组分变化对甲烷氧化特性影响

在射流搅拌反应器实验平台上针对温度范围850～1300K、常压条件下的甲烷氧化反应过程进行了实验研究,采用气相色谱仪测量了变组分条件下(当量比范围0.2～2、氧气体积分数2％～8％、二氧化碳体积分数0～20％、水蒸气体积分数0～20％)主要反应物(CH4、O2)、主要中间组分(C2H6、C2H4、C2H2、H2)和主要...     

Trailing-edge shock loss control with self-sustaining synthetic jet in a supersonic compressor cascade

To effectively reduce the loss of strong shock wave at the trailing edge of the supersonic cascade under high backpressure, a shock wave control method based on self-sustaining synthetic jet was proposed. The self-sustaining synthetic jet was applied on the pressure side of the blade with the blow slot and the bleed slot arranged upstream and downstream of the trailing-edge shock,respectively. The flow control mechanism and effects of parameters were investigated by numerical simulation. The res...     

类火星环境中火箭起降过程喷流影响研究

采用尺度自适应模拟（Scale Adaptive Simulation, SAS）方法对火箭在起降过程中喷流的地面效应进行了数值研究，对比分析了在海平面和类火星环境下的喷流冲击倾斜地面和水平地面时的流场结构以及喷管的侧向载荷。在海平面环境下，喷管内部出现流动分离，喷管内壁压力先减小，在分离点处压力达到最低点，然后压力增加至环境压力。喷流冲击倾斜地面时具有更强烈的流动不稳定性，喷流出现明显的时间演化现象。在类火星环境下，喷管内部不发生流动分离，内壁的压力沿着流向逐渐减小。喷流冲击倾斜地面时，在喷管出口的外侧形成了上下移动的马赫盘；喷流冲击水平地面时，喷流和地面反弹气流相互作用，阻碍了马赫盘的形成。研究结果还表明在类火星环境和海平面环境下，喷流冲击倾斜地面时喷管内壁温度均上升。研究结果将为火箭回收和火星着陆的方案选取提供参考。     

Bayesian uncertainty analysis of SA turbulence model for supersonic jet interaction simulations

The Reynolds Averaged Navier-Stokes(RANS) models are still the workhorse in current engineering applications due to its high efficiency and robustness. However, the closure coefficients of RANS turbulence models are determined by model builders according to some simple fundamental flows, and the suggested values may not be applicable to complex flows, especially supersonic jet interaction flow. In this work, the Bayesian method is employed to recalibrate the closure coefficients of Spalart-Allma...     

Unsteady analysis of jet impingement under vibration conditions

The vibration of thermodynamic machinery will affect its cooling system. In this research, a high-resolution simulation of jet impingement was performed to quantify the unsteady turbulent convection under vibration conditions. A newly developed Self-Adaptive Turbulence Eddy Simulation(SATES) method was used. The Reynolds number was Re = 23000, the jet-towall distance was fixed at H/D = 2, and the vibrating frequency of the impinging wall f varied from 0 to 200 Hz. Compared with the static wall c...     

Aerodynamic characteristics of store during lateral jet assisted separation from cavity using free drop technique

Aimed at the problem of store separation from internal cavity, this paper innovatively puts forward a separation scheme of using lateral jet to assist store safe separation. The jet ensures that the store is continuously subjected to down head moment during separation, so as to ensure safe separation. The wind tunnel free drop test technique with lateral jet is established, which can ensure that there is no support interference in the motion process of the store and more truly simulate the motio...     

1种节能环保带喷射泵的排气引射器设计方案

提出了1种新式带喷射泵的排气引射器设计方案。通过计算表明，在高空模拟试验台中应用带有喷射泵的引射器，可以将湿燃气中的水蒸气冷凝分离出来，减少次流流量，降低排气温度，大幅度提高燃气总压，从而提高引射系数，并可实现无污染排放。     

固液捆绑火箭上升过程喷流干扰特性及底部热环境研究

固体喷流和液体喷流的来流与喷流之间相互干扰，在喷流交汇碰撞区域使流场温度、压力特性发生变化，对箭体底部的加热效应增强。特别是含有固体颗粒的固体助推器喷流与液体芯级喷流混合，对传热特性产生明显影响。本文用连续相模型模拟气相、离散相模型(DPM)模拟固体粒子相、DO模型模拟含有固体粒子的介质辐射，对固液捆绑火箭在上升飞行过程中的气固两相喷流的演变过程进行仿真研究。仿真结果表明:在不同的发动机组合之间出现高温区域，并随着喷流扩张和飞行高度增加，高温区向箭体底部移动，喷流中小粒径固体颗粒分布在喷流与空气的边界混合层区域，大粒径固体颗粒分布在喷流交互中心区域，底部最大对流热流密度与辐射热流密度为90 kW/m²和400 kW/m²。将仿真实验结果与飞行试验数据进行了对比分析，发现两者吻合较好，验证了仿真结果的准确性。     

低温液体火箭燃烧室内射流雾化研究进展

从理论、实验和数值计算方面，阐述和总结了低温推进剂射流雾化的研究现状和进展。对射流雾化机理及形态进行了分类，重点从对比常温流体与低温流体射流雾化特征参数不同的角度，梳理了射流雾化方面的数值研究方法，并介绍了低温射流雾化的相关实验研究。结果表明:空气扰动破碎机理仍是最广为接受的理论，而超临界工况下射流雾化形态不符合现有的射流雾化分类；数值计算方法逐渐由流体体积法和水平集法向直接数值模拟转变，对闪蒸现象的建模是研究重难点之一；低温流体射流喷雾实验数据匮乏，需通过丰富测量手段，提高测量精度的途径获得完整、准确的实验数据。      

Experimental and numerical investigation on opposing plasma synthetic jet for drag reduction

Experimental and numerical studies are carried out to validate the potential of opposing Plasma Synthetic Jet (PSJ) for drag reduction for a hemisphere. Firstly, flow field changes of opposing PSJ are analyzed by comparing the experimental schlieren images and simulation results in a supersonic free stream of Mach number 3. As PSJ is a kind of unsteady pulsed jet, the shock standoff distance increases initially and then decreases under the control of PSJ, which corresponds to the change of the strength of PSJ. Accordingly, the amount of drag reduction of the hemisphere increases initially and then decreases. It is found that there is a short period of “drag rise” during the formation of PSJ before the drag reduction, which is induced by the generation of normal shock waves and the area difference of the cavity wall of PSJ Actuator (PSJA). Secondly, the effects of five parameters, including exit diameter, discharge energy of PSJA, Mach number, static pressure of incoming flow and angle of attack, on drag reduction of opposing PSJ were studied in detail by using numerical method. It is found that the Maximum Pressure Ratio (MPR) has a significant impact on the average drag reduction for a configuration-determined PSJA. For the configuration selected in this study, the flow field of opposing PSJ shows typical Short Penetration Mode (SPM) in a control cycle of PSJ when the MPR is less than 0.89. However, the flow field shows typical Long Penetration Mode (LPM) at some time when the MPR is bigger than 0.89. Relatively better drag reduction is achieved in this case.