自适应预测补偿的迭代制导方法及其应用研究

针对迭代制导完成后入轨参数或终端程序角修正问题,研究一种基于模型参考的自适应预测补偿迭代制导算法在运载火箭上的应用。该算法在经典迭代制导算法的基础上,根据预测的迭代终端程序角和飞行视加速度的参考模型,对关机点参数进行补偿,依据补偿后的终端指标重新规划飞行轨迹,进而得出满足入轨参数或终端程序角偏差修正的制导指令,提升迭代制导对入轨参数偏差或终端程序角的修正能力。此外,阐述了经典迭代制导的基本算法,概括了自适应预测补偿迭代制导算法的基本原理,并以大推力直接入轨、终端程序角大偏差以及满足终端程序角约束为例,给出相应工况的自适应预测补偿的迭代制导算法。仿真结果表明：该算法对入轨参数和终端程序角偏差具有一定的修正能力。     

Prediction of fatigue crack growth rate for small-sized CIET specimens based on low cycle fatigue properties

Based on experiments of low cycle fatigue for 5083-H112 aluminum alloy, two energy-based predictive models have been introduced to predict the fatigue crack growth behaviors of traditional Compact Tension (CT) and small-sized C-shaped Inside Edge-notched Tension (CIET) specimens with different thicknesses and load ratios. Different values of the effective stress ratio U are employed in the theoretical fatigue crack growth models to correct the effect of crack closure. Results indicate that the two predictive models show different capacities of predicting the fatigue crack growth behaviors of CIET and CT specimens with different thicknesses and load ratios. The accuracy of predicted results of the two models is strongly affected by the method for determination of the effective stress ratio U. Finally, the energy-based Shi&Cai model with crack closure correction by means of Newman’s method is highly recommended in prediction of fatigue crack growth of CIET specimens via low cycle fatigue properties.     

并行化非结构重叠网格隐式装配技术

重叠网格技术广泛应用于复杂外形及多体分离问题的数值模拟,但是超大规模重叠网格装配的鲁棒性和效率依然是实际应用中的瓶颈。基于格心型的有限体积格式,发展了一种并行化的非结构重叠网格隐式装配技术。该技术采用节点的壁面距离作为插值边界的判断准则,并通过物理边界推进确定出活跃区域。此外,基于网格分区策略实现了隐式装配技术的并行化,为了能够适应超大规模的计算网格,在每一个网格子区内单独建立用于查询的交替数字树（ADT）数据结构,整体网格点在各个子区内进行查询,并通过信息通讯接口（MPI）传递查询结果并进行逻辑判断。该并行化的非结构重叠网格隐式装配技术具有较高的自动化程度,通过多体装配算例以及机翼外挂物分离算例,证明了该方法的实用性。     

基于拉格朗日插值法的ATS射频信号衰减修正研究

对自动测试系统中射频信号通路的衰减修正进行了研究。为解决现有修正方法操作复杂、后期维护困难的问题,提出了基于拉格朗日插值的方法来实现射频信号衰减的修正,在保证修正数据准确度的前提下既减少了修正的工作量又降低了系统后期维护的难度,并通过算例和验证了该方法的可行性。     

基于焦面哈特曼波前传感器的大视场高精度波前测量技术论证

气动光学效应容易对导引头目标成像跟踪系统产生不良影响,然而传统哈特曼波前传感器由于探测视场小,无法作用于导引头的目标成像跟踪系统。介绍了一种能够大视场测量的焦面哈特曼波前传感器,同时针对传统模式法无法在焦面哈特曼中进行高精度测量的问题,提出了一种能够高精度测量的优化波前复原算法——基于Gerchberg-Saxton迭代的波前复原算法。然后,根据满足大视场测量的结构设计,搭建了仿真平台,利用优化的波前复原算法对仿真输入像差进行复原。最后,利用多个激光器搭建了大视场波前复原实验平台,并验证了焦面哈特曼波前传感器具有能够实现高精度大视场波前测量的能力。     

模化比对直升机用红外抑制器红外辐射特性的影响

对波瓣喷管一弯曲混合管构成的直升机用红外抑制器壁面和尾焰的红外辐射特性进行了一系列的数值研究,旨在将三维流场数值计算、壁温计算与红外辐射计算结合起来综合分析抑制器红外辐射特性,与相关实验数据的对比验证表明计算结果与实验结果仅相差15%左右,且红外辐射强度空问分布规律一致;通过对不同缩比模型的数值计算,揭示了模化比对壁面及尾焰的红外辐射特性的影响规律:(1)几何相似的红外抑制器在主流入口速度、温度相同时,壁面红外辐射强度与几何模化比的2次方成正比;(2)尾焰红外辐射强度与几何模化比的2.32次方成正比.      

