不同进口截面下液力透平非定常压力脉动计算

为了研究不同进口截面对液力透平内压力脉动的影响,利用CFX软件对一单级液力透平进行非定常数值计算,通过设置监测点,计算各监测点在不同进口截面下的压力脉动,通过快速傅里叶变换将其压力脉动计算结果做相应分析,分析各监测点处压力脉动的时域和频域分布.结果表明:蜗壳内在大蜗壳进口下,随着蜗壳进口直径的增加,每个监测点处的压力逐渐增加,而在小蜗壳进口下,每个监测点处的压力逐渐减小.在距离蜗壳收缩管较远处,大蜗壳进口下的压力脉动较小,而在距离收缩管较近处,小蜗壳进口下的压力脉动较小.在叶轮内不同进口截面压力脉动的差异在同一时刻从进口到出口逐渐减小.尾水管内在小蜗壳进口下尾水管进口处的压力脉动最大.      

扑翼飞行器非定常气动特性研究

为了研究复杂的非定常运动状态下扑翼飞行器翅翼的气动特性,针对自行研制的一种仿鸟扑翼飞行器建立了翅翼二维非定常空气动力学模型.基于该模型,通过用MATLAB编制计算升力系数和推力系数的程序,计算并分析了各运动参数对升力和推力特性的影响.结果表明,相位差对推力系数的影响较大,而升力系数随迎角的变化较快.     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

Sensitivity analysis of flowfield modeling parameters upon the flow structure and aerodynamics of an opposing jet over a hypersonic blunt body

Implementation of an opposing jet in design of a hypersonic blunt body significantly modifies the external flowfield and yields a considerable reduction in the aerodynamic drag. This study aims to investigate the effects of flowfield modeling parameters of injection and freestream on the flow structure and aerodynamics of a blunt body with an opposing jet in hypersonic flow. Reynolds-Averaged Navier-Stokes (RANS) equations with a Shear Stress Transport (SST) turbulence model are employed to simulate the intricate jet flow interaction. Through utilizing a Non-Intrusive Polynomial Chaos (NIPC) method to construct surrogates, a functional relation is established between input modeling parameters and output flowfield and aerodynamic quantities in concern. Sobol indices in sensitivity analysis are introduced to represent the relative contribution of each parameter. It is found that variations in modeling parameters produce large variations in the flow structure and aerodynamics. The jet-to-freestream total-pressure ratio, jet Mach number, and freestream Mach number are the major contributors to variation in surface pressure, demonstrating an evident location-dependent behavior. The penetration length of injection, reattachment angle of the shear layer, and aerodynamic drag are also most sensitive to the three crucial parameters above. In comparison, the contributions of freestream temperature, freestream density, and jet total temperature are nearly negligible.     

带攻角约束的高超声速飞行器自适应反步控制器设计

针对带攻角(AOA)约束的高超声速飞行器控制问题,提出一种基于非对称时变障碍函数的非线性自适应反步控制方法。首先,将飞行器模型化为严反馈形式,以反步法为基础进行控制器设计。然后通过光滑饱和函数对名义攻角指令信号进行限幅,并保证限幅信号的可导性,限幅产生的误差通过设计辅助系统进行补偿。进而使用障碍函数对攻角指令跟踪误差进行非对称时变约束。针对不确定性和干扰,设计新型自适应律对集中干扰上界进行估计并补偿。最终通过Lyapunov理论证明了闭环系统状态量一致最终有界并且攻角始终满足时变约束。仿真结果表明,本文方法能够在满足攻角约束基础上保证良好跟踪性能。     

定子双绕组异步发电机漏电抗计算的研究

漏电抗的准确计算是电机设计中十分关键的问题。基于静止励磁调节器的双绕组异步发电机定子绕组漏抗计算比传统的三相电机更复杂。首先给出了定子双绕组异步电机通用数学模型及等效电路,采用解析法对不同绕组结构的定子双绕组异步电机漏电抗计算进行了系统地分析,导出了相应的计算公式。最后,利用所得计算公式设计了一种静止励磁调节器控制的定子双绕组异步发电机,并对其定子漏电抗参数、性能指标及运行特性进行了计算。     

飞机框肋类零件外形样板三维快速设计原理及算法

作为近年来飞机型号研制中常用的内外形控制与协调方式,飞机样板因其使用便捷、成本低廉、技术成熟等优势,在当前飞机研制中仍具有不可替代性。在当前智能化技术快速发展的数字化环境下,依赖二维图纸的样板设计技术已明显成为制约飞机研制效率和周期的重要因素,研究和开发以框肋类零件三维几何模型为基础的样板三维设计技术已成为当前航空产业的迫切需要。针对上述问题,对框肋类零件样板的一大分支--外形样板的三维快速设计原理及算法展开研究,提出钣金零件几何属性提取及外形样板三维快速设计算法,主要内容为:提出框肋类零件基础结构特征定义及提取方法,基于提取结果构建零件弯边特征并计算样板设计所需几何属性,提出外形样板轮廓计算及补加添加算法,最终实现零件外形样板三维模型生成。经由实例测试,验证此算法的可行性与有效性。     

带轴对称台阶的圆锥高超声速边界层转捩试验

在Ma 6风洞内,通过高频脉动压力测试技术和基于纳米粒子示踪的平面激光散射(NPLS)技术,分别对带前向、后向轴对称台阶的圆锥高超声速边界层转捩进行了试验研究。采用功率谱密度分析和互相关计算等方法对脉动压力数据进行分析,得到了边界层中扰动波的发展规律,定量分析了第二模态波的相关参数。结果显示：两种模型中第二模态波在沿流向向下游发展的过程中,其幅值均先增大再衰减、特征频率均逐渐减小;特征频率和传播速度整体上均随雷诺数的增大而增加(后台阶模型中特征频率由100 kHz增至196 kHz,前台阶中则由 97 kHz 增至174 kHz)、波长变化规律则与之相反(后台阶中由6.35 mm降至4.54 mm,前台阶由7.35 mm降至 4.66 mm );后台阶模型中第二模态波初次出现位置比前台阶中更靠近上游,边界层转捩位置较前台阶前移。将NPLS结果与高频脉动压力测试结果进行对比,两者吻合较好。     

谱估计理论在弹道数据参数化建模中的应用

针对高超声速飞行器防御作战中目标运动规律的描述问题,提出一种基于经典和现代谱估计理论的弹道数据参数化分析和建模方法。该方法将弹道数据视作非平稳随机信号,研究其变化规律：首先,通过线性消势法消除信号的线性趋势,将其转变为平稳信号,以便于进行谱估计;然后,采用Welch算法给出大致的谱图,结合该谱图和改进的协方差法确定自回归参数模型的阶数,以避免模型阶数选择准则引起的不确定性问题;最终,给出弹道数据的参数化模型。仿真结果表明,使用本文算法建立的弹道数据参数化模型与动力学模型具有较高的一 致性。     

Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.