姿/ 轨控液体火箭发动机推力室高温抗氧化涂层

概述了国内外姿/轨控液体火箭发动机高温抗氧化涂层的研究和应用进展,研制过程涉及多种材料体系,但仅有几类广泛应用于型号,包括Nb基材表面硅化物材料体系、Pt-Rh合金、Re基材表面Ir涂层。随着对发动机性能要求的提高,Re/Ir材料体系成为目前主要的研究方向。     

A simulation of Martian gravity field recovery by using a near equatorial orbiter

An improvement to the Martian gravity field may be achieved by means of future orbiting spacecraft with small eccentricity and low altitude exemplified through a newly proposed mission design that may be tested in upcoming reconnaissance of Mars. Here, the near equatorial orbital character (with an inclination approximating 10°, eccentricity as 0.01 and semi-major axis as 4000 km) is considered, and its contribution to Martian gravity field solution is analyzed by comparing it with a hypothetical polar circular orbiter. The solution models are evaluated in terms of the following viewpoints: power spectra of gravity field coefficients, correlations of low degree zonal coefficients, precise orbit determination, and error distribution of both Mars free air gravity anomaly and areoid. At the same time, the contributions of the near equatorial orbiters in low degree zonal coefficients time variations are also considered. The present results show that the near equatorial orbiter allows us to improve the accuracy of the Martian gravity field solution, decrease correlation of low degree zonal coefficients, retrieve much better time variable information of low degree zonal coefficients, improve precise orbit determination, and provide more accurate Mars free air gravity anomaly and areoid around the equatorial region.     

GEO卫星氢镍蓄电池在轨温度波动机理分析

在某地球静止轨道通信卫星平台布局的基础上,通过合理地简化和假设建立了南蓄电池舱作为热分析计算模型,对影响蓄电池在轨温度波动的机理进行分析。分析结果表明：在冬至,西板、对地+Y板和背地+Y板受照外热流的日变化会引起其内表面温度大幅度波动,通过舱内热辐射又会引起服务舱南板等结构板内表面温度波动,而服务舱南板通过导热将引起安装其上的蓄电池温度波动,这是导致蓄电池温度波动的根本原因。     

航天器相对运动的两点边界值问题解析解

针对无摄椭圆轨道,推导了表示真实相对位置速度的状态转移矩阵,进而推导出了相对运动两点边界值问题的一阶解析解。所得结果不仅可指定转移时间、还可在时间范围内进行全局的燃料优化或在时间和燃料两者间折中;对于周期和非周期的相对运动均适用。仿真结果表明此解的归一化精度达到10^－6。进一步的仿真发现相对转移过程的燃料消耗会随目标轨道偏心率的增加而增加;随长半轴的增加而减少;随初始真近点角的增加呈现周期性变化;随着转移时间增加,燃料消耗的总趋势是减少的。     

近地轨道集群航天器电磁编队飞行非线性反馈控制方法

针对近地轨道集群航天器电磁编队飞行的动力学和控制问题, 提出了一种非线性反馈控制方法. 基于电磁力模型和地磁场模型, 分析了地磁场对近地轨道电磁编队的影响; 建立了集群航天器电磁编队高精度相对轨道动力学模型; 基于Lyapunov稳定性理论设计了一种非线性反馈控制律, 利用该方法对两星电磁编队维持控制进行了仿真验证. 仿真结果表明, 地磁场引起的电磁干扰力可以忽略, 但是电磁干扰力矩的影响必须考虑; 近地轨道集群航天器电磁编队是可控的, 所设计的控制方法是可行的.      

导航卫星原子钟舱温度控制方法及其验证

原子钟是导航卫星的重要组成部分,可为卫星系统提供高准确及高稳定度的时间频率源.原子钟工作性能与环境温度变化密切相关,为保证其在轨连续、稳定运行,热控系统需为其提供良好的工作温度环境.本文以某导航卫星原子钟舱温度控制为研究内容,给出原子钟舱热控设计方案、控制算法,并进行仿真分析和试验验证.在轨遥测数据表明,卫星原子钟舱热控方案和控制算法设计合理,仿真分析及试验结果有效,各原子钟在轨工作温度满足要求,原子钟温度稳定度满足并优于设计指标近一个数量级.     

