X-ray synchrotron nebulae and the origin of neutron stars

“With all reserve, we advance the view that a supernova represents the transition of an ordinary star into a neutron star.”This conclusion, reached just 50 years ago in a classic paper by Walter Baade and Fritz Zwicky (1934), was published three decades before the first direct observational evidence for the existence of neutron stars was uncovered. It still informs the standard picture of neutron star production in the Galaxy. We examine herein some recent evidence bearing on this question which has been derived from Observatory X-ray observations of supernova remnants and radio pulsars. In particular, the discovery that X-ray synchrotron nebulae are found surrounding most young ( 10⁶ yr) pulsars observed to date is discussed. We explore the implications of the lack of such nebulae in the majority of supernova remnants (SNR) for the properties and frequency of neutron star formation in supernova events.     

A319飞机APU启动故障可靠性调查

本文对A319飞机131-9A型APU启动不正常事件进行可靠性调查,对APU启动故障统计分析,对影响启动的部件采取如下措施:老式启动保险6KA质量差主动更换且飞机上配备6KA;启动马达-3构型降级为-2以提高寿命,后续再升级至更高寿命的-4构型;执行改装加长启动线路以降低启动电流;点火激励器软时限控制定期拆下送厂检测。通过针对性措施,有效减少了APU启动不正常事件的发生。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

一种微内核分区操作系统C库的适配验证方法

针对传统C库的开发和适配方法存在的局限性问题,提出一种基于微内核架构的嵌入式分区操作系统新C库的适配验证方法,依次对基于微内核架构的嵌入式分区操作系统之上C库的总体部署方案、初始化过程、典型功能模块的适配开发方法进行了详细阐述;搭建相应的硬件测试环境,在恩智浦公司的四种硬件平台上对开发和适配的C库进行了相应的功能测试和验证,提出了三个创新点.     

基于测控系统的质量信息监测系统设计与应用

在测控试验现场,针对测控设备状态和测控数据的质量信息,采用智能自动监测技术对设备和测控数据进行实时监视以及动态分析,提出了科学的异常判决方法和处理方案,开发了试验质量信息综合分析实时监测系统,实现了测控流程智能化管控、测控信息自动分析处理和质量信息自动化管理。在多颗卫星的跟踪验证中,质量信息监测系统对卫星长期管理的宏参数宏配置下发、标校和目标捕获与跟踪等任务过程能够进行准确监视,可以及时监测到测控数据和测控时间的异常并报警,并能够自动生成任务实施登记表等测控质量报表。实验表明,质量信息监测系统软硬件设计完善、状态监测点设置合理、判读测控事件方法有效。     

测控中的星载计算机快速切换

针对低轨卫星长期管理与测控中的星载计算机所需要的切换、维护的测控时间相对较长的问题,在分析原有主、备星载计算机的时间比对方法的基础上,直接针对备机建立新的时间同步模型,并进行公式推导和理论误差分析;然后建立新的测控事件调度模型,实现时间同步数据与主备机一致性数据的同时注入,优化工作流程,并有效缩短测控时间;最后编写新的遥控作业,在测控中进行实践.应用结果表明,采用新方法可以在一个测控圈次内完成在轨星载计算机的切换与维护,MTTR(Mean Time To Repair,平均恢复时间)小于8 min,时间同步精度优于1 ms,所需测控圈次相对于原方法减少83％以上,适用于在轨卫星长期管理与测控.     

石墨填料对浸渗热解-熔融浸渗方法制备的C/SiC复合材料结构和性能的影响

采用石墨树脂浆料浸渍三维针刺碳毡增强体,热解后得到C/C多孔体,并采用反应熔体浸渗法制备C/SiC复合材料.研究了石墨填料对C/C多孔体的结构以及C/SiC复合材料力学性能的影响.结果 表明,石墨树脂浆料浸渍时树脂填充束间小孔形成结构致密的亚结构单元,而石墨可以有效填充胎网层等大孔隙,一次浸渍热解后碳产率有效提高.所得...     

C/E复合材料网格缠绕结构三维建模与模具设计

通过对圆柱螺旋线和圆锥螺旋线参数方程的推导,实现了网格结构及模具的三维建模。三维模型的建立,可实现结构空间协调,缩短设计周期,节省研制经费,提高生产效率。在此基础上提出了可行的金属模具设计方案,找到了切实可行的模具加工方法,并在工程中加以应用,取得了较好效果。     

会议筹备的多目标规划

针对会议筹备的三个问题即预订宾馆、会议室安排、租车问题建立优化模型。对于预订宾馆问题、建立目标函数和约束条件、利用Lingo求解,将会议室安排和租车问题的各方面因素综合考虑建立模型并求解。     

航空发动机整机振动中的不平衡-不对中-碰摩耦合故障研究

针对航空发动机整机振动分析,建立了含不平衡-不对中-碰摩耦合故障的转子-滚动轴承-机匣耦合动力学模型.在耦合模型中,考虑了机匣运动,同时,充分考虑了滚动轴承间隙、非线性赫兹接触以及变柔性VC(varying compliance)等非线性因素;在耦合故障中,建立了不平衡、不对中和碰摩故障模型.运用数值积分方法获取了系统响应,研究耦合故障特征和规律.仿真计算分析表明了该模型的正确有效性.