Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.     

大型飞机迎角保护控制律设计及试飞技术研究

针对大型飞机迎角保护控制律设计及试飞问题,通过杆位移-过载梯度的实时精确调整及取大值逻辑指令切换,设计了迎角保护控制律,实现拉杆到底飞机迎角达到且不超过限制迎角的目的。根据迎角保护控制律的功能及试飞目的,将整个试飞过程分为三个阶段,研究了各个阶段的试飞技术。仿真结果表明,所设计的控制律能够实现迎角保护功能,具有良好的控制效果。     

三维自适应终端滑模协同制导律

针对多枚导弹协同作战的问题,且多枚导弹之间保持有向拓扑通信的条件下,基于终端滑模法设计了视线方向及视线法向的双层协同制导律。其中,视线方向的制导指令能够保证导弹同时完成拦截任务;视线法向上的三维制导律能够保证每枚导弹以期望的视线角攻击目标,从而发挥各枚导弹的最大杀伤力,并且视线角的约束相当于规划了末制导段导弹的弹道问题,在一定程度上避免攻击目标前导弹间发生碰撞。同时,针对所设计的滑模制导律设计了新的自适应律,从而加快了滑模面的收敛速度并且削弱了由符号函数引起的系统抖振现象。基于李雅普诺夫稳定性理论,证明了所设计制导律的正确性,并在最后给出了数学仿真实验,验证了所设计制导律的有效性及优越性。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

基于分数阶微积分理论的最优导引律设计

随着技术的发展及战场环境的日益复杂化,拦截机动目标的需求越来越大。然而传统制导律在拦截机动目标时存在制导精度差、末端过载突变的问题,故提出了一种基于分数阶微积分理论的最优导引律。首先,介绍了分数阶微积分的定义、性质及其数字实现方法;然后,分析了弹目相对运动关系,通过分数阶变阶次建模和最优控制理论推导出了分数阶导引律;最后,仿真结果表明：与传统比例导引法相比,所设计的分数阶最优导引律能够保持比例导引法良好的追踪性能且拦截时间能够缩短2s,末端过载值趋近于0。该方法解决了传统比例导引法在末端由视线角速率发散而导致的末端过载突变问题。     

机载超轻量化卷积神经网络加速器设计

卷积神经网络庞大的权重参数和复杂的网络层结构,使其计算复杂度过高,所需的计算资源和存储资源也随着网络层数的增加而快速增长,难以在资源和功耗有严苛要求的机载嵌入式计算系统中部署,制约了机载嵌入式计算系统朝着高智能化发展。针对资源受限的机载嵌入式计算系统对超轻量化智能计算的需求,提出一套全流程的卷积神经网络模型优化加速方法,在对算法模型进行超轻量化处理后,通过组合加速算子搭建卷积神经网络加速器,并基于FPGA开展网络模型推理过程的功能验证。结果证明：本文搭建的加速器能够显著降低硬件资源占用率,获得良好的算法加速比,对机载嵌入式智能计算系统设计具有重要意义。     

多约束条件下的制导律研究综述

随着导弹等制导武器机动能力的增强,制导精度的提高,多约束条件下的制导律研究成为精确制导研究的新热点。简要介绍了多约束条件下的制导问题,重点评述了近年来多约束条件下的制导律研究情况,对目前多约束条件下的制导律设计进行了比较详细的研究,系统分析了各种方法的优缺点,并分析了其可能的研究内容动态和方向,为精确制导技术的发展提供了参考和借鉴。     

飞行控制系统设计方法现状与发展

飞行控制系统设计是飞机设计的一项重要内容,它的先进性很大程度上决定了飞机的先进性。首先,概述了飞行控制系统及控制律的设计过程;然后,对国外先进飞机控制律设计现状进行评述。飞行控制律的设计存在两类主要的方法:经典设计方法和多种先进控制方法。着重论述了目前国内外在飞行控制系统设计中重点研究和发展的几种方法,包括最优控制、动态逆控制、鲁棒控制和智能控制等的基本原理、应用现状和工程实现问题,并指出多种方法综合控制是控制律设计的发展方向。     

矩形转圆形高超声速内收缩进气道数值及试验研究

采用压力梯度先增大后减小压升规律轴对称基准流场,结合流线追踪及截面渐变技术设计了矩形转圆形内收缩进气道模型,并采用4°斜楔模拟飞行器前体,对前体、进气道一体化模型进行了数值模拟和风洞试验,初步得到了该进气道的流场结构及总体性能.设计点和接力点的数值模拟结果表明该进气道可在马赫数Ma=4～6状态下正常工作,且具有良好的总...     

飞机俯仰角位移控制系统积分式控制规律的改进及仿真

为使飞机以足够高的准确度保持在预定飞行轨迹上,飞机俯仰角位移(9)的控制性能及稳态精度至关重要.为改进飞机俯仰角位移控制系统的控制性能,运用根轨迹法对飞机俯仰角位移控制系统的积分式控制规律进行了分析和设计,为提高(9)的稳态精度,基于SISO Design Tool设计工具,对俯仰角位移控制系统的零极点进行校正配置,实...