GEO卫星快速发射入轨定点控制方法

提出了一种GEO卫星快速发射入轨定点方法,运载火箭将卫星发射进入GTO轨道后,由上面级或卫星自身在48h内快速定点到GEO轨道任意指定定点位置。考虑时间、测控等约束,在选定变轨策略基础上,以燃料消耗最小为目标,优化给出了快速入轨定点标称轨迹。采用无奇异的春分点根数描述轨道运动,基于最小二乘法给出了航天器在有限推力条件下变轨的闭环显式制导方法,控制航天器沿标称轨迹飞行。仿真算例表明,采用该变轨策略、轨道优化设计方法和制导律,可以完成GEO卫星快速入轨定点控制。     

Space radiation environment in low earth orbit during influences from solar and geomagnetic events in December 2006

In low earth orbit, the SAA region is the dominant contributor to both proton environment and electron environment from the standpoint of radiation dose for spacecraft lifetime. However, the polar region and the horn region are sometimes strongly disturbed due to large solar and geomagnetic events. During large disturbances, enhancements in proton flux are measured in the polar region, which gives temporary more severe space radiation environment than that given in the SAA region. On the other hand, enhancements in electron flux are measured mainly in the horn region corresponding to the outer radiation belt, which are likely sources of high-energy electrons in the inner radiation belt. These short-term disturbances have another radiation hazard to spacecraft such as single event and electrostatic discharge.     

Precise orbit determination using the batch filter based on particle filtering with genetic resampling approach

In this study, genetic resampling (GRS) approach is utilized for precise orbit determination (POD) using the batch filter based on particle filtering (PF). Two genetic operations, which are arithmetic crossover and residual mutation, are used for GRS of the batch filter based on PF (PF batch filter). For POD, Laser-ranging Precise Orbit Determination System (LPODS) and satellite laser ranging (SLR) observations of the CHAMP satellite are used. Monte Carlo trials for POD are performed by one hundred times. The characteristics of the POD results by PF batch filter with GRS are compared with those of a PF batch filter with minimum residual resampling (MRRS). The post-fit residual, 3D error by external orbit comparison, and POD repeatability are analyzed for orbit quality assessments. The POD results are externally checked by NASA JPL’s orbits using totally different software, measurements, and techniques. For post-fit residuals and 3D errors, both MRRS and GRS give accurate estimation results whose mean root mean square (RMS) values are at a level of 5 cm and 10–13 cm, respectively. The mean radial orbit errors of both methods are at a level of 5 cm. For POD repeatability represented as the standard deviations of post-fit residuals and 3D errors by repetitive PODs, however, GRS yields 25% and 13% more robust estimation results than MRRS for post-fit residual and 3D error, respectively. This study shows that PF batch filter with GRS approach using genetic operations is superior to PF batch filter with MRRS in terms of robustness in POD with SLR observations.     

A comparison of radiation shielding effectiveness of materials for highly elliptical orbits

The Canadian Space Agency (CSA) has proposed a Polar Communications and Weather (PCW) satellite mission, in conjunction with other partners. The PCW will provide essential communications and meteorological services to the Canadian Arctic, as well as space weather observations of in situ ionizing radiation along the orbit. The CSA has identified three potential Highly Elliptical Orbits (HEOs) for a PCW satellite constellation, Molniya, Modified Tundra and Triple Apogee (TAP), each having specific merits, which would directly benefit the performance/longevity of a PCW spacecraft. Radiation shielding effectiveness of various materials was studied for the three PCW orbit options to determine the feasibility of employing materials other than conventional aluminium to achieve a specified spacecraft shielding level with weight savings over aluminium. It was found that, depending on the orbit-specific radiation environment characteristics, the benefits of using polyethylene based materials is significant enough (e.g., 22% in Molniya for PE at 50 krad TID) to merit further investigation.