直线插补在回转类零件周向槽铣削中的应用

利用旋转第四轴、宏程序指令编程和G01直线插补编程,提出了实现某些回转类零件外周曲面上的规则槽、螺旋槽、异形槽以及各种凸轮的加工方法。用凸轮加工实例对提出的加工方法进行仿真验证,获得了较好的加工精度,证明了此方法正确可行。     

服务型制造模式下民机企业价值网络研究

基于航空制造行业背景,对服务型制造模式下民机企业价值网络展开探讨。首先分析服务型制造模式的价值源泉,重点讨论其价值共创机制,引出了价值共创的条件——价值网络;其次,分析服务型制造企业由价值链向价值网络管理的转变过程,提出服务型制造价值网络概念,并总结出服务型制造企业的价值网络特性及本质;最后,以航空制造业为例,分析其价...     

单轴拉伸和压缩镁合金各滑移系的Schmid因子计算

针对单轴拉伸和压缩条件下的镁合金,计算了不同滑移系（基面滑移、柱面滑移、锥面滑移、锥面滑移）在整个取向空间中的Schmid因子分布.计算结果表明,基面滑移、柱面滑移和锥面滑移系的Schmid因子在取向空间中都有0.5的极大值;而锥面滑移系的Schmid因子普遍较低,当θ在80°左右,ψ在70°左右时的最大值仅为0.383.计算结果为镁合金变形机制的分析提供基础.     

New concepts for the avoidance or utilisation of methane in life support systems

Due to high resupply costs, especially for long-duration stays in space habitats beyond low earth orbit, future manned space missions will require life support systems (LSS) with a high degree of regenerativity. Possible ways to overcome the waste of resources and to save on resupply mass are therefore of major interest for the development of next generation environmental control and life support systems.     

Model-based robust estimation and fault detection for MEMS-INS/GPS integrated navigation systems

In micro-electro-mechanical system based inertial navigation system（MEMS-INS）/global position system（GPS） integrated navigation systems, there exist unknown disturbances and abnormal measurements. In order to obtain high estimation accuracy and enhance detection sensitivity to faults in measurements, this paper deals with the problem of model-based robust estimation（RE） and fault detection（FD）. A filter gain matrix and a post-filter are designed to obtain a RE and FD algorithm with current measurements, which is different from most of the existing priori filters using measurements in one-step delay. With the designed filter gain matrix, the H-infinity norm of the transfer function from noise inputs to estimation error outputs is limited within a certain range; with the designed post-filter, the residual signal is robust to disturbances but sensitive to faults. Therefore, the algorithm can guarantee small estimation errors in the presence of disturbances and have high sensitivity to faults. The proposed method is evaluated in an integrated navigation system, and the simulation results show that it is more effective in position estimation and fault signal detection than priori RE and FD algorithms.     

Active flutter suppression of a multiple-actuated-wing wind tunnel model

In this study, a multi-input/multi-output（MIMO） time-delay feedback controller is designed to actively suppress the flutter instability of a multiple-actuated-wing（MAW） wind tunnel model in the low subsonic flow regime. The unsteady aerodynamic forces of the MAW model are computed based on the doublet-lattice method（DLM）. As the first attempt, the conventional linear quadratic-Gaussian（LQG） controller is designed to actively suppress the flutter of the MAW model. However, because of the time delay in the control loop, the wind tunnel tests illustrate that the LQG-controlled MAW model has no guaranteed stability margins. To compensate the time delay, hence, a time-delay filter, approximated via the first-order Pade approximation, is added to the LQG controller. Based on the time-delay feedback controller, a new digital control system is constructed by using a fixed-point and embedded digital signal processor（DSP） of high performance. Then, a number of wind tunnel tests are implemented based on the digital control system.The experimental results show that the present time-delay feedback controller can expand the flutter boundary of the MAW model and suppress the flutter instability of the open-loop aeroelastic system effectively.     

不确定多变量线性系统的快速收敛Terminal滑模控制

针对一类不确定多变量线性系统,提出一种对数型快速Terminal滑模变结构控制方案,设计了对数型非线性Terminal滑模超曲面及其相应的变结构控制律.研究结果表明:系统状态在有限时间内收敛至Teminal 滑模面上,随后系统保持在滑模面上并在有限时间内收敛到平衡点.与普通快速Terminal滑模相比,在滑模面上能以更...     

多渐消因子Kalman滤波器在SINS初始对准中的应用(英文)

针对系统模型和统计信息不能精确已知的条件下Kalman滤波无法给出最优解这一问题,单一渐消因子Kalman滤波算法对于简单的系统是有效的,但是对于复杂的多变量系统,仅仅利用单个的渐消因子是不够的。本文提出了一种多渐消因子滤波算法,通过利用开窗法计算新息序列协方差的无偏估计获得渐消因子矩阵。利用渐消因子矩阵调节一步预测均方误差矩阵k|k1P,对不同的滤波通道提供不同的渐消速率。将该方法应用于SINS的初始对准中,仿真和试验结果表明:当真实系统噪声统计特性同设定参数不一致时,对准精度明显高于其他滤波算法。其对不确定性噪声具有较低的敏感度,对系统参数具有较好的滤波效果。因而,在实际应用中具有重要的参考价值。     

Improved local amplification factor transport equation for stationary crossflow instability in subsonic and transonic flows

Transition prediction is a hot research topic of fluid mechanics. For subsonic and transonic aerodynamic flows, e^N method based on Linear Stability Theory (LST) is usually adopted reliably to predict transition. In 2013, Coder and Maughmer established a transport equation for Tollmien-Schlichting (T-S) instability so that the e^N method can be applied to general Reynolds-Average-Navier-Stokes (RANS) solvers conveniently. However, this equation focuses on T-S instability, and is invalid for crossflow instability induced transition which plays a crucial role in flow instability of three-dimensional boundary layers. Subsequently, a transport equation for crossflow instability was developed in 2016, which is restricted to wing-like geometries. Then, in 2019, this model was extended to arbitrarily shaped geometries based on local variables. However, there are too many tedious functions and parameters in this version, and it can only be used for incompressible flows. Hence, in this paper, after a large amount of LST analyses and parameter optimization, an improved version for subsonic and transonic boundary layers is built. The present improved model is more robust and more concise, and it can be applied widely in aeronautical flows, which has great engineering application value and significance. An extensive validation study for this improved transition model will be performed.     

用双线阵CCD实现高准确度微孔自动测量

介绍了一种使用线阵CCD自动测量微小圆孔参数的方法。基于微小圆孔的夫琅和费衍射原理 ,使用正交线阵CCD实现了对微孔的直径和圆度误差的二维参数的自动测量。