一种改进的基于双矢量观测的姿态确定算法

为了提高飞行器姿态确定的精度和姿态矩阵的解算速度,提出了一种改进的双矢量定姿算法.这种算法利用测量系统的方差对两个观测矢量进行加权处理,求得一个新的矢量,以两观测矢量夹角为判断依据选取加权系数;以新矢量为基准矢量,利用双矢量定姿算法求解姿态矩阵,并对求得的姿态矩阵进行修正.仿真结果表明:这种算法所需时间为优化算法的50%,当两个传感器测量误差不同、两矢量为任意夹角时,这种算法比优化的双矢量算法精度高;当两个传感器测量误差相同时,除了两矢量夹角为90°外,这种算法均比优化的双矢量算法精度高.     

含钟差修正的脉冲星和太阳观测组合导航

为提高深空探测器巡航段的导航定位精度和钟差修正能力,提出一种利用X射线脉冲星和太阳观测信息的组合导航方法.利用脉冲星导航的脉冲到达时间测量值,同时利用太阳敏感器、分光计分别测量太阳视线矢量和探测器相对于太阳的径向速度,并将星载时钟钟差增广为状态变量,构建组合导航系统,利用基于扩展卡尔曼滤波的UD(Upper triangular matrix-Diagonal matrix)分解信息融合算法进行状态估计.仿真结果表明,该方法能有效解决因钟差漂移引起的导航滤波发散问题,同脉冲星导航相比,该方法提高了定位精度和钟差修正能力.     

A debris image tracking using optical flow algorithm

This study proposes a motion detection and object tracking technique for GEO debris in a sequence of images. A couple of techniques (called the “stacking method” and “line-identifying technique”) were recently proposed to address the same problem. Although these techniques are effective at detecting the debris position and motion in the image sequences, there are some issues concerned with computational load and assumed debris motion. This study derives a method to estimate motion vectors of objects in image sequence and finally detect the debris locations by using a computer vision technique called an optical flow algorithm. The new method detects these parameters in low computational time in a serial manner, which implies that it has an advantage to track not only linear but also nonlinear motion of GEO debris more easily than the previous methods. The feasibility of the proposed methods is validated using real and synthesized image sequences which contain some typical debris motions.     

空间碎片现状与清理

分析了空间碎片的严峻现状和空间碎片的10个来源,指出轨道碰撞是产生碎片最多的因素;介绍了空间碎片的观测方法、原理和观测系统的概况,包括正在兴建的观测系统——“空间篱笆”。最后,根据不同轨道高度和空间碎片的数量与大小,提出空间碎片清理原则、要求和9种清理方法。     

基于四元数的UKF多传感器卫星姿态确定

对采用磁强计和太阳敏感器的卫星姿态模型,应用无迹卡尔曼滤波(UKF)算法确定卫星姿态。由四元数描述姿态,在算法中将其转换成旋转矢量,另设计了四元数求均值的迭代算法,解决了四元数在UKF算法中的处理。仿真结果表明:广义卡尔曼滤波(EKF)算法对初值依赖性较大,UKF算法不受初值影响且精度高于EKF,具快速性、精度高和稳定性强等优点。     

一种新型机载对地观测用三轴稳定平台陀螺安装方式

陀螺安装方式及相应的算法编排是稳定平台设计中的一项关键技术。针对机载对地观测用三轴稳定平台特点,提出了将方位陀螺安装在方位环上,俯仰陀螺和横滚陀螺安装在俯仰环上的陀螺安装方式。利用空间矢量分解理论分析了陀螺输出角速度信号的投影关系及电机控制信号的分配;基于稳定平台系统模型,对理想正交情况和考虑陀螺安装误差情况进行了仿真分析,验证了此种安装方式的可行性和优越性。分析表明,在同等条件下,所提出的安装方式减小了稳定平台的机械尺寸,降低了稳定平台的重量和功耗,实现了三维角速度的正交测量,简化了三轴解耦控制算法。研究结论可为其他三轴稳定平台结构设计和陀螺安装方式设计提供参考。     

Feasibility of performing space surveillance tasks with a proposed space-based optical architecture

