风洞试验中风剖面的模拟及近流场特性分析

首先简单介绍了日本东京工艺大学风工程研究中心新建的开环流低速边界层风洞中风剖面模拟的试验情况.基于试验结果,采用被广泛应用的三角尖劈加上布置粗糙元的方法,成功地模拟出日本建筑学会定义的四类不同场地对应的风剖面.通过对试验数据的比较分析,就所采用的立方体粗糙元及三角尖劈对最终模拟得到的风剖面特性的影响进行了比较分析.其次,对风剖面模拟及特性判定中的几个重要问题,如三角尖劈的形状优化、风速功率谱的一致性、积分尺度的分析方法等进行了分析.最后,基于以上分析,对在边界层风洞中模拟预定的风剖面提出几点参考意见.     

角速度波动率测量的数据处理和不确定度分析

本文在对角速度波动率测量技术研究的基础上，提出了一些自己的看法，并对一些相关术语进行了定义，同时，对角速度波动率测量方法的不确定度评定进行了分析。最后，通过数据处理软件对实验数据进行了分析和验证。     

WALL INTERFERENCE CORRECTIONS FORHIGH-LIFT EXPERIMENT

ＷＡＬＬＩＮＴＥＲＦＥＲＥＮＣＥＣＯＲＲＥＣＴＩＯＮＳＦＯＲＨＩＧＨ－ＬＩＦＴＥＸＰＥＲＩＭＥＮＴＺｈａｎｇＷｅｎｈｕａ（Ｆａｃｕｌｔｙ６０３ｏｆＮａｎｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，Ｎａｎｊｉｎ...     

A320系列机型绿点速度特性分析

绿点速度是空客系列机型特有的光洁构型、一发失效条件下的最佳操纵速度。为了研究绿点速度的设计依据,利用空客PEP性能软件计算A320系列机型光洁构型、一发失效条件下、不同校正表速所对应的爬升角、等待燃油流量和飘降下滑角,分析了绿点速度状态、最大升阻比状态下的爬升、等待、飘降性能与最佳爬升/等待/飘降性能相互之间的关系。结果表明:绿点速度小于最大升阻比速度,随着飞行高度增加逐渐逼近最大升阻比速度;绿点速度下的爬升/等待/飘降性能对应于最大升阻比性能、最佳爬升/等待/飘降性能的均值。     

侧向喷流的一种直接实验模拟

研究了侧向喷流的一种直接实验模拟技术,旨在探讨喷流力直接作用在天平上时,侧向喷流对气动载荷的影响及其增益情况。本文的直接模拟是通过一种通气式应变天平实现的。研究中分析了有关模拟原则,妥善处理了诸如高压气体密封、天平变形引发的漂移、干扰等相关技术问题,并在一尖拱柱构型上实现了多种条件下的直接模拟,给出了来流条件和喷口参数条件对法向力、俯仰力矩增益因子的影响。最后,就实验结果进行了适当讨论和评述。     

高速风洞引射式进排气动力模拟试验研究

为了测定具有埋入式进气道的某航弹发动机进排气对航弹的气动影响量 ,采用引射式动力模拟器在FL 7高速风洞 ,首次在国内成功地进行了高速风洞进排气动力模拟试验。试验模型缩比为 1∶1 0 ,M =0 .7,P0j/P∞ =2 .62 ,Cφ=0 .79。试验结果表明 ,有动力后XD,CL,CD增加 ,Cma减少。试验表明在高速风洞中对于小尺寸的试验模型 ,采用引射式动力模拟器开展进排气动力模拟试验是一种简便适用的好方法     

航天材料热物理性能测试技术的发展现状

根据航天材料热物理性能测试技术的特点 ,系统介绍了国内航天材料热物理性能测试技术的发展状况和发展趋势 ,并详细介绍了目前我国航天材料热物理性能测试领域中所具备的测试技术和测试装置、航天热物理性能所涉及的研究领域和内容以及目前正在开展的研究工作。     

高空高速无人飞行器热控制系统设计

针对飞行时间短、速度和高度变化快、表面温度波动大的无人飞行器UAV(Unmanned Aerial Vehicles)热控制系统设计难题,提出了一种可解决实际工程问题的热分析计算方法.即把热天工况、冷天工况和标准天工况作为设计/试验工况;采用参考温度法、高超音速工程预测法或计算流体动力学CFD(Computational Fluid Dynamics)数值模拟法,确定了飞行器表面温度分布,并把其作为后续热分析数学模型的外边界条件;分析结构热容量对瞬态热载荷的影响,建立与之相应的边值问题方程,并采用有限差分法求解;根据高空高速飞行特点及瞬态热载荷值,确定仪器设备舱调温系统方案.     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

WSO-UV project

During last three decades, astronomers have enjoyed continuous access to the 100–300 nm ultraviolet (UV) spectral range where the resonance transitions of the most abundant atoms and ions (at temperatures between 3000 and 300 000 K) reside. This UV range is not accessible from ground-based facilities. The successful International Ultraviolet Explorer (IUE) observatory, the Russian ASTRON mission and successor instruments such as the Galaxy Evolution Explorer (GALEX) mission or the COS and STIS spectrographs on-board the Hubble Space Telescope (HST) prove the major impact of observations in the UV wavelength range in modern astronomy. Future access to space-based observatories is expected to be very limited. For the next decade, the post-HST era, the World Space Observatory – Ultraviolet (WSO–UV) will be the only 2-m class UV telescope with capabilities similar to the HST. WSO–UV will be equipped with instruments for imaging and spectroscopy and it will be a facility dedicated, full-time, to UV astronomy. In this article, we briefly outline the current status of the WSO–UV mission and the science management plan.