A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

在企业深化改革中开创社会化计量测试新局面

通过大量的事实，阐述了在企业不断深化改革过程中，开创社会化计量测试的基础，条件及基本做法。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

公差原则中相关要求的计算问题

关于公差原则中的相关要求的计算问题 ,本文提出了两种方法 :计算法和图解法。运用这两种方法可以简化此类问题的计算过程 ,准确求得计算结果。     

浮动零点法及其在声表面波（SAW）传感器中的应用

温度是影响传感器精度的重要因素。本文介绍了一种新的温度误差校正方法，即浮动零点法。该方法以差动原理和浮动坐标为基础，是实现温度校正较为理想的方法。     

多尺度子域基函数矩量法解的稳定性与迭代法

通过对几个具体实例的计算，证实了在电磁场边值问题的矩量法求解过程中，选用不同的基函数其解的数值稳定性会有很大的差别。从而有可能选择一种数值稳定性比较好的基函数来进行矩量法求解。另一方面，提出了选用多尺度子域基函数，并通过多次迭代来提高矩量法解的精度的算法。实例计算表明，该算法不仅可以有效地降低系数矩阵的条件数，而且还降低了对计算机内存容量的要求，是一种有效的、稳定的算法     

一种飞船返回舱落点选优算法的设计与实现

设计一种选优算法。算法依据概率论,以寻找落点最密集区域为思路,从已知众多飞船返回舱落点数据中计算产生一个“优秀”落点,即尽可能接近返回舱的实际着陆点。     

A novel framework for liquid propellant engine’s cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

One of the challenges of combustion chamber and nozzle design in a Liquid Propellant Engine (LPE) is to predict the behavior and performance of the cooling system. Therefore, while designing, the optimization of the cooling system is always of great importance. This paper presents the multi-objective optimization of the LPE’s cooling system. To this end, a novel framework has been developed, resulting from the application of the Response Surface Method (RSM) and the correlation coefficients matrix, sensitivity analysis and the The Particle Swarm Optimization (PSO). based on this method, the input variables, constraints, objective functions, and their surfaces were identified. In terms of multi-optimization algorithms, RSM and PSO are utilized to get global optimum. In conclusion, the methodology capability is to optimize the LPE’s cooling system, 6 percentage increase in total heat transfer and 7 bar decrease cooling system pressure loss, which resulted in a 1.2-seconds increase in the specific impulse of the engine.     

国土卫星图象的校正方法

自国土普查卫星发射成功以来,针对国土星成象的几何特性,先后研制了一系列针对不同成象条件和地表状况的几何校正方法。文章的目的,就是对这些方法,从客观的角度,进行评述。找出存在的问题,并指出解决这些问题的方法。     

控制飞行器磁特性的方法

由于飞行器结构和功能的需要,任何飞行器都会有一定的磁性。飞行器的磁性会干扰飞行器的姿态和影响磁敏感仪器的性能,因此在飞行器的设计和研制过程中,必须控制飞行器的磁特性。本文简单的介绍了空间环境磁场和飞行器的磁源,着重阐述了控制飞行器磁性的设计原则和试验方法。