快变换交流方波埋弧焊电源研制

设计了一种双逆变电路结构的快变换交流方波埋弧焊电源,该电源由全桥型一次逆变电路和半桥型二次逆变电路组成.二次逆变电路由续流耦合电感、小功率电压尖峰吸收保护逆变回馈电路、IGBT半桥电路构成.一次逆变电路采用了电压、电流双闭环控制,二次逆变电路采用“临界共同导通”的控制策略,并对其电路换向过程进行了分析.试验结果表明,这种交流方波埋弧焊电源在电流换向过程中换向速度快且无过零死区时间,保证了电弧稳定性,具有良好的工程应用前景.     

Performance analysis of variable speed tail rotors with Gurney flaps

Gurney Flaps (GFs) are used for improving the performance of variable speed tail rotors. A validated analytical helicopter model able to predict the main and tail rotor power is utilized. The fixed height GF has substantially small influence on the tail rotor power in hover and low to medium speed forward flight, and can obtain significant power reduction in high speed flight. This ability can be enhanced by decreasing the tail rotor speed. With the deployment of GF, the collective pitch of the tail rotor decreases, and the maximum tail rotor thrust increases. The GF can compensate the reduction of the maximum thrust by the decrease in the tail rotor speed. The GF with a height of 5% of the chord length can almost remedy 50% of the thrust reduction introduced by decreasing 10% of the tail rotor speed. With the increase of GF height, the maximum thrust generated by the tail rotor increases. The GF with larger height can cause the increase in the tail rotor power in hover and low to medium speed flight. The retractable GF can obtain more power savings than the fixed height GF. However, the benefit is substantially small even in high speed flight. Considering the side effects introduced by the active GF, the fixed height GF may be more preferable. The mechanism for the retractable GF to generate more tail rotor thrust is to increase the lift in advancing side due to the higher dynamic pressure.     

A deformation model of flexible,HAMR objects for accurate propagation under perturbations and the self-shadowing effects

A new type of space debris in near geosynchronous orbit (GEO) was recently discovered and later identified as exhibiting unique characteristics associated with high area-to-mass ratio (HAMR) objects, such as high rotation rates and high reflection properties. Observations have shown that this debris type is very sensitive to environmental disturbances, particularly solar radiation pressure, due to the fact that its motion depends on the actual effective area, orientation of that effective area, reflection properties and the area-to-mass ratio of the object is not stable over time. Previous investigations have modelled this type of debris as rigid bodies (constant area-to-mass ratios) or discrete deformed body; however, these simplifications will lead to inaccurate long term orbital predictions. This paper proposes a simple yet reliable model of a thin, deformable membrane based on multibody dynamics. The membrane is modelled as a series of flat plates, connected through joints, representing the flexibility of the membrane itself. The mass of the membrane, albeit low, is taken into account through lump masses at the joints. The attitude and orbital motion of this flexible membrane model is then propagated near GEO to predict its orbital evolution under the perturbations of solar radiation pressure, Earth’s gravity field (J₂), third body gravitational fields (the Sun and Moon) and self-shadowing. These results are then compared to those obtained for two rigid body models (cannonball and flat rigid plate). In addition, Monte Carlo simulations of the flexible model by varying initial attitude and deformation angle (different shape) are investigated and compared with the two rigid models (cannonball and flat rigid plate) over a period of 100?days. The numerical results demonstrate that cannonball and rigid flat plate are not appropriate to capture the true dynamical evolution of these objects, at the cost of increased computational time.     

高动态下惯性加速度辅助三阶锁相环性能分析

针对高阶跟踪环路稳定性比低阶环路差,大带宽带来测量误差大的问题。研究在高动态环境下,惯导加速度信息辅助卫星接收机三阶载波锁相环跟踪算法,以及不同环路参数下跟踪环路的性能。对载体高动态场景、加速度信息延迟进行建模,并对算法进行了数学仿真。仿真分析结果表明,在加速度信息辅助下,即使压缩载波跟踪环路等效噪声带宽到3Hz,在高达1200g/s的加速度动态下,环路跟踪同样稳定可靠。     

Experimental investigation of laser peening on TiAl alloy microstructure and properties

