扫描器运动多参数测试技术研究

新型图像扫描器具有较高的响应频率，可以实现高速扫描。在研究扫描器运动参数分离的基础上，利用对称放置的半导体位置探测器建立了扫描器的多运动参数测试系统，提出了光电二维位置传感器的非线性修正和补充方法，实现了四路模拟信号的DMA传送，提高了测试的速度和精度，实现扫描器在高频运动时的多运动参数测试。     

非线性传感器静态特性评估的极限点法

基于对测量过程、测量误差的认识，提出了一种利用极限点法评估非线性传感器静态特性的一种新方法。给出了利用该方法评估非线性传感器的两种模型。并以一电涡流式非线性位移传感器的标定数据进行了计算、分析。     

STUDY ON ALGORITHM OF SENSOR MANAGEMENT BASED ON FUNCTIONS OF EFFICIENCY AND WASTE

The sensor management system is a subsys-tem of a multisensor data fusion system,and itspurpose is to satisfy requests of multitarget andscanned space by using the limited sensor resourcesin order to gain optimal measurement values of allspecified characteristics ( detection and captureprobability,emission power of sensor,trackingprecision or target losing probability and so on) .By the optimal principle listed above,sensor re-sources are distributed in science and reason.In aword,itis a key p…     

小突片对热射流红外辐射的影响研究

实验研究了收敛喷管在高温（约913K）、高速（超临界）流动状态下，加装小突片后对热排气的红外辐射抑制特性，并探讨了小突片安装片数、后倾角度、堵塞比等因素对红外辐射抑制特性的影响。结果表明，小突片对热排气的红外辐射具有明显的抑制作用，与不装小突片的相比，不仅使热排气的核心区长度大为缩短，而且使热排气的总体红外辐射信号大幅度下降（在实验范围内，最大可下降约73％）。     

红外隐身材料的现状与展望

综述了国内外红外隐身材料的发展历程，重点介绍了构成红外隐身材料的填料、树脂的研究现状以及近年来开始重点研究的红外兼容型多频谱隐身材料，并且指出了红外隐身材料的发展方向。     

The Cassini Cosmic Dust Analyzer

The Cassini-Huygens Cosmic Dust Analyzer (CDA) is intended to provide direct observations of dust grains with masses between 10⁻¹⁹ and 10⁻⁹ kg in interplanetary space and in the jovian and saturnian systems, to investigate their physical, chemical and dynamical properties as functions of the distances to the Sun, to Jupiter and to Saturn and its satellites and rings, to study their interaction with the saturnian rings, satellites and magnetosphere. Chemical composition of interplanetary meteoroids will be compared with asteroidal and cometary dust, as well as with Saturn dust, ejecta from rings and satellites. Ring and satellites phenomena which might be effects of meteoroid impacts will be compared with the interplanetary dust environment. Electrical charges of particulate matter in the magnetosphere and its consequences will be studied, e.g. the effects of the ambient plasma and the magnetic field on the trajectories of dust particles as well as fragmentation of particles due to electrostatic disruption.The investigation will be performed with an instrument that measures the mass, composition, electric charge, speed, and flight direction of individual dust particles. It is a highly reliable and versatile instrument with a mass sensitivity 10⁶ times higher than that of the Pioneer 10 and 11 dust detectors which measured dust in the saturnian system. The Cosmic Dust Analyzer has significant inheritance from former space instrumentation developed for the VEGA, Giotto, Galileo, and Ulysses missions. It will reliably measure impacts from as low as 1 impact per month up to 10⁴ impacts per second. The instrument weighs 17 kg and consumes 12 W, the integrated time-of-flight mass spectrometer has a mass resolution of up to 50. The nominal data transmission rate is 524 bits/s and varies between 50 and 4192 bps.This revised version was published online in July 2005 with a corrected cover date.     

燃气涡轮发动机地面试验传感器数据确认概念与方法研究

本文介绍了燃气涡轮发动机传感器数据确认系统的研究与应用现状,详细阐述了基于发动机和试验系统物理模型的解析冗余检验相关多传感器信号有效性方法,以及基于信号序列统计与时频特征分析的单传感器通道信号有效性的确认方法,提出了传感器数据有效性确认系统的研究框架。     

基于经验模式分解法的航空发动机振动传感器故障诊断技术研究

在深入研究经验模式分解法基本理论的基础上,针对航空发动机振动传感器故障的时频特征,提出一种基于经验模式分解法的传感器故障诊断新方法.该方法的关键在于将含有传感器故障的航空发动机振动测试信号进行经验模式分解,利用这种方法的局部自适应特性和时频多分辨率分析将传感器输出信号的局部特性细化,使故障信息凸显出来.分析结果表明,该方法可以准确诊断传感器软、硬故障,有效降低误报率和漏报率,具有很好的应用价值.     

基于超磁致伸缩材料的FBG电流传感器温度特性研究

针对基于超磁致伸缩材料的FBG电流传感器,分析了温度对传感头各个部分和整个传感头的影响,通过试验研究了FBG、Fe—Ga超磁致伸缩棒以及传感头三个部分的温度特性。结果表明,FBG的温度特性为线性,Fe—Ga超磁致伸缩棒以及传感头的温度特性整体为非线性,Fe—Ga超磁致伸缩棒的温度响应大于FBG的温度响应,传感头的温度特性主要取决于Fe—Ga超磁致伸缩棒的温度特性。在26℃到60℃范围内,根据传感头的温度特性,可采取分段补偿的方法消除温度影响,将温度特性分为线性区和非线性区两个范围,分别得到了传感头温度特性拟合方程。     

低成本无人机传感器配置方案的设计与仿真

以降低无人机制造成本为目标,在保证无人机安全自主飞行的前提下,提出了基于GPS和垂直陀螺、GPS和三轴速率陀螺及GPS和低成本惯性组件的3种低成本传感器配置方案,并针对每种方案在工程中遇到的问题,采用低通滤波、高通滤波和卡尔曼滤波等数据融合算法予以解决,最后在MATLAB平台下对每种传感器配置方案进行仿真验证.研究对比表明,对于自身稳定性较好的无人机,该3种传感器配置方案均能够实现姿态控制、高度控制、滚转控制以及航迹控制.