电火工品在线检测装置的温度特性

介绍了工程使用中电火工品的检测电路原理图和工作原理,并在高低温状态下对电路进行了性能研究.为满足电路在较大温度范围内的性能指标,根据高低温状态下的实测值调整了电路的门限值,满足了较大温度范围内电火工品的检测.     

低压断路器灭弧室温度检测

设计了基于光纤光栅传感系统的低压断路器灭弧室温度检测装置,实验测量出灭弧室温度数据,进行了数据的有限元分析,绘制出灭弧室内温度场分布图.     

带集中热源的散热器温度场的数值分析

随着大规模集成电路的发展,电子设备的封装体积越来越小,功率却越来越大,这就使电子设备的温度日益增高,而电子设备的可靠性又与温度密切相关,良好的散热是电子设备应用中重要的一环.本文以通用的矩形翅片式散热器来对比带集中热源和带平均热源的散热器的温度差异,提出以嵌入热管的方法来解决带集中热源散热器的散热难题,并运用IcEPEK软件对其可行性进行了验证.     

陶瓷纤维梯度增强活塞的梯度方程研究

 功能梯度材料零件具有单质材料零件无法比拟的理化性能优势,然而由于材料分布复杂以及对功能梯度材料本身性能研究不充分,使性能分析存在很多困难。论文应用复合材料热性能理论,采用有限元分析软件ADINA,分析陶瓷纤维梯度增强活塞（材料梯度方程的参数不同）的温度分布和应力分布,结果表明陶瓷纤维梯度层可以明显改变活塞温度分布,缓和由于热膨胀系数不匹配,在陶瓷纤维增强层与活塞本体交界处产生的应力。根据计算结果拟合出温度峰值、整体应力峰值和层间应力峰值与方程系数之间的曲线,并加以验证。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

Revisiting the space-time gradient method: A time-clocking perspective,high order difference time discretization and comparison with the harmonic balance method

This paper revisits the Space-Time Gradient(STG) method which was developed for efficient analysis of unsteady flows due to rotor–stator interaction and presents the method from an alternative time-clocking perspective. The STG method requires reordering of blade passages according to their relative clocking positions with respect to blades of an adjacent blade row. As the space-clocking is linked to an equivalent time-clocking, the passage reordering can be performed according to the alternativ...     

热防护材料高温异型传感器校准技术研究

高温异型传感器广泛应用在热防护材料研究领域,因其测温部分比通用温度传感器尺寸短,现有的校准装置无法满足该类传感器的校准需求。针对高温异型传感器无法校准的问题,提出了一种应用专用高温恒温炉、基于比较法的校准方法,研制了高温异型传感器校准装置,实现了该类温度传感器的量值溯源,并进行了不确定度分析。     

太阳电池电路深空探测服役环境与关键技术分析

针对月球、火星、木星等不同的深空探测任务,本文通过在轨服役环境分析,说明了火星探测火星表面光谱计算方法、火星光谱太阳电池设计思路、火星表面除尘技术路线及木星探测低温低光强技术风险。结合工程技术经验,给出了特殊任务应用条件下单片太阳电池推算整板输出功率的计算方法,解决了我国尚无特殊条件的瞬态大太阳模拟器作为整板输出功率测试地面模拟光源的工程难题,为相关科研人员提供参考。     

模块化空间可展开天线支撑桁架结构的热-结构分析

对模块化空间可展开天线支撑桁架结构进行空间热交变环境下的热 结构分析,为天线结构因热致变形影响形面精度和网面稳定性提供合理的防护建议。采用ANSYS APDL有限元软件建立了大口径模块化空间可展开天线支撑结构的精细化数值模型,基于已有试验分别验证了模块化可展开天线结构有限元建模和热分析模型的正确性;分析了在瞬态温度场作用下约束位置等参数对支撑桁架弦杆及拉索应力的影响和热致变形规律。研究结果表明：空间可展开天线结构的应力和变形随时间历程发展与瞬态温度场变化趋势基本一致;同一瞬态温度场下,天线结构中心模块拉索热应力最大,同圈模块的弦杆热应力幅值基本相同,其上弦杆热应力逐圈增大,而拉索热应力逐圈减小;天线结构热致变形在距离约束最远端处整体累计值最大,上层中心点处累计热致变形可达15mm左右,对天线形面精度的影响不可忽略;将天线支撑桁架结构最外侧且距离结构中心最近的模块顶角和与相邻模块竖杆拼接处作为星载天线伸展臂约束时,天线结构的热致变形最小。将该处作为模块化空间可展开天线的展开支点,并建议对天线支撑结构表面采用涂刷隔热防护复合材料涂层等防护措施,以增加天线结构在太空极端环境的适应性,从而减小温度交变对天线整体形变和网面精度的影响。