基于HOSVD局部重组的利噪抑噪经验模式分解及应用

及时准确地识别航天机构萌生和发展的损伤故障特征信息,可为机构故障诊断评估、科学任务调整以及未来在轨维修提供科学决策依据。集成噪声重构经验模式分解(ENEMD)及其衍生方法都是基于噪声利用机制以原信号中估计噪声改善模式混淆并实现信号降噪。然而,该方法中奇异值拐点难以获取、阈值处理中噪声不连续等带来的噪声估计偏差,将降低微弱特征提取准确性。为此,提出一种基于高阶奇异值分解(HOSVD)局部重组的噪声估计技术。研究基于滑动窗截断和Hankel矩阵相结合的张量构建,然后将奇异值曲率谱上的最大峰值点作为合理奇异阶,最后根据选取的奇异阶重构张量分解模型得到所需的估计噪声分量。在此基础上,将HOSVD局部重组引入ENEMD方法中,提出利噪抑噪经验模式分解方法。该方法可进一步提高微弱噪声估计精确度,实现对航天机构损伤微弱特征的增强提取。仿真分析和某航天轴承试验案例验证了该方法在损伤微弱特征提取和识别上具有实用性与有效性。     

Unstable unsteady aerodynamic modeling based on least squares support vector machines with general excitation

Common, unsteady aerodynamic modeling methods usually use wind tunnel test data from forced vibration tests to predict stable hysteresis loop. However, these methods ignore the initial unstable process of entering the hysteresis loop that exists in the actual maneuvering process of the aircraft. Here, an excitation input suitable for nonlinear system identification is introduced to model unsteady aerodynamic forces with any motion in the amplitude and frequency ranges based on the Least Squares Support Vector Machines (LS-SVMs). In the selection of the input form, avoiding the use of reduced frequency as a parameter makes the model more universal. After model training is completed, the method is applied to predict the lift coefficient, drag coefficient and pitching moment coefficient of the RAE2822 airfoil, in sine and sweep motions under the conditions of plunging and pitching at Mach number 0.8. The predicted results of the initial unstable process and the final stable process are in close agreement with the Computational Fluid Dynamics (CFD) data, demonstrating the feasibility of the model for nonlinear unsteady aerodynamics modeling and the effectiveness of the input design approach.     

State and disturbance estimation for test masses of drag-free satellites based on self-recurrent wavelet neural network

In recent years, the drag-free satellites have been widely used for some fundamental physical experiments, such as checking short-range effects of general relativity, geopotential determination and the exploration of static ocean current. And the space-borne detector of gravitational waves is one of the important applications for drag-free satellites in the future. In this study, the estimation of relative motion state and disturbance for test masses of drag-free satellite after release are researched. Firstly, the relative motion model between the test masses is established based on corresponding reference frames. Secondly, a self-recurrent wavelet neural network estimator is designed to estimate the pure gravitational relative motion state and disturbance for the test masses, and the sliding mode controller is used to transfer the relative motion state to the ideal state. Finally, the proposed estimation methods are verified by the simulation results.     

Modeling spatial density in low earth orbits using wavelets and random search

The events that occurred after 2007 such as Chinese anti-satellite test, explosion of Briz-M upper stage, break up of cosmos-2421 and collision of cosmos-2251 with Iridium-33 satellites have completely changed the spatial density patterns in low earth orbits. This has increased the risk of collision between active satellites and debris created by them. Aftermath, the risk assessment of possible collisions called as conjunction analysis of working satellites from day to day has become more crucial. Spatial density models are useful in understanding the long-term likelihood of a collision in a particular region of space and helpful in pre-launch orbit planning. In this paper we present an algorithmic procedure for automatically estimating exact model parameters corresponding to the peak location and number of peaks using wavelets that will speed up the parameter estimation process for the models with peaks.     

