远程导引可行飞行方案寻求算法研究

提出了一种寻求远程导引可行飞行方案的算法，能够满足远程导引对测控、日照、燃料和时间等各方面的要求；重点论述了Lambert一次变轨方案，给出了算法的具体步骤和主要模块的实现方法；最后给出了一个算例，说明算法是切实可行的。     

Influence of thickness and initial groove angle in M–K model on limit strain of 7B04 by considering through-thickness stress

Marciniack–Kuczinski(M–K) model is widely used to predict material’s forming limit curve(FLC).The prediction of FLC traditionally neglected through-thickness normal stress.However, it cannot be neglected in some forming processes.Much work has been done to study the effect of through-thickness normal stress on FLC with constant through-thickness normal stress or constant ratio of through-thickness normal stress and maximum principal stress.In addition, based on Nakazima test process, the ratio o...     

带角度约束的多飞行器编队协同拦截制导律设计

针对多枚飞行器协同拦截同一目标的问题,在最优控制与时间调整相结合的基础上,设计了一种带有时间约束与角度约束的协同制导律。首先,在初始时刻(或中段制导结束时刻),根据初始状态及终端角度约束情况,以指定策略为编队中的各飞行器分配拦截角度。其次,采用线性化最优控制的设计方法,解算带有拦截角度约束的最优导引指令。最后,在求解针对运动目标的飞行器剩余时间估计的基础上,根据一致性的方法推导时间调整项的导引指令。仿真结果表明,在典型背景下,设计的制导律能够使多枚飞行器以特定的编队构型协同拦截同一目标,从而有效提高拦截概率。     

基于结构不确定性的非线性鲁棒制导律设计

根据多普勒雷达导引头和红外成像导引头多模制导导弹弹道中段制导信息精度的特点,以非线性鲁棒控制理论为依据,设计了一种制导律.仿真结果表明,该制导律对弹目相对距离测量干扰有较好的鲁棒性,对目标大机动也有鲁棒性.因此,这种制导律可以作为多普勒雷达导引头和红外成像导引头多模制导导弹弹道中段的制导律使用.     

A joint mid-course and terminal course cooperative guidance law for multi-missile salvo attack

Salvo attacking a surface target by multiple missiles is an effective tactic to enhance the lethality and penetrate the defense system. However, existing cooperative guidance laws in the mid-course or terminal course are not suitable for long- and medium-range missiles or stand-off attacking. Because the initial conditions of cooperative terminal guidance that are generally generated from the mid-course flight may not lead to a successful cooperative terminal guidance without proper mid-course flight adjustment. Meanwhile, cooperative guidance in the mid-course cannot solely guarantee the accuracy of a simultaneous arrival of multiple missiles. Therefore, a joint mid-course and terminal course cooperative guidance law is developed. By building a distinct leader-follower framework, this paper proposes an efficient coordinated Dubins path planning method to synchronize the arrival time of all engaged missiles in the mid-course flight. The planned flight can generate proper initial conditions for cooperative terminal guidance, and also benefit an earliest simultaneous arrival. In the terminal course, an existing cooperative proportional navigation guidance law guides all the engaged missiles to arrive at a target accurately and simultaneously. The integrated guidance law for an intuitive application is summarized. Simulations demonstrate that the proposed method can generate fast and accurate salvo attack.     

具有终端角度和终端时间约束的闭环制导律及其可行性分析

研究了同时具有终端角度(攻击角度)和终端时间(攻击时间)约束的制导问题.通过将非线性运动学制导模型中的自变量由导引时间变换为速度方向角,可以利用最小值原理直接推导出一种闭环形式制导律,而不必引入任何的线性化处理.在该制导律的导引下,导弹能够精确击中目标并且精确满足终端时间和角度的约束.为了研究该制导律的可行性,本文定义并分析了若干重要参数的可行域.该闭环制导律及其可行性分析被应用于多弹齐射攻击的两种情况.数字仿真结果验证了所提出方法的有效性.     

初值不确定轨道可达区域计算

为计算航天器轨道初值不确定造成的可达区域（RD）,提出一种适用于椭圆参考轨道的计算方法。以航天器的名义轨道作为基线,定义一个随时间变化的移动参考平面,在此移动平面上建立名义轨道到可达区域上任一点的距离函数,函数的极大值点即为可达区包络的边界点,从而将问题转换为非线性方程组的求解问题,并对动力学模型部分线性化带来的误差进行了分析。随后采用变参数的自适应同伦算法对方程组进行求解。最后对航天器释放微小卫星的实例进行数值仿真,结果显示该方法可行有效。     

捷联惯导方位大失准角对准研究

在游动方位角坐标系下建立了方位大失准角条件下的SINS初始对准误差模型.在静基座下验证了该误差模型在方位大失准角情况下的滤波效果,比较分析了不同方位失准角的滤波收敛情况,并与线性模型进行滤波比较.最后,将该模型用于动基座的初始对准.静基座和动基座下的初始对准结果表明所提出的SINS误差模型是正确有效的.     

固体火箭的鲁棒自适应耗尽关机制导方法研究

针对固体火箭的耗尽关机制导问题,提出了一种基于闭路制导和零射程线相结合的自适应耗尽关机制导方法,该方法首先利用闭路制导技术,使待增速度快速收敛;随后基于零射程线理论,设计了对关机时间变化不敏感的零射程线能量耗散管理导引律和末速精调导引律,提高了耗尽关机方法在推力、秒耗、关机时间随机摄动条件下的鲁棒性和自适应性以及制导精度,从而拓展了耗尽关机显示制导方法的工程化应用.     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.