Under ESA contract an industrial consortium including Aboa Space Research Oy (ASRO), the Astronomical Institute of the University of Bern (AIUB), and the Dutch National Aerospace Laboratory (NLR), proposed the observation concept, developed a suitable sensor architecture, and assessed the performance of a space-based optical (SBO) telescope in 2005. The goal of the SBO study was to analyse how the existing knowledge gap in the space debris population in the millimetre and centimetre regime may be closed by means of a passive optical instrument. The SBO instrument was requested to provide statistical information on the space debris population in terms of number of objects and size distribution. The SBO instrument was considered to be a cost-efficient with 20 cm aperture and 6° field-of-view and having flexible integration requirements. It should be possible to integrate the SBO instrument easily as a secondary payload on satellites launched into low-Earth orbits (LEO), or into geostationary orbit (GEO). Thus the selected mission concept only allowed for fix-mounted telescopes, and the pointing direction could be requested freely. Since 2007 ESA focuses space surveillance and tracking activities in the Space Situational Awareness (SSA) preparatory program. Ground-based radars and optical telescopes are studied for the build-up and maintenance of a catalogue of objects. In this paper we analyse how the proposed SBO architecture could contribute to the space surveillance tasks survey and tracking. We assume that the SBO instrumentation is placed into a circular sun-synchronous orbit at 800 km altitude. We discuss the observation conditions of objects at higher altitude, and select an orbit close to the terminator plane. A pointing of the sensor orthogonal to the orbital plane with optimal elevation slightly in positive direction (0° and +5°) is found optimal for accessing the entire GEO regime within one day, implying a very good coverage of controlled objects in GEO, too. Simulations using ESA’s Program for Radar and Optical Observation Forecasting (PROOF) in the version 2005 and a GEO reference population extracted from DISCOS revealed that the proposed pointing scenario provides low phase angles together with low angular velocities of the objects crossing the field-of-view. Radiometric simulations show that the optimal exposure time is 1–2 s, and that spherical objects in GEO with a diameter of below 1 m can be detected. The GEO population can be covered under proper illumination nearly completely, but seasonal drops of the coverage are possible. Subsequent observations of objects are on average at least every 1.5 days, not exceeding 3 days at maximum. A single observation arc spans 3° to 5° on average. Using a simulation environment that connects PROOF to AIUB’s program system CelMech we verify the consistency of the initial orbit determination for five selected test objects on subsequent days as a function of realistic astrometric noise levels. The initial orbit determination is possible. We define requirements for a correlator process essential for catalogue build-up and maintenance. Each single observation should provide an astrometric accuracy of at least 1”–1.5” so that the initially determined orbits are consistent within a few hundred kilometres for the semi-major axis, 0.01 for the eccentricity, and 0.1° for the inclination.     

Sumbandilasat—An operational technology demonstrator

Technology advances in sensor, digital technology and a standardised modular satellite bus are enabling a new generation of 80 kg micro-satellites with a better than 6.5 m GSD multi-spectral performance, to be specified, built and deployed with a dedicated launch within 12 months. The result of the standardised modular bus is lower cost, higher reliability and fast deployment. Operational remote sensing with a micro-satellite is thus within reach of individual organisations for dedicated missions. Sumbandilasat (pioneer in the Venda language) is a second generation satellite technology building on the expertise obtained in the Sunsat small satellite programme. The components used to build Sumbandilasat are the result of a technology development program of more than 3 years. Sumbandilasat is an operational technology demonstrator with more than 90% newly developed or improved subsystems and a compact refractive imager as a precursor to the MSMISat satellite with the same multi-spectral band set. The scalable, standardised modular satellite bus architecture enables satellites with a mass of 80–450 kg to be adapted to the specific mission requirements with minimum new engineering effort.     

国外卫星星座自主运行技术发展综述

综述国外卫星星座自主运行技术的研究和发展情况,重点介绍了导航星座、移动通信星座和区域覆盖星座的自主导航和自主轨道控制技术的发展现状,并对实现星座自主控制的关键技术进行了分析。这为我国发展星座自主控制技术提供参考。     

ESA开展GEO上小碎片的调查

文章主要介绍了欧空局开展地球同步轨道(GEO)小碎片的调查情况及相应技术.