In order to study the effect of laser peening on microstructures and properties of Ti Al alloy, Ti Al alloy samples were treated by Nd:YAG laser system with the wavelength of 1064 nm,pulse-width of 18 ns, and pulse-energy of 0–10 J. Surface micro-hardness, roughness, and microstructural characteristics were tested with micro-hardness tester, roughness tester and scanning electron microscope. Residual stress and pole figures were tested with X-ray diffraction and its high-temperature stability was analyzed. The experimental results show that surface micro-hardness increases by up to 30%, roughness increases to 0.37 lm, compressive residual stress increases to 337 MPa, and local texture and typical lamellar microstructure are generated. Residual stress, micro-hardness, and(002) pole figures tests are conducted, compressive residual stress value drops from 337 MPa to 260 MPa, hardness value drops from 377 HV_(0.2) to 343 HV_(0.2), and the(002)poles shift back to the center slightly. Laser peening improves microstructure and properties of Ti Al alloy significantly.     

A numerical optimization of high altitude testing facility for wind tunnel experiments

High altitude test facilities are required to test the high area ratio nozzles operating at the upper stages of rocket in the nozzle full flow conditions.It is typically achieved by creating the ambient pressure equal or less than the nozzle exit pressure.On average,air/GN2is used as active gas for ejector system that is stored in the high pressure cylinders.The wind tunnel facilities are used for conducting aerodynamic simulation experiments at/under various flow velocities and operating conditions.However,constructing both of these facilities require more laboratory space and expensive instruments.Because of this demerit,a novel scheme is implemented for conducting wind tunnel experiments by using the existing infrastructure available in the high altitude testing(HAT)facility.This article presents the details about the methods implemented for suitably modifying the sub-scale HAT facility to conduct wind tunnel experiments.Hence,the design of nozzle for required area ratio A/A*,realization of test section and the optimized configuration are focused in the present analysis.Specific insights into various rocket models including high thrust cryogenic engines and their holding mechanisms to conduct wind tunnel experiments in the HAT facility are analyzed.A detailed CFD analysis is done to propose this conversion without affecting the existing functional requirements of the HAT facility.     

防热试验用高温超声速燃气流场热环境分析

对用于防热系统试验考核的高温超声速燃气流场的流场结构和热环境特性进行了计算和分析.将CFD模拟方法与工程计算方法相结合,对两类锥形喷管形成的燃气流场进行了数值模拟计算和流场结构分析,并与试验过程中高速拍摄的图片进行了比对.利用模拟得到的流场气动参数,计算了沿流场轴向位置球头驻点模型的热流和压力,并与试验测量数据进行了对比,结果吻合较好.锥形喷管形成压缩波和膨胀波交替的流场结构,导致流场气动参数与模型热流和压力形成正弦变化的特点.     

轻质防热材料高焓烧蚀试验

为了得到不同轻质防热材料在高焓条件下的烧蚀数据,评估其在高焓条件下的烧蚀性能,以满足

未来高超声速飞行器再入的高焓高热流低压力的热环境,采用高焓加热器对多种不同密度的轻质防热材料进

行烧蚀考核试验。通过对试验数据和模型内部烧蚀形态的描述,给出轻质防热材料在高焓低压热环境中的烧

蚀特性。最后对比中焓条件下试验数据,详细分析焓值对轻质防热材料烧蚀性能的影响。结果显示,高焓加热

器可以产生稳定均匀的高焓低压流场,轻质防热材料在高焓条件下的隔热性能和烧蚀性能有所提高。

     

高精度A/D转换技术在惯导系统中的应用研究

针对惯导系统对模数转换电路的使用要求,明确了制约A/D转换电路在惯导系统中应用的瓶颈是零位稳定性,分析了A/D转换电路零位的影响因素,提出了解决方法。并设计出一款A/D转换电路,该电路的测试结果表明解决方法有效,可将零位提高2个数量级,与传统V/F转换电路相当。证明采用A/D转换芯片的模数转换电路能够满足惯导系统的精度要求,同时相比V/F、I/F具有高采样率和高分辨率的优势,技术指标可以满足高精度加速度测量系统等实际工程需求。     

二维振动结构的颗粒阻尼实验

采用非接触式激光测振仪对自由端附有空腔的L型悬臂梁进行了颗粒阻尼减振实验,考查了空腔尺寸对颗粒阻尼的影响规律,得到了二维颗粒阻尼的相关特性.结果表明:①非线性的颗粒阻尼能够显著地抑制结构振动,且阻尼值至少比金属材料阻尼大一个数量级;②二维颗粒阻尼在各个方向上具有相似的阻尼特性,随无量纲加速度的增加,颗粒阻尼先增大后减小...