsemann Hills region,Antarctica

An enhanced digital elevation model (DEM) of the Larsemann Hills region, east Antarctica, is constructed synergistically by using highly accurate ground-based GPS measurements, satellite-derived laser altimetry (GLAS/ICESat) and Radarsat Antarctic Mapping Project (RAMPv2) DEM-based point elevation dataset. Our DEM has a vertical accuracy of about 1.5 times better than RAMPv2 DEM and seven times better than GLAS/ICESAT-based DEM. The accuracy is improved by validating the RAMPv2 DEM elevation by supplementing with GLAS/ICESat and DGPS survey data, when compared to that of DEM constructed by using GLAS/ICESat or RAMPv2 alone. With the use of accurate GPS data as ground control points reference elevations, the DEM extracted is much more accurate with least mean RMSE of 34.5 m than that constructed by using a combination of GLAS/ICESat and RAMPv2 as true reference. The newly constructed DEM 7 achieves highest accuracy with the least average elevation difference of 0.27 m calculated using 46 ground reference points. Available DEMs of Antarctic region generated by using radar altimetry and the Antarctic Digital Database indicate elevation variations in the range of 50–100 m, which necessitates the generation of local DEM and its validation by using ground truth. This is our first attempt of fusing multi-temporal, multi-sensor and multi-source elevation data to generate a DEM of any part of Antarctica, in order to address the ice elevation change to infer the ice mass balance. Our approach focuses on the strengths of each elevation data source to produce an accurate DEM.     

空投舱体着陆冲击仿真与分析

针对空投物资方式中物资的安全着陆问题,采用舱体结构对空投救生装备进行缓冲保护.本文在对舱体空投问题进行了力学分析的基础上,采用显式非线性动力学分析有限元软件ANSYS/LS-DYNA对空投舱体着陆冲击进行模拟计算,根据仿真计算所得的舱体在冲击过程中的动态响应,来确定舱体结构设计方案的可行性,体现了设计的先进性.     

舰载无人机横侧向着舰控制律设计

舰载无人机横侧向控制一直是着舰控制律设计的难点。为了解决着舰横侧向控制的难题,针对舰载无人机的非线性模型采用了反演控制器设计方法,为解决传统反演的计算膨胀问题,引入了指令滤波方法,同时只设计了一个Lyapunov函数证明了稳定性;由于舰载机动力学模型不能精确获得,采用了自适应方法对其进行估计。设计的横侧向着舰控制器,能较好地解决横侧向控制器设计过程中的耦合问题,并且和传统PID进行了仿真对比,证明了所设计的控制律满足了对参考信号跟踪的性能要求。     

白炽灯色温测量装置电路设计

介绍利用单片单板机接口电路完成对６Ｖ、３０Ｗ白炽灯光源与其对应的标准白炽灯光源的色温比对标定工作。     

液冷模块的热仿真分析

运用基于CFD的热仿真软件Flotherm对液冷模块进行了热仿真分析,分别研究了在不同环境温度,不同冷却液流量以及不同冷却液温度条件下,液冷模块内部温度场的变化规律。仿真分析结果表明,环境温度对液冷模块的温度场影响非常小;液冷模块冷却液流量的增幅与元器件温度的降幅并非正比关系;元器件温度的升幅与冷却液温度的增幅相同。     

高压液氧供应系统管路设计

高压液氧供应系统是我国压力最高的挤压式液体火箭发动机试验台的关键分系统。在系统设计过程中，通过合理布置管路，设计专用固定支架，采用自然补偿和堆积绝热技术，解决了高压低温推进剂系统管路设计中的难题。该系统顺利通过气密性检查和调试，经多次热试车考核，系统稳定可靠，满足设计要求。