诱发卫星深层充电的高能电子环境模式研究

文章介绍了与卫星介质深层充电相关的辐射带高能电子环境的主要特征和规律,建立了相应的高能电子环境模式及软件,并运用该模式针对某飞行器的深层充放电危险性进行了分析和评估。结果表明该模式相对于AE8模式更好地反映了高能电子环境的动态特征,与欧空局建立的FLUMIC模式符合较好。该模式与深层充电分析模型相结合,可用于对航天器的充放电异常进行在轨诊断,以及在工程上针对深层充电进行防护设计。     

基于多特征融合的航天器锂电池健康评估技术

传统的航天器蓄电池可靠性试验按照最大放电深度进行定额充放电，所构建的失效模型用于支撑航天器总体可靠性设计，不能用于在轨锂离子蓄电池健康评估任务；航天器在蓄电池遥测的采样率、精度、样本量方面无法与民用领域相比，基于高采样、大样本的民用蓄电池健康估计方法也不适用于在轨锂离子蓄电池健康评估。针对该问题，从在轨航天器蓄电池数据特性出发，挖掘在轨状态下所能提取的退化特征，并采用多特征综合评价方法，设计了一种基于多特征融合的在轨锂离子蓄电池健康评估方法，实现了在轨蓄电池放电内阻、同放电深度下的终端电压、恒压充电时间3项退化特征融合的健康量化评估，应用于某型号卫星的在轨监测与健康评估，具有良好的工程实用性，可作为国内航天器健康评估技术的参考。     

二维装药内弹道数值模拟改进方法

研究了长细比大的管形装药固体火箭发动机在燃烧过程中的侵蚀燃烧和滞点漂移现象，视燃烧产物为准定常流动，使用分段解析法，进行内流场的数据模拟，并对滞点漂移进行了计算。     

计入带电粒子入射角度对次级电子效应影响时航天飞行器的带电特性

本文采用由实验得到的带电粒子入射角度对次级电子的影响关系,根据轨道限制电流收集理论,导出了不同几何形体航天器的次级电子数通量表达式;并按局部电流平衡模型,计算了航天器背阴面的带电电位。结果表明,计入带电粒子入射角的影响后,航天器表面负电位的数值有一定减少。因此,在计算航天器表面带电时,应当考虑这种影响。     

Variable stiffness design of redundantly actuated planar rotational parallel mechanisms

Redundantly actuated planar rotational parallel mechanisms (RAPRPMs) adapt to the requirements of robots under different working conditions by changing the antagonistic internal force to tune their stiffness. The geometrical parameters of the mechanism impact the performances of modulating stiffness. Analytical expressions relating stiffness and geometrical parameters of the mechanism were formulated to obtain the necessary conditions of variable stiffness. A novel method of variable stiffness design was presented to optimize the geometrical parameters of the mechanism. The stiffness variation with the internal force was maximized. The dynamic change of stiffness with the dynamic location of the mechanism was minimized, and the robustness of stiff-ness during the motion of the mechanism was ensured. This new approach to variable stiffness design can enable off-line planning of the internal force to avoid the difficulties of on-line control of the internal force.     

"流行书风"的内在特征与形成原因

"流行书风"的形成与当时书法艺术家主体的完全独立、书法理论界的思想解放、创作主体对创作的个性化与原创性追求,以及以国家级的展览为代表的展厅文化的推波助澜息惠相关.只要其"根植传统、张扬个性"的宗旨不变,在当前乃至今后一个较长的时期,它将一如既往地继续"流行".     

Shape control of spacecraft formation using a virtual spring-damper mesh

This paper derives a distance-based formation control method to maintain the desired formation shape for spacecraft in a gravitational potential field. The method is an analogy of a vir-tual spring-damper mesh. Spacecraft are connected virtually by spring-damper pairs. Convergence analysis is performed using the energy method. Approximate expressions for the distance errors and control accelerations at steady state are derived by using algebraic graph representations and results of graph rigidity. Analytical results indicate that if the underlying graph of the mesh is rigid, the convergence to a static shape is assured, and higher formation control precision can be achieved by increasing the elastic coefficient without increasing the control accelerations. A numerical exam-ple of spacecraft formation in low Earth orbit confirms the theoretical analysis and shows that the desired formation shape can be well achieved using the presented method, whereas the orientation of the formation can be kept pointing to the center of the Earth by the gravity gradient. The method is decentralized, and uses only relative measurement information. Constructing a distributed virtual structure in space can be the general application area. The proposed method can serve as an active shape control law for the spacecraft formations using propellantless internal forces.     

分叉尾喷管气动性能实验研究

某涡轴发动机尾喷管由环形转接段和双管急弯收扩段组成，其形状呈“裤衩”形。在模拟涡轮出口旋流的条件下进行了喷管模型内流气动试验，采用双向总压探针测量喷管内大回流区，发现从３３°截面开始的大分离区对喷管性能有重大影响。在给定流量条件下，通过该流量的喷管进出口压比Ｐ＊５／Ｐ６远比无分离的理论值要高。试验证明导流板是减少喷管气流分离、提高扩压比、降低进口总压的有效措施。Ｐ＊５／Ｐ６可降低１．７％左右。     

旋风式燃气过滤器的冷流实验和内流场模拟

为了考察某导弹系统燃气发生器的旋风式燃气过滤器的除尘特性，对其进行了冷流实验研究，对除尘效率进行了模拟测量，并应用多流体模型的IPSA算法对其内流场进行了三维两相的数值模拟。计算结果与实验结果较符合，计算得到的分离界限粒径为2μm--3μm。