基于CFD的高速切削层流模拟

 高速切削塑性变形的本质是位错的不可逆运动与增殖,切削时固体的黏滞力与位错速度成正比,材料的黏性效应在材料的动态力学行为中起到越来越重要的作用,因此从流体的角度去理解比从固体的方面去认识更符合其特点。本文描述了高速切削的位错阻尼机理,建立了基于流体力学的高速切削理论模型,利用计算机模拟技术得到了高速切削时的速度场、压力场和应变率场,为高速切削研究提供了新的思路。通过分析计算结果得出如下结论:在刀尖上方存在速度滞止点,此处速度为零,压力最大,其位置变化影响着刀具寿命和工件已加工表面的质量;从压力最大点开始,压力值沿前刀面逐渐减小直到某处为零,此点即切屑与前刀面分离点;剪切面(刀尖与自由表面拐角处连线)上应变率最大,然后由此向外依次减小。     

几种摇臂与联动环连接结构对比分析

为了改善航空发动机整体性能和可靠性,以航空发动机从地面起动到巡航过程为研究对象,采用热-固耦合分析方法,对涡轮转子叶尖径向运行间隙(BTRRC,Blade-tip Radial Running Clearance)进行动态分析.在分析中考虑了材料属性的非线性和温度载荷、离心载荷的动态性,分别对涡轮的叶片、盘和机匣的变形进行计算和分析,得到了涡轮叶尖径向运行间隙的变化规律,以及BTRRC最小点(可选择t=180 s)和最小值(约0.18 mm),为进行进一步涡轮叶尖径向运行间隙的动态概率分析和动态优化设计奠定了基础.     

基于动量轮转速标定的轨道控制方法研究

某地球同步三轴卫星因故障导致推力器工作效率不稳定,使得采用原有方案进行向西轨道控制时姿态变化大,控制准确度降低.针对上述问题,通过分析卫星用于姿态控制的偏置动量轮的控制规律,利用星体角动量守恒条件,建立了偏置动量轮转速变化与轨道半长轴变化之间的相关性数学模型,提出了一种改进的基于偏置动量轮转速标定的轨道控制方法,同时结合姿态的稳定变化制定了轨道控制实施方案,并将其应用于实际卫星轨道控制中,取得了良好的控制效果.改进的控制方法提高了轨道控制的准确率,使得半长轴误差幅度由最大60％提高到0.2％左右,增加了姿态的稳定性,使得俯仰姿态变化幅度由最大0.7°减小到0.2°左右,降低了控制风险,减轻了地面控制人员的负担.     

无人直升机自主飞行控制技术

分析了国内外无人直升机自主飞行控制技术的现状及差距,提出了应重点解决的关键技术,为我国无人直升机自主飞行控制技术发展提供参考.     

舰载无人直升机系统设计中几个问题的思考

针对舰载无人直升机的关键技术问题,以无人直升机着舰分析作为切入点,探讨了系统设计中发动机选择、机型设计、舰机协同控制、流场与海浪特性建模等的技术现状和实现方法,能给该领域研究、使用和管理者提供有益参考。     

Cooperative task assignment of multiple heterogeneous unmanned aerial vehicles using a modified genetic algorithm with multi-type genes

The task assignment problem of multiple heterogeneous unmanned aerial vehicles （UAVs）, concerned with cooperative decision making and control, is studied in this paper. The heterogeneous vehicles have different operational capabilities and kinematic constraints, and carry limited resources （e.g., weapons） onboard. They are designated to perform multiple consecutive tasks cooperatively on multiple ground targets. The problem becomes much more complicated because of these terms of heterogeneity. In order to tackle the challenge, we modify the former genetic algorithm with multi-type genes to stochastically search a best solution. Genes of chromo- somes are different, and they are assorted into several types according to the tasks that must be performed on targets. Different types of genes are processed specifically in the improved genetic operators including initialization, crossover, and mutation. We also present a mirror representation of vehicles to deal with the limited resource constraint. Feasible chromosomes that vehicles could perform tasks using their limited resources under the assignment are created and evolved by genetic operators. The effect of the proposed algorithm is demonstrated in numerical simulations. The results show that it effectively provides good feasible solutions and finds an optimal one.     