平板射流中大尺度涡的理论模型

根据流动稳定性理论,提出了一种解释平板射流中大尺度涡产生机理的二维不稳定波理论模型,用这种模型计算所得的流动结构和相干扰动量与实验结果吻合较好.说明不稳定波模型可以较好地描述湍流平板射流中的大尺度涡结构的主要特征.      

壁温对压缩拐角流动影响的数值模拟研究

压缩拐角是高超声速飞行器上的典型非连续区域,其分离/再附结构对局部热环境有较大影响。本文采用基于Navier-Stokes方程的自研程序,开展了典型压缩拐角外形的气动热环境数值模拟研究,分析了不同壁温条件下压缩拐角的热环境分布规律。计算结果表明:随着壁温升高,流场整体结构变化不大,但由于近壁面流体物性参数变化较大,导致拐角分离涡分离点向前移动、再附点向后移动,拐角处干扰区扩大;压缩拐角大部分区域的热流随着壁温的升高而减小,且干扰区内热流减小的幅度比无干扰区更大,但热流并不完全遵循随壁温升高而减小的规律。另外,通过对比变壁温计算热流和热壁修正公式修正热流,发现热壁修正公式在干扰区存在精度降低、适用性不足的问题。本文的研究进一步加深了壁温对压缩拐角流动影响的认识,缩小了热壁修正公式的适用范围。     

红外地球敏感器测量误差分析及修正方法

红外地球敏感器作为卫星平台重要设备，在对地指向、姿态测量和天文自主导航等方面发挥着重要作用，高精度的地球敏感器量对于提高卫星姿态控制和天文自主导航精度具有重要意义。本文通过分析地敏测量误差的影响因素，提出随季节变化的地球CO2辐射特性是影响地敏测量精度的重要因素;根据地球辐射模型构建了地敏测量修正方法，结合在轨实测数据分析验证，证明可以大大降低由地球辐射不均匀引发的误差，有效压缩地敏在轨测量误差。     

Performance assessment of RTPPP positioning with SSR corrections and PPP-AR positioning with FCB for multi-GNSS from MADOCA products

The state-space representation (SSR) product of satellite orbit and clock is one of the most essential corrections for real-time precise point positioning (RTPPP). When it comes to PPP ambiguity resolution (PPP-AR), the fractional cycle bias (FCB) matters. The Japan Aerospace Exploration Agency (JAXA) has developed a multi-GNSS (i.e., global navigation satellite system) advanced demonstration tool for orbit and clock analysis (MADOCA), providing free and precise orbit and clock products. Because of the shortage of relevant studies on performance evaluation, this paper focuses on the performance assessment of RTPPP and PPP-AR by real-time and offline MADOCA products. To begin with, the real-time MADOCA products are evaluated by comparing orbit and clock with JAXA final products, which gives an objective impression of the correction. Second, PPP tests in static and simulated kinematic mode are conducted to further verify the quality of real-time MADOCA products. Finally, the offline MADOCA products are assessed by PPP and PPP-AR comparisons. The results are as follows: (1) Orbit comparisons produced an average error of about 0.04–0.13 m for the global positioning system (GPS), 0.14–0.16 m for the global navigation satellite system (GLONASS), and 0.07–0.08 m for the quasi-zenith satellite system (QZSS). The G15 satellite had the most accurate orbit, with a difference of 0.04 m between the JAXA orbit products and MADOCA’s counterpart, while the R07 satellite had the least accurate orbit with a difference of 0.16 m. Clock products had an accuracy of 0.4–1.3 ns for GPS, 1.4–1.6 ns for GLONASS, and 0.7–0.8 ns for QZSS in general. The G15 satellite had the most accurate clock with a difference of only 0.40 ns between the JAXA clock products and MADOCA products, and the R07 satellite had the least accurate clock with a difference of 1.55 ns. The orbit and clock products for GLONASS performed worse than those of GPS and QZSS. (2) After convergence, the positioning accuracy was 3.0–8.1 cm for static PPP and 8.1–13.7 cm for kinematic PPP when using multi-GNSS observations and precise orbit and clock products. The PFRR station performed the good performance both in static and kinematic mode with an accuracy of 2.99 cm and 8.08 cm, respectively, whereas the CPNM station produced the worst static performance with an error of 8.09 cm, and the ANMG station produced the worst kinematic performance with a counterpart of 13.69 cm. (3) The PPP-AR solution was superior to the PPP solution, given that, with respect to PPP, post-processing PPP-AR improved the positioning accuracy and convergence time by 13–32 % (3–89 %) in GPS-only mode by 2–15 % (5–60 %) in GPS/QZSS mode. Thus, we conclude that the current MADOCA products can provide SSR corrections and FCB products with positioning accuracy at the decimeter or even centimeter level, which could meet the demands of the RTPPP and PPP-AR solutions.