Soil moisture estimation by using multipolarization SAR image

In the past studies, different soil moisture estimation models were developed for bare soil areas by using remotely-sensed data. However, there are few models that can be used to estimate soil moisture in vegetated areas. Water Cloud Model (WCM) model is a widely used soil moisture estimation model has been developed for vegetated areas. In this study, the WCM model was extended to take soil roughness parameter into consideration. The modeling and its accuracy assessment were done by using multi-polarization Airborne Synthetic Aperture Radar (AIRSAR) images and ground data collected during field Soil Moisture Experiments.     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

基于非线性变换的加速度计误差标定与补偿CSCD

为提高三轴加速度计测量精度,分析其误差来源和产生机理,建立了误差模型;根据误差模型和重力场幅值不变特性,推导出非线性观测方程。引入两个未知的参数向量,通过数学变换把非线性观测方程变形为关于新未知参数的线性方程;然后采用批量最小二乘法求出新的未知参数,并根据误差模型参数和新未知参数之间的关系,利用逆解析运算求出对应的零点偏差、灵敏度误差和三轴不正交误差。实验结果表明,加速度计正负误差峰值间距可以减小100倍左右,精度可达10-3m/s2,并具有很好的可重复性。该方法算法效率较高,补偿效果显著。     

观测数据野值剔除的TBS-LS逼近方法

提出了以最小二乘逼近方法为基础的数据野值判别与剔除算法。利用TBS（三角B样条）曲线同时具有局部性和整体性的优越性构造最小二乘拟合算法,并结合偏度分析与残量分析误差方法,在给定范数意义下的评价系统中,可以得到TBS-LS（最小二乘三角B样条）拟合曲线,从而可以更好地识别并剔除野值。最后给出算法以及主要结果,通过实例说明方法的有效性。     

基于Kohonen网络的动目标实时定位融合算法

为完成对动目标的实时定位测量,有效减小测控装备组网测量实时跟踪定位误差,在建立多定位子系统组网混合式融合结构模型的基础上,利用Kohonen网络的自组织特征映射模型特点,确定各组交会数据的权值,并将其输入1个Kohonen网络进行在线竞争、融合求得目标的位置信息,增强了目标实时位置信息的连续性、完整性,减小了实时定位误差。     

推进剂供应管道的集中参数近似模型研究——模态近似模型

提出了用模态近似法建立分布参数湍流管道的集中参数近似模型的新方法,发展了适用于水力和绝热气体湍流管道的两种模态近似模型：Ｉ－Ｒ－Ｃ模态和等效层流模型。模型中考虑了频率相关摩擦损失。利用单根管道阀门关断问题的仿真计算对本文的模型进行了验证,计算结果与考虑频率相关摩擦损失的特征线方法的计算结果十分吻合。     

基于响应面法的机翼气动/结构一体化优化设计研究

基于响应面法进行了机翼气动/结构一体化优化设计研究,流动控制方程为三维欧拉方程,采用有限体积法进行数值求解,应力和结构变形采用有限元方法计算,静气动弹性分析采用强耦合迭代方式,响应面模型采用二次多项式来构造。以跨音速M6机翼为初始机翼,进行了多目标、多约束情形下的气动/结构综合优化设计,优化后所得到的新机翼具有更佳的气动/结构综合性能,升阻比增加了9.25%,而重量减轻了4.84%;响应面模型精度满足设计要求,拟合误差均不超过1%;这说明本文所发展气动/结构综合优化设计方法是成功且有效的,具有广泛的应用前景。     

An adaptive turbo-shaft engine modeling method based on PS and MRR-LSSVR algorithms

In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection (PS) algorithm and multi-input multi-output recursive reduced least square support vector regression (MRR-LSSVR) machine is proposed. Firstly, the PS algorithm is designed to choose the most reasonable inputs of the adaptive module. During this process, a wrapper criterion based on least square support vector regression (LSSVR) machine is adopted, which can not only reduce computational complexity but also enhance generalization performance. Secondly, with the input variables determined by the PS algorithm, a mapping model of engine parameter estimation is trained off-line using MRR-LSSVR, which has a satisfying accuracy within 5&. Finally, based on a numerical simulation platform of an integrated helicopter/ turbo-shaft engine system, an adaptive turbo-shaft engine model is developed and tested in a certain flight envelope. Under the condition of single or multiple engine components being degraded, many simulation experiments are carried out, and the simulation results show the effectiveness and validity of the proposed adaptive modeling method.     

某型民用运输机主起落架连接区结构静力试验

飞机静力试验是飞机试验的重要内容之一,是验证飞机结构强度和静力分析正确性的重要手段。为验证某型民用运输机主起落架连接区结构满足静强度要求,以及有限元计算分析的正确性,在静力试验飞机上进行了主起落架连接区结构静力试验。通过全机有限元模型和细节有限元模型分析计算,进行加载、应力\应变、位移试验数据与有限元计算值的分析对比,计算值与试验数据符合较好。