基于FY-3C/VIRR地表温度数据的上海市热岛效应时空特征分析

城市热岛效应是当前城市生态领域关注的焦点问题之一。本文以上海为例，基于FY-3C/VIRR LST数据，通过计算研究区的热岛强度指数与热岛比例指数，定量分析上海市2019年全年城市热岛效应的时空变化特性。结果表明：上海市2019年全年各月份的总热岛区域面积均在40%以上，城市热岛效应较为显著，其中7月份总热岛区域面积最大；上海市热岛效应的空间分布呈现出“北热南冷”的格局，热岛效应主要分布在中部和北部； 上海市5—7月热带比例指数较高，为较严重热岛，随着8月份平均地表温度的继续升高，热岛比例指数有所下降。     

Experimental study on dynamic behavior of mechanically pumped two-phase loop with a novel accumulator in simulated space environment

Mechanically pumped two-phase loop (MPTL) which is a prominent two-phase heat transfer technology presents a promising prospect in thermal control for space payload. However, transient behavior of MPTL caused by phase-change and heat sources load-on/off in simulated space environment is rarely reported. In the present study, one MPTL setup was designed and constructed, and experimentally studied. Particularly, a novel two-phase thermally-controlled accumulator integrated with passive cooling measure and three capillary structures was designed as the temperature-control device. Dynamic behavior of the start-up, temperature control, and temperature adjustment were monitored; meanwhile, thermodynamic behavior within the proposed accumulator, the operating behavior as well as the heat and mass transfer behavior between the main loop and the accumulator were revealed. The results show that the fluid management function of the capillary structures for the novel accumulator is verified. The working point of the MPTL system can be adjusted by changing the temperature control point of the accumulator and it is little influenced by external heat flux and heat sources on/off. Pressure-drop oscillations which are manifested as fluctuations of temperature and pressure can be observed after phase changing due to the compressible volume within the accumulator and the negative-slope portion of the internal pressure.     

结构参数对石英纤维针刺毡防隔热和力学性能的影响

为开发具有良好防隔热和力学性能的高性能石英纤维毡,基于传热数学方程,预测了石英纤维毡的厚度对其隔热性能的影响规律;为提高纤维毡的力学性能,探究了在纤维毡中添加不同层数的石英纤维布对其力学性能的影响规律;此外还探讨了针刺密度对石英纤维毡隔热性能和力学性能的影响。结果表明：石英纤维毡传热模型与实验吻合度可达94.8%;石英纤维毡厚度提升2 mm,其隔热性能提高20 ℃左右;添加石英纤维布可以显著提高纤维毡断裂强力和撕破强力;针刺密度可以提升纤维毡力学性能,但针刺密度过大会破坏纤维毡结构,使其力学性能下降。     

复合材料气瓶热防护材料隔热性能试验研究

以复合材料气瓶热防护材料的耐高温及隔热性能为研究对象，通过真空舱模拟上面级飞行段的真空环境，采用石英灯阵模拟热源，对两种热防护方案开展真空热试验，分析了不同材料（组合）、多层隔热组件不同单元的隔热性能及其差异产生的原因。结果表明两种防热方案都可使气瓶壁面温度满足不超过70 ℃的温度要求，其中“柔性隔热毡+中温多层”组合防热结构的耐温和隔热性能更优，并通过理论计算与试验值对比验证了热仿真计算中的不确定性，试验结果可为后续型号防热设计提供参考。     

耐高温隔热材料组合结构模拟研究与试验验证

以热防护系统隔热组合结构中不同隔热材料厚度尺寸为计算变量,以飞行器主结构温度极值即最低背面温度为目标参数,以组合结构中第二层材料最高使用温度为约束条件建立隔热组合结构模型,并进行了石英灯考核验证。采用通用软件ANSYS 进行一维瞬态有限元热分析,将模型计算结果和试验结果进行了全面对比,各项数据吻合良好。     

铝蜂窝夹层板热管区域平面度控制方法研究

主要研究蜂窝板热管区域局部平面度超差的原因及控制方法。经分析,蜂窝叠块的尺寸精度以及胶膜固化后的厚度不均匀性是导致超差的主要原因,通过提高工装均压板的厚度,利用胶膜厚度的自适应性弥补零部件尺寸累积偏差,提高平面度,并对新方法下产品剥离、剪切强度进行测试,结果表明,该工艺方法可以在不影响产品力学性能的前提下大幅改善产品热管区域平面度。     

Selective thermal emission and infrared camouflage based on layered media

Infrared camouflage based on artificial thermal metasurfaces has recently attracted significant attention. By eliminating thermal radiation differences between the object and the background, it is possible to hide a given object from infrared detection. Infrared camouflage is an important element that increases the survivability of aircraft and missiles, by reducing target susceptibility to infrared guided threats. Herein, a simple and practicable design is theoretically presented based on a multilayer film for infrared stealth, with distinctive advantages of scalability, flexible fabrication, and structural simplicity. The multilayer medium consists of silicon substrate, carbon layer and zinc sulfide film, the optical properties of which are determined by transfer matrix method. By locally changing the thickness of the coating film, the spatial tunability and continuity in thermal emission are demonstrated. A continuous change of emissive power is further obtained and consequently implemented to achieve thermal camouflage functionality. In addition, other functionalities, like thermal illusion and thermal coding, are demonstrated by thickness-engineered multilayer films.     

Recent developments in thermal characteristics of surface dielectric barrier discharge plasma actuators driven by sinusoidal high-voltage power

Flow control using surface Dielectric Barrier Discharge(DBD) plasma actuators driven by a sinusoidal alternating-current power supply has gained significant attention from the aeronautic industry. The induced flow field of the plasma actuator, with the starting vortex in the wall jet,plays an important role in flow control. However, the energy consumed for producing the induced flow field is only a small fraction of the total energy utilized by the plasma actuator, and most of the total energy i...