深空探测航天器巡航段自主导航方法研究

对深空探测航天器自主导航方法进行了研究。为了应对深空探测中航天器轨道动力学模型的误差，在分光计测量航天器相对于太阳径向速度基础上，引入了小行星的视线矢量测量。通过最小二乘法计算出由小行星视线矢量所得到的位置信息，采用改进的信息融合方法修正扩展卡尔曼滤波中不精确的动力学模型造成的状态估计误差。同时计算了模型的能观度，对模型的可观性进行了分析。最后对算法进行了仿真分析，仿真结果表明，该算法对动力学模型的依赖性明显低于其他算法，在相同模型精度下，可获得更好的滤波精度。     

Extrinsic calibration of a laser displacement sensor in a non-contact coordinate measuring machine

In order to implement 3D scanning of those complicated parts such as blades in the aviation field,a non-contact optical measuring system is established in the paper,which integrates a laser displacement sensor,a probe head,the frame of a coordinate measuring machine (CMM),etc.As the output of the laser sensor directly obtained possesses the 1D length of the laser beam,it needs to determine the unit direction vector of the laser beam denoted as (l,m,n) by calibration so as to convert the 1D values into 3D coordinates of target points.Therefore,an extrinsic calibration method based on a standard sphere is proposed to accomplish this task in the paper.During the calibration procedure,the laser sensor moves along with the motion of the CMM and gathers the required data on the spherical surface.Then,both the output of the laser sensor and the grating readings of the CMM are substituted into the constraint equation of the spherical surface,in which an over-determined nonlinear equation group containing unknown parameters is established.For the purpose of solving the equation group,a method based on non-linear least squares optimization is put forward.Finally,the system after calibration is utilized to measure the diameter of a metallic sphere 10 times from different orientations to verify the calibration accuracy.In the experiment,the errors between the measured results and the true values are all smaller than 0.03 mm,which manifests the validity and practicality of the extrinsic calibration method presented in the paper.     

最佳平方逼近的异步时钟恢复插值滤波器设计

给出了一种异步时钟恢复的最佳平方逼近插值滤波器设计，该滤波器基于最小平方逼近理论，采用易于硬件实现的Farrow结构；克服了拉格朗日插值滤波器参数固定而窗函数截短插值滤波器结构复杂的问题。对我国航天测控设备的数字化和小型化具有较好的应用价值。     

FrFT-CSWSF:Estimating cross-range velocities of ground moving targets using multistatic synthetic aperture radar

Estimating cross-range velocity is a challenging task for space-borne synthetic aperture radar（SAR）, which is important for ground moving target indication（GMTI）. Because the velocity of a target is very small compared with that of the satellite, it is difficult to correctly estimate it using a conventional monostatic platform algorithm. To overcome this problem, a novel method employing multistatic SAR is presented in this letter. The proposed hybrid method, which is based on an extended space-time model（ESTIM） of the azimuth signal, has two steps： first, a set of finite impulse response（FIR） filter banks based on a fractional Fourier transform（FrFT） is used to separate multiple targets within a range gate; second, a cross-correlation spectrum weighted subspace fitting（CSWSF） algorithm is applied to each of the separated signals in order to estimate their respective parameters. As verified through computer simulation with the constellations of Cartwheel, Pendulum and Helix, this proposed time-frequency-subspace method effectively improves the estimation precision of the cross-range velocities of multiple targets.     

Model-based robust estimation and fault detection for MEMS-INS/GPS integrated navigation systems

In micro-electro-mechanical system based inertial navigation system（MEMS-INS）/global position system（GPS） integrated navigation systems, there exist unknown disturbances and abnormal measurements. In order to obtain high estimation accuracy and enhance detection sensitivity to faults in measurements, this paper deals with the problem of model-based robust estimation（RE） and fault detection（FD）. A filter gain matrix and a post-filter are designed to obtain a RE and FD algorithm with current measurements, which is different from most of the existing priori filters using measurements in one-step delay. With the designed filter gain matrix, the H-infinity norm of the transfer function from noise inputs to estimation error outputs is limited within a certain range; with the designed post-filter, the residual signal is robust to disturbances but sensitive to faults. Therefore, the algorithm can guarantee small estimation errors in the presence of disturbances and have high sensitivity to faults. The proposed method is evaluated in an integrated navigation system, and the simulation results show that it is more effective in position estimation and fault signal detection than priori RE and FD algorithms.     

装备研制费用参数估算方法研究

参数法是进行装备研制费用估算的有效方法之一.介绍了参数费用估算的历史和基本原理,分析了装备研制费用的主要驱动因素,将其作为估算参数,并给出了装备研制费用参数估算的基本流程.最后,基于国际先进的参数估算软件True Planning,对国外新一代直升机进行了参数估算的实例研究,显示了参数估算的有效性.