Springback prediction of thick-walled high-strength titanium tube bending

Significant springback occurs after tube rotary-draw-bending （RDB）, especially for a high-strength Ti-3A1-2.5V tube （HSTT） due to its high ratio of yield strength to Young＇s modulus. The combination scheme of explicit and implicit is preferred to predict the springback. This simulation strategy includes several numerical parameters, such as element type, number of elements through thickness （NEL）, element size, etc. However, the influences of these parameters on spring- back prediction accuracy are not fully understood. Thus, taking the geometrical specification 9.525 mm × 0.508 mm ofa HSTT as the objective, the effects of numerical parameters on prediction accuracy and computation efficiency of springback simulation of HSTT RDB are investigated. The simulated springback results are compared with experimental ones. The main results are： （1） solid and continuum-shell elements predict the experimental results well; （2） for C3DSR elements, NEL of at least 3 is required to obtain reliable results and a relative error of 29% can occur as NEL is varied in the range of 1-3; （3） specifying damping factor typically works well in Abaqus/Emplicit simulation of springback and the springback results are sensitive to the magnitude of damping factor. In addition, the explanations of the effect rules are given and a guideline is added.     

Reentry trajectory optimization for hypersonic vehicle satisfying complex constraints

The reentry trajectory optimization for hypersonic vehicle（HV）is a current problem of great interest.Some complex constraints,such as waypoints for reconnaissance and no-fly zones for threat avoidance,are inevitably involved in a global strike mission.Of the many direct methods,Gauss pseudospectral method（GPM）has been demonstrated as an effective tool to solve the trajectory optimization problem with typical constraints.However,a series of diffculties arises for complex constraints,such as the uncertainty of passage time for waypoints and the inaccuracy of approximate trajectory near no-fly zones.The research herein proposes a multi-phase technique based on the GPM to generate an optimal reentry trajectory for HV satisfying waypoint and nofly zone constraints.Three kinds of specifc breaks are introduced to divide the full trajectory into multiple phases.The continuity conditions are presented to ensure a smooth connection between each pair of phases.Numerical examples for reentry trajectory optimization in free-space flight and with complex constraints are used to demonstrate the proposed technique.Simulation results show the feasible application of multi-phase technique in reentry trajectory optimization with waypoint and no-fly zone constraints.     

Pseudo-automatic characterization of the morphological and kinematical properties of coronal mass ejections using a texture-based technique

The white light coronagraphs onboard SOHO (LASCO-C2 and -C3) and most recently STEREO (SECCHI -COR1 and -COR2) have detected a myriad of coronal mass ejections (CME). They are a key component of space weather and under certain conditions they can become geo-effective, hence the importance of their kinematic characterization to help predict their effects. However, there is still a lot of debate on how to define the event boundaries for space weather purposes, which in turn makes it difficult to agree on their kinematic properties. That lack of agreement is reflected in both the manual and automated CME catalogs in existence. To contribute to a more objective definition and characterization of white-light coronagraph events, Goussies et al. (2010) introduced recently the concept of “texture of the event”. Based on that property, they developed a supervised segmentation algorithm to allow the automatic tracking of dynamic events observed in the coronagraphs field of view, which is called CORonal SEgmentation Technique (CORSET). In this work, we have enhanced the capabilities of the algorithm by adding several new functionalities, namely the automatic computation of different morphological and kinematic parameters. We tested its performance on 57 well-studied limb CME events observed with the LASCO coronagraphs between 1997 and 2001, and compared the parameters obtained with those from three existent CME lists: two of them obtained from an observer-based detection and tracking method (i.e., two manual catalogs), and the other one based on the automated detection and characterization of the CME events (i.e., a fully automated catalog). We found that 51 events could be tracked and quantified in agreement with the CME definition. In general terms, the position angle, and the radial and expansion speeds are in agreement with the manual catalogs used for comparison. On the other hand, some discrepancies between CORSET and the automated catalog were found, which can be explained by the different delimitation of the CME angular extent.     

无人机航程与续航时间的实时估算方法研究

无人机的航程和续航时间是确定无人机顺利飞行任务的关键战术技术指标。针对无人机任务飞行时,影响其航程和续航时间的因素较多,根据空气动力学原理和运动学原理,探索实时估算无人机航程和续航时间的方法及应用设想。