动态系统时延参数估计的重构输入法

首先指出了过去在进行时延系统参数估计时所用的近似处理方法的弊端，然后就动态系统未知时延参数的估计问题提出了重构系统输入的估计方法，并以极大似然估计迭代算法为基础给出了一套估计动态系统时延参数的算法，最后，应用所提出的方法进行了仿真计算，仿真结果表明，参数估计的精度极高，这说明该方法是可靠且可行的。     

一种遥测缓变参数自动判读的新方法

针对遥测参数中缓变参数的自动判读问题，提出一种基于历史数据统计特性的遥测缓变参数自动判读新方法。首先，设计了一种以参数目标数据时标为基准的时间间隔递推算法和线性插值方法，使历史数据与目标数据的时标得到有效统一。其次，基于方向和距离函数构造了双因子等价权函数，并利用抗差最小二乘估计算法得到了参数的估值和标准差。最后，根据参数的估值和标准差对目标数据进行统计分析，依据目标数据的概率分布判断参数是否存在异常，进而实现参数的自动判读。仿真校验结果表明，该方法能有效辨识缓变参数中的异常参数，且具有较强的抑制随机噪声和抗差自适应能力。与传统以人工为主的判读方式相比，该方法能有效提高遥测参数判读的效率和准确性。     

Solar terrestrial effects of two distinct types

The occurrence frequencies or fluxes of most of the solar phenomena show a 11-year cycle like that of sunspots. However, the average characteristics of these phenomena may not show a 11-year cycle. Among the terrestrial parameters, some related directly to the occurrence frequencies of solar phenomena (for example, ionospheric number densities related to solar EUV fluxes which show 11-year cycle like sunspots) show 11-year cycles, including the double-peak structures near sunspot maxima. Other terrestrial parameters related to average characteristics may not show 11-year sunspot cycles. For example, long-term geomagnetic activity (Ap or Dst indices) is related to the average interplanetary solar wind speed V and the total magnetic field B. The average values of V depend not on the occurrence frequency of ICMEs and/or CIRs as such, but on the relative proportion of slow and high-speed events in them. Hence, V values (and Ap values) in any year could be low, normal or high irrespective of the phase of the 11-year cycle, except that during sunspot minimum, V (and Ap) values are also low. However, 2–3 years after the solar minimum (well before sunspot maximum), V values increase, oscillate near a high level for several years, and may even increase further during the declining phase of sunspot activity, due to increased influence of high-speed CIRs (corotating interplanetary regions). Thus, Ap would have no fixed relationship with sunspot activity. If some terrestrial parameter shows a 11-year cycle, chances are that the solar connection is through the occurrence frequencies (and not average characteristics) of some solar parameter.     

矢量观测确定卫星姿态的预测粒子滤波算法

在矢量观测的基础上,针对单独的星敏感器定姿,提出了一种将粒子滤波(PF)和预测滤波相结合的姿态确定算法,通过设计粒子初始化,结合重要性采样、重采样和规则化等手段,成功地将姿态四元数作为状态粒子进行更新和传递,避免了状态方程的线性化和协方差矩阵的计算;利用预测滤波算法估计模型误差和姿态角速度,在保证滤波精度的同时,有效降低了粒子滤波器的维数.实验在某对地观测通用小卫星平台上进行,选取卫星自由飞行状态和飞轮控制对地稳定模式,分别对滤波器进行了仿真,实验结果验证了该算法对本质非线性、非高斯的卫星姿态估计问题具有快速的收敛性能和良好的稳定精度.该方法还为粒子滤波器的设计和无角速度敏感器测量的飞行器姿态确定提供了借鉴.     

Cubesat solar sail 3-axis stabilization using panel translation and magnetic torquing

A Cubesat mission with a deployable solar sail of 5 meter by 5 meter in a sun-synchronous low earth orbit is analyzed to demonstrate solar sailing using active attitude stabilization of the sail panel. The sail panel is kept parallel to the orbital plane to minimize aerodynamic drag and optimize the orbit inclination change caused by the solar pressure force normal to the sail surface. A practical control system is proposed, using a combination of small 2-dimensional translation of the sail panel and 3-axis magnetic torquing which is proved to have sufficient control authority over the gravity gradient and aerodynamic disturbance torques. Miniaturized CMOS cameras are used as sun and nadir vector attitude sensors and a robust Kalman filter is used to accurately estimate the inertially referenced body rates from only the sun vector measurements. It is shown through realistic simulation tests that the proposed control system, although inactive during eclipse, will be able to stabilize the sail panel to within ±2° in all attitude angles during the sunlit part of the orbit, when solar sailing is possible.     

GPS的多尺度滤波算法研究

将基于模型的GPS动态系统分析方法与基于统计特性的多尺度信号变换方法相结合,在某一尺度上给定的单传感器单模型动态系统中建立起一个新的多尺度动态模型。基于建立的多尺度模型和常规Kalman滤波,提出一个能同时对随机信号进行多尺度分解与多尺度估计的新算法,并通过Haar小波仿真试验获得了比仅利用Kalman滤波更好的估计效...     

火花型合成射流激励器流动特性及其激励参数数值研究

利用能量方程中的源项模拟电火花能量的输入,数值模拟了火花型合成射流激励器的流场,获得了激励器的能量蓄积、喷射和吸入过程.结果表明:电火花瞬间能量的输入产生了腔体内的高温、高压环境,从而诱发合成射流的形成;在周期性激励下,合成射流在3个周期后稳定,喷口处的速度呈现非正弦的周期性变化,射流喷射过程时间极短,吸入外界环境气体...     

自修复飞控系统仿真平台研制

采用ＳＩＭＵＬＩＮＫ这种可视化、模块化和一体化的动态系统仿真软件，并与ＭＡＴＬＡＢ软件工具箱相结合，开发出自修复飞控系统仿真平台，解决了飞机的气动参数随飞行状态变化的问题，实现了飞机的全面运动仿真。该系统可根据自修复飞控系统的需要，进行飞机故障的加载，以及对故障进行检测、隔离和估计，然后完成飞行重构，具备完整的自修复飞控系统仿真功能。     

多站可变弧段直接最佳弹道估计

本文首先给出了较全面的外测多站处理计算模型,然后,选取实用的M估计方法估算参数;在解算线性模型过程中,采用了避免待估参数系数矩阵求逆的方法,它在工程应用上,是简捷、有效的。     

随机振动校准加速度计方法研究

介绍了随机振动校准加速度计系统的实现.使用随机信号传感器绝对校准方法,得到了较为理想的加速度计频响曲线.与传统的方法相比在保证校准精度的前提下,提高了效率.