利用地磁场给飞轮卸载的新方法

通过对圆轨道地磁场强度的变化规律分析 ,将卫星磁力矩器产生的磁矩按傅立叶级数展开 ,根据卫星所需卸载角动量大小 ,按照最优控制理论求出三轴磁矩取值 ,得出飞轮卸载控制律。最后文章给出飞轮卸载稳定性分析和仿真结果 ,表明这种飞轮卸载方法简单而且省能量。     

双时间步长加权ENO-强紧致高分辨率格式及在叶轮机械非定常流动中的应用

在非结构网格下,针对非定常三维N-S方程组发展了一种双时间步长高精度快速迭代格式。该格式在时间上具有二阶精度,在空间上将r=3的加权ENO格式与强紧致格式相结合去处理N-S方程中的对流项以及离散方程的右端项,并用四阶精度的紧致格式去计算N-S方程中的粘性项。典型的3个算例从不同侧面对格式进行了考核。计算表明:该算法具有高效率与高分辨率的特征,所得的计算结果与相关实验数据比较吻合,初步表明了该算法可以在非结构网格下模拟非定常流动的物理过程。      

曲率连续的非轴对称短舱气动型面参数化设计方法研究

为了进一步提高短舱内外流的气动性能,基于类别形状函数方法建立了曲率连续的非轴对称短舱气动型面参数化设计方法。主要思路是先设计关键截面型线,再设计纵向型线,最后通过纵向型线周向有序组合建立气动型面。为评价所建立的短舱气动型面设计方法的适用性,从曲率半径分布、主要工况下的流动特性和气动性能三个方面对所发展的方法和基于圆锥曲线的方法设计的超大涵道比(UHBPR)短舱进行了对比研究。结果表明：与基于圆锥曲线的方法设计的短舱相比,所建立的方法设计的短舱气动型面不存在轴向曲率半径波动。由于消除了曲率波动引起的短舱壁面附近局部过度加速形成的高速低压区,在马赫数为0.8的巡航条件下外罩壁面局部阻力降低了4.5%；在马赫数为0.82的飞行工况下,外罩壁面局部阻力降低了5.5%。进气道气动型面设计方法的改进,使得大攻角爬升条件下进气道总压恢复系数提高了0.41%,稳态周向总压畸变指数减小了8.82%。     

An enhanced least squares residual RAIM algorithm based on optimal decentralized factor

The Least Squares Residual (LSR) algorithm is commonly used in the Receiver Autonomous Integrity Monitoring (RAIM). However, LSR algorithm presents high Missed Detection Risk (MDR) caused by a large-slope faulty satellite and high False Alert Risk (FAR) caused by a small-slope faulty satellite. In this paper, the LSR algorithm is improved to reduce the MDR for a large-slope faulty satellite and the FAR for a small-slope faulty satellite. Based on the analysis of the vertical critical slope, the optimal decentralized factor is defined and the optimal test statistic is conceived, which can minimize the FAR with the premise that the MDR does not exceed its allowable value of all three directions. To construct a new test statistic approximating to the optimal test statistic, the Optimal Decentralized Factor weighted LSR (ODF-LSR) algorithm is proposed. The new test statistic maintains the sum of pseudo-range residual squares, but the specific pseudo-range residual is weighted with a parameter related to the optimal decentralized factor. The new test statistic has the same decentralized parameter with the optimal test statistic when single faulty satellite exists, and the difference between the expectation of the new test statistic and the optimal test statistic is the minimum when no faulty satellite exists. The performance of the ODF-LSR algorithm is demonstrated by simulation experiments.     

dBASE／FoxBase与INFORMIX数据文件的转换方法

在计算机信息管理领域,数据库技术正在从低档数据库(如dBASE,FoxBase 等)向高档数据库(如ORACLE,INGRES,INFORMIX 等)过渡。需要解决的一个技术问题就是将耗费大量人力、物力、财力和时间录入低档库中的数据自动地转换成高档库能够存取的数据。文章给出了dBASE/FoxBase 与INFORMIX 数据库数据文件进行双向转换的一种通用方法。不失一般性,文中所述的方法完全可以推广到与其它高档库数据文件的转换。     

测液体粘滞系数的一种方法

本文介绍了一种测液体粘滞系数的方法－“落球法”，该方法装置简单，原理清楚，有利于拓宽学生的视野，培养和提高学生的实际技能和处理数据的能力。     

以相对偏差平方和为指标函数的最小二乘法

就测量中最小二乘法用于静态模型估计的问题,分析了传统最小二乘法在某些实验条件下应用的不合理现象,提出以相对偏差平方和为指标函数的最小二乘法。简记LSR法。给出了该方法的实用公式,分析了数学特征并证明在所给实验条件下具有无偏性、一致性,有效性.给出了用该方法拟合电位差计静态特性方程的例子。证明该方法在测量工作中是有实际意义的。     

Resistance welding of glass fiber reinforced thermoplastic composite: Experimental investigation and process parameter optimization

The utilization of fiber reinforced thermoplastics (FRTP) is expected to fulfill lightweight demand in mass-produced aerospace products. Facing the unavoidable assembly of FRTP parts, fusion bonding methods such as resistance welding are promising compared with mechanical joint and adhesive bonding. In this paper, a procedure has been brought out to understand the relationship between processing conditions and performance of the FRTP welding joints. The adherends were continuous glass fiber reinforced polypropylene (GF/PP) laminates fabricated by hot-pressing method. The influences of time, current and pressure on the bending strength of the resistance welding joints were investigated. A processing window was drawn based on the optical observation of welded surfaces. The quantitative relationship between process parameters and mechanical property of GF/PP welding joint was established by Response Surface Method (RSM) with high accuracy. It was found that bending strength of GF/PP welding joint was improved by 31% compared with hot-pressing benchmark.     

Coordinated adaptive beamformer over distributed antenna network

The spatial diversity of distributed network demands the individual filter to accommodate the topology of interference environment. In this paper, a type of distributed adaptive beamformer is proposed to mitigate interference over coordinated antenna arrays network. The proposed approach is formulated as generalized sidelobe canceller (GSC) structure to facilitate the convex combination of neighboring nodes’ weights, and then it is solved by unconstrained least mean square (LMS) algorithm due to simplicity. Numerical results show that the robustness and convergence rate of antenna arrays network can be significantly improved in strong interference scenario. And they also clearly illustrate that mixing vector is optimized adaptively and adjusted according to the spatial diversity of the distributed nodes which are placed in different power of received signals to interference ratio (SIR) environments.     

基于逐次二点法三坐标测量机直线度运动误差的测量

分析了逐次二点法在三坐标测量机直线度运动误差测量方面的可行性,介绍了逐次二点法的测量原理,并定量分析了传感器及安装引起的误差。对现有的三坐标测量机进行测量,结果表明,采用逐次二点法对直线度运动误差测量实用可靠,可以满足测量的要求。