Experimental study of partially-cured Z-pins reinforced foam core composites：K-Cor sandwich structures

This paper presents an experimental study of a novel K-Cor sandwich structure rein- forced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry （DSC） and optical microscopy （OM） methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel （CDP） tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechan- ical performances of K-Cor sandwich structures.     

柔性空间结构选频二阶保结构平衡降阶

利用传统的一阶选频内平衡降阶方法进行降阶时,不但破坏了原二阶系统动力学结构,而且降阶过程中的选频Gramian矩阵的求解计算量大、数值稳定性差.利用解耦模态坐标的二阶柔性空间结构(FSS)方程的特殊性,给出了可控和可观Gramian矩阵的选频闭合解析解.为了将FSS动力学模型在指定频段进行降阶并保留原系统的二阶动力学结...     

带滑移滞变系统的三阶段逐步收敛的识别方法

针对非线性带滑移滞变系统模型复杂，参数多，识别时收敛困难等问题，提出了一种三阶段逐步收敛的识别方法对Baber与Noori提出的带滑移滞变模型进行了参数识别。计算实例表明，该方法具有收敛速度快、且容易收敛的特点，对于参数较多、模型复杂的系统，是一种非常有效的参数识别方法。     

－类非线性微分方程解空间显易结构的唯一性

对所有形如的方程的集合Ｅ（Ｄ），引入线性变换群Ｇ（Ｄ），从而将Ｅ（Ｄ）进行等价分类，并由此提出解空间显易结构唯一性概念，指出Ｂｅｒｎｏｕｌｌｉ类方程具第一显易结构，但其显易结构不唯一，而任何非Ｂｅｒｎｏｕｌｌｉ类方程着具显易结构，则其显易结构必唯一．     

展向旋转平板Couette湍流中的多态现象

展向旋转平板Couette湍流(Spanwise rotating plane Couette flow,RPCF)是旋转壁湍流的标模问题之一,在过去的几十年里,被广泛用来研究旋转对壁湍流的统计和流动结构的影响。近些年,作者及其合作者就该问题开展了一系列直接数值模拟研究工作。该研究不仅发现了旋转在低旋转数和高旋转数时对流动结构和统计的不同影响,还首次在RPCF中发现了多湍流态现象:即在相同的控制参数下,流动可以处在两种不同的湍流态上,这两种不同的湍流态的流动结构和湍流统计差别显著。还发现该多态现象可以在很大的旋转数范围里存在。进一步分析大尺度二次流在不同态的能量传输中的作用,发现在二次流较弱的流态下,二次流起的作用相对较小,能量很大一部分直接从平均流传到剩余场;而当二次流较强时,二次流起到一个能量传输纽带作用。该分析也从侧面验证了大尺度结构在多态现象中占据重要地位的猜想。     

大角速度柔性航天器动力学模型修正

将拉格朗日方程及其准坐标形式用于中心刚体加柔性附件航天器的拉格朗日函数,推导了中心刚体加柔性附件航天器动力学模型。针对航天器大角速度,分析中心刚体角速度对角动量方程的影响,对传统动力学模型进行修正。航天器绕惯量主轴大角速度自旋仿真结果验证了修正后的动力学模型对于大角速度航天器的有效性。     

Reliability design optimization of composite structures based on PSO together with FEA

The present work aims to develop a method for reliability-based optimum design of composite structures. A procedure combining particle swarm optimization (PSO) and finite element analysis (FEA) has been proposed. Numerical examples for the reliability design optimization (RDO) of a laminate and a composite cylindrical shell are worked out to demonstrate the effectiveness of the method. Then a design for composite pressure vessels is studied. The advantages and necessity of RDO over the conventional equi-strength design are addressed. Examples show that the proposed method has good stability and is efficient in dealing with the probabilistic optimal design of composite structures. It may serve as an effective tool to optimize other complicated structures with uncertainties.     

Research on uncertainty in measurement assisted alignment in aircraft assembly

Operations in assembling and joining large size aircraft components are changed to novel digital and flexible ways by digital measurement assisted alignment.Positions and orientations（P＆O）of aligned components are critical characters which assure geometrical positions and relationships of those components.Therefore,evaluating the P＆O of a component is considered necessary and critical for ensuring accuracy in aircraft assembly.Uncertainty of position and orientation（U-P＆O）,as a part of the evaluating result of P＆O,needs to be given for ensuring the integrity and credibility of the result;furthermore,U-P＆O is necessary for error tracing and quality evaluating of measurement assisted aircraft assembly.However,current research mainly focuses on the process integration of measurement with assembly,and usually ignores the uncertainty of measured result and its influence on quality evaluation.This paper focuses on the expression,analysis,and application of U-P＆O in measurement assisted alignment.The geometrical and algebraical connotations of U-P＆O are presented.Then,an analytical algorithm for evaluating the multi-dimensional U-P＆O is given,and the effect factors and characteristics of U-P＆O are discussed.Finally,U-P＆O is used to evaluate alignment in aircraft assembly for quality evaluating and improving.Cases are introduced with the methodology.     

Bayesian linking of geosynchronous orbital debris tracks as seen by the Large Synoptic Survey Telescope

We describe a Bayesian sampling model for linking and constraining orbit models from angular observations of “streaks” in optical telescope images. Our algorithm is particularly suited to situations where the observation times are small fractions of the orbital periods of the observed objects or when there is significant confusion of objects in the observation field. We use Markov Chain Monte Carlo to sample from the joint posterior distribution of the parameters of multiple orbit models (up to the number of observed tracks) and parameters describing which tracks are linked with which orbit models. Using this algorithm, we forecast the constraints on geosynchronous (GEO) debris orbits achievable with the planned Large Synoptic Survey Telescope (LSST). Because of the short 15 s exposure times, preliminary orbit determinations of GEO objects from LSST will have large and degenerate errors on the orbital elements. Combined with the expected crowded fields of GEO debris it will be challenging to reliably link orbital tracks in LSST observations given the currently planned observing cadence.     

SINS基于非线性量测的大失准角初始对准算法

针对陆用捷联惯导系统(SINS)大失准角初始对准问题,提出一种基于二阶非线性量测的二阶泰勒级数展开的初始对准算法。首先,将大失准角非线性对准问题,转化为具有线性系统方程和二阶非线性量测方程的滤波问题。然后,设计基于二阶非线性量测方程的二阶泰勒级数展开的滤波算法,可以在任意姿态和无初值条件下进行初始对准和参数估计。最后进行车载对准试验,结果表明,新算法可以在300s内完成实现大失准角初始对准,对准精度与传统分段对准算法相当。