航空发动机高温部件系统模拟技术

对航空发动机高温部件系统模拟技术进行研究,在涡轮等高温部件及其冷却系统组成的流固系统研究中采用整体域划分思路,并对两部分组成的整体域统一求解.将该方法在某模型中进行分析验证,应用到某涡轮系统及周围冷却空气模拟中,并对强弱耦合两种耦合模拟方法的结果进行了比较分析.     

超声速高温冲击射流注水流场实验研究

为了降低发动机羽流冲击流场的温度,减弱其对发射装置的冲击和烧蚀作用,对超声速高温冲击射流的注水流场开展了实验研究。通过高速摄影和红外热像仪两种非接触式测量设备对无注水和注水两种状态下的冲击流场进行了对比拍摄,并且使用热电偶对底板冲击区的温度进行了测量。对注水两相冲击流场的结构和温度场分布进行了深入分析和研究,并与无注水状态下流场进行对比,得出了通过注水方式可以减少核心区长度和面积,降低迎气面温度,减弱其热冲击烧蚀效应的结论。     

转子叶片径向受限的“冲击-气膜出流”冷却结构流动与换热

为揭示转子叶片径向受限的"冲击-气膜出流"冷却结构流动换热规律,以某型双层壁叶片肋化分割形成的冷却单元为研究对象,通过数值模拟的方式,对冲击雷诺数Rej,旋转数Ro,无因次温比(Tw-Tf)/Tw等参数变化下流场和换热特性变化规律展开研究。结果表明:在哥氏力和离心力作用下,受限空间内存在射流偏转、径向二次流动以及二次冲击等现象;流动的径向受限可抑制射流偏转,强化冲击换热;相同的旋转数Ro下,逆转向冲击(叶背区)换热努赛尔数Nu比顺转向冲击(叶盆区)高8%。在研究的参数范围内,数值模拟和试验结果说明径向受限周向出流结构能有效的抑制旋转对换热的削弱。     

边界形状影响等离子体射流扩展特性的实验研究

为了探索燃烧室边界形状在控制燃烧稳定性方面的特性,设计了圆柱型和圆柱渐扩型充液室,运用高速录像系统研究了等离子体射流在充液室中的扩展过程。结果表明：等离子体射流在液体工质中扩展时,等离子体一液体两相流体速度差较大,TaylorHelmh01tz不稳定效应强烈,圆柱型充液室中,Taylor空腔界面自由,界面增长随机脉动性较大;渐扩型充液室能够使两相流边界受到约束,使Taylor空腔沿着充液室边界逐级扩展,从而减弱了Taylor-Helmholtz不稳定效应,有效抑制了界面增长的随机脉动性。放电电压、喷嘴直径和渐扩结构因子△D／L对Taylor空腔扩展过程均有不同程度的影响,通过对这些参数的优化匹配,可以在一定程度上实现对射流扩展过程的控制。     

横向射流起爆爆震波数值研究

采用CFD软件对横向喷射的射流在预先充满丙烷/空气恰当比混合物的爆震室中起爆爆震波的过程和机理进行了数值模拟,并讨论了射流的压力、速度以及温度对爆震波起爆特性的影响.结果表明,对于计算的物理模型,爆震射流不能在爆震室中直接起爆爆震波;射流与壁面的碰撞形成激波反射,激波反射产生的横渡、热点和局部爆震引发起爆;能够成功起爆爆震波的横向射流存在最小的射流压力,该射流压力为0.9MPa;较小的射流压力、较小的射流速度或较低的射流温度都不利于横向射流在爆震室中起爆爆震波.     

Investigation of thermal protection system by forward-facing cavity and opposing jet combinatorial configuration

 This paper focuses on the usage of the forward-facing cavity and opposing jet combinatorial configuration as the thermal protection system (TPS) for hypersonic vehicles. A hemispherecone nose-tip with the combinatorial configuration is investigated numerically in hypersonic free stream. Some numerical results are validated by experiments. The flow field parameters, aerodynamic force and surface heat flux distribution are obtained. The influence of the opposing jet stagnation pressure on cooling efficiency of the combinatorial TPS is discussed. The detailed numerical results show that the aerodynamic heating is reduced remarkably by the combinatorial system. The recirculation region plays a pivotal role for the reduction of heat flux. The larger the stagnation pressure of opposing jet is, the more the heating reduction is. This kind of combinatorial system is suitable to be the TPS for the high-speed vehicles which need long-range and long time flight.     

利用射流泵输送油水两相管流的实验研究

研究了应用射流泵输送油水两相管流时泵对下游管道中流型和压降的影响。实验管线为内径50mm的透明有机玻璃管，管线从入口到分离器长约35m，实验段由一个垂直倒U型管和一个长3m水平管组成。分别给出了不同入口条件下实验管段的流型图和压降图。结果表明：采用射流泵输送油水两相流动，对下游管道流型和油水乳化速度有着显著的影响，但对下游管道内的压降随混合流速和体积份额的变化趋势影响很小。     

应用激光相位-多普勒系统测量雾化液滴颗粒和流动特性

在几何光学近似理论的基础上分析了相位多普勒方法的理论模型和相位 粒径特性关系 ,分析了实验应用的光纤型激光相位多普勒系统的原理和组成 ,并应用此系统对雾化喷嘴的流动和颗粒特性进行了测量 ,得到了液滴的二维速度与粒径的相关和统计特性。     

Comparison of magnetic flux tube and cosmic string behavior in Kerr metric

Cosmic strings are topological defects which were generated at a transition phase of the very early Universe and are probably responsible for large-scale structure forming. However, they may pull through all history and exist in the recent epoch. Thus, they can have influence for the recent Universe interacting with different objects. We consider the cosmic string behavior in the vicinity of a spinning black hole by means of a numerical simulation. Here we present preliminary results of this work via a comparison of cosmic string and magnetic flux tube behavior in the Kerr metric. Such an approach follows from the similarity of the equations which describe these objects. Therefore, many aspects of this behavior may be comparable.     

Numerical investigation of co-flow jet airfoil with parabolic flap

Both the Active Flow Control (AFC) and the variable-camber technology are considered as efficient ways to enhance the aerodynamic performance of an aircraft. The present study investigated the feasibility of the combination of a Co-Flow Jet (CFJ) airfoil and a parabolic flap, where the Reynolds Average Navier-Stokes (RANS) equations and the Spalart-Allmaras (S-A) turbulence model were exploited for the numerical simulation. Several significant geometric parameters, including the injection slot location, the suction slot location, the injection slot angle, the suction slot angle and the airfoil Suction Surface Translation (SST), were selected to study their effects on the aerodynamics of the proposed configuration. Then, an optimized design was created and compared with the baseline airfoil. The results show that the CFJ airfoil combined with the parabolic flap is more beneficial to the aerodynamic performance enhancement at small angles of attack. It is preferable to locate the injection slot at a 2% chord-wise location and the suction slot at a 75% chord-wise location. Both the decrease of the injection slot angle and the augmentation of the suction slot angle could reduce the drag. Furthermore, the SST of 0.5% chord is selected due to its high gain in the corrected aerodynamic efficiency at small angles of attack. Compared with the baseline, the optimized design could increase the lift coefficient and the corrected lift-to-drag ratio by 32.1% and 93.8% respectively at the angle of attack α = 4°.