The ultraviolet view of the Magellanic Clouds from GALEX: A first look at the LMC source catalog

The Galaxy Evolution Exporer (GALEX) has performed unprecedented imaging surveys of the Magellanic Clouds (MC) and their surrounding areas including the Magellanic Bridge (MB) in near-UV (NUV, 1771-2831 Å) and far-UV (FUV, 1344-1786 Å) bands at 5^″$5^{″}$ resolution. Substantially more area was covered in the NUV than FUV, particularly in the bright central regions, because of the GALEX FUV detector failure. The 5σ$\sigma$ depth of the NUV imaging varies between 20.8 and 22.7 (ABmag). Such imaging provides the first sensitive view of the entire content of hot stars in the Magellanic System, revealing the presence of young populations even in sites with extremely low star-formation rate surface density like the MB, owing to high sensitivity of the UV data to hot stars and the dark sky at these wavelengths.     

Measurement of neutron star parameters: A review of methods for low-mass X-ray binaries

Measurement of at least three independent parameters, for example, mass, radius and spin frequency, of a neutron star is probably the only way to understand the nature of its supranuclear core matter. Such a measurement is extremely difficult because of various systematic uncertainties. The lack of knowledge of several system parameter values gives rise to such systematics. Low mass X-ray binaries, which contain neutron stars, provide a number of methods to constrain the stellar parameters. Joint application of these methods has a great potential to significantly reduce the systematic uncertainties, and hence to measure three independent neutron star parameters accurately. Here, we review the methods based on: (1) thermonuclear X-ray bursts; (2) accretion-powered millisecond-period pulsations; (3) kilohertz quasi-periodic oscillations; (4) broad relativistic iron lines; (5) quiescent emissions; and (6) binary orbital motions.     

高精度板料半模成形新工艺

通过三个精密零件的成形实验，介绐了以粘塑性材料作传力介质的板料半模成形工艺的特点，研究了拉延过程中抗延力、压边力、容框内压的变化规律，工艺参数的控制对拉延所成败及产品质量的影响。     

水杨醛缩－5－碘－8－氨基喹啉新西夫碱试剂的合成及其分析应用研究──分光光度法测定痕量镓

本文介绍了水杨醛缩－５－碘－８－氨基喹啉新西夫碱的合成、提纯与鉴定。特别对其性质及其与镓金属离子显色反应的光度特性作了研究，其配合物３．４９×１０４Ｌ·ｍｏｌ（－１）·ｃｍ（－１）．     

仿真模型检验的新工具

本文是从阐述姿控系统仿真模型检测的重要性以及检测手段需不断改进的观点出发,介绍计算机频率特性测试软件(ftsp)的主要优点和用途。     

Numerical simulations of spicule driving mechanisms

Spicules are known as one of the most prevalent small-scale dynamic phenomena on the sun, which are likely to give considerable contribution to coronal heating and mass supply. We discuss a model of the spicules driven by a train of slow MHD shock waves propagating along a vertical expanding magnetic flux tube. The shocks are initiated due to compression of the tube by the increasing external pressure in the lower chromosphere. Downflow of spicular material depends on radiative cooling and other dissipative processes.     

一种地外天体路标图像的稀疏化表征方法

摘要： 针对用于地外天体着陆视觉导航的路标图像信息存在的计算量大和占用存储空间大等问题,提出一种路标图像的稀疏化表征方法.引入着陆路标图像的尺度估计和尺度变换,采用Harris 算法提取路标特征点,改进了FREAK特征描述子用以稀疏化表征天体路标信息;并针对图像旋转、尺度变化、图像噪声和尺度估计误差4种外界干扰,仿真对比改进算法与原FREAK算法、SURF算法的性能.仿真结果表明：提出的算法大幅减少计算量和特征描述子所占用的存储空间,同时能够正确匹配到更多的路标特征,鲁棒性更好,更适合地外天体着陆任务应用.     

脉冲等离子体推力器放电电离二维PIC建模与仿真

摘要： 针对脉冲等离子体推力器（PPT）的放电过程,利用粒子网格 蒙特卡洛（PIC MCC）方法建立仿真计算模型.以LES 6 PPT为例,加入电离碰撞进行电离仿真.通过粒子运动碰撞与电磁场耦合仿真计算得到电流与电路总电阻的变化规律,揭示了PPT放电过程中等离子体密度分布情况.通过对比不加入粒子预分布与加入粒子预分布的两种条件下的计算结果,得到了加入粒子预分布使带电粒子密度计算结果更接近实验结果的结论.根据PPT的工作过程,在放电之前推力器内存在等离子体,所以在仿真研究中应进行粒子的预分布.文中的研究方法对PPT的粒子方法模拟具有一定的参考意义.