基于对偶原理的二子样划船补偿算法

划船补偿算法一般以典型划船运动为基础,利用最优化理论来进行推导.圆锥补偿算法不仅可利用最优化理论,还可利用Goodman-Robinson理论进行推导.利用对偶原理,将Goodman-Robinson理论下得到的二子样修正圆锥补偿算法推广至划船补偿算法设计中,得到一种改进的二子样划船补偿算法.在典型划船运动条件下,对得到的划船补偿算法进行了数字仿真,并与二子样优化划船补偿算法进行了对比研究.仿真结果表明,此改进二子样划船补偿算法能提高速度更新精度.     

航天器机械臂柔性力控辅助装配方法

文章从装配的实际需求出发,提出一种航天器机械臂柔性力控辅助装配方法:通过在机械臂末端法兰与负载之间安装的六维力传感器感知作用力与力矩信息,人手直接作用于机械臂末端的负载,系统通过负载的重力补偿算法获得人手作用的力与力矩信息,而后以力/力矩信息作为输入来控制机械臂进行移动或转动,使负载柔性跟随人手运动。文章给出了装配方法的详细设计方案与相关算法,并进行了初步试验验证。试验表明,该装配方法可以有效提高在航天器狭小空间内进行大重量工件安装的效率,且安全可靠。     

角速率输入下圆锥补偿算法的一般形式

传统圆锥补偿算法直接应用于由速率陀螺组成的捷联惯导系统时,算法误差明显增大.为抑制算法误差,提出了一种以角速率为输入信号,任意子样数圆锥补偿算法(包括改进算法)的一般形式,并在典型圆锥运动条件下以算法漂移误差最小为优化准则,推导了相应的圆锥补偿系数方程和算法误差表达式.利用给出的公式,求解一个线性方程组即可得到圆锥补偿系数,可方便快捷的设计任意子样数的角速率圆锥补偿算法以及改进算法.仿真结果表明,所设计的改进算法比同子样数常规角速率圆锥补偿算法在精度上有明显提高.      

赤道地区和中纬度地区扩展F的特点和比较

通过数值模拟研究了赤道地区和中纬度地区扩展F的触发机制间的联系,发现相同的触发机制在不同纬度的条件下所演化出的结构形态不相同,因此观测上会有所不同;研究了西向电场在赤道地区的作用,发现在适合的电离层参数组合下会产生观测到的电离层F区顶部扰动出现率高于底部扰动出现率的状况;在数值模拟的基础上提出了一个中纬度地区电波散射的模型,用以解释观测到的中纬度地区电波散射的出现率高于线性理论预期的现象.      

基于二次调节原理的力矩负载模拟器中压力波动的补偿

 基于静液二次调节原理的力矩负载模拟器具有能够连续高速旋转和无多余力矩的特点。在恒压网络中,二次元件的力矩输出与其斜盘倾角成正比,即：如果系统压力出现波动,也将导致输出力矩的波动。导致系统压力变化的原因可能是油源压力脉动,但更主要是负载的变化。为了研究压力波动的影响及补偿,建立了基于静液二次调节原理的力矩负载模拟器,给出了仿真参数,并在此基础之上进行了仿真研究。为了提高力矩跟踪精度,提出利用斜盘倾角传感器和系统压力传感器来进行压力补偿,可有效地将系统压力波动对于力矩输出的影响抑制到20%左右。仿真和试验验证了此补偿方法的有效性。     

低成本捷联惯导不对称动态误差的神经网络补偿

 针对低成本捷联惯导系统(SINS)中陀螺动态误差的不对称性在角振动条件下造成姿态漂移的问题,设计了多层前向神经网络的补偿模型。在标定模型参数时,为降低对外部参考信号测量精度的要求,提出用姿态解算的最终误差作为网络优化目标的训练方法。由于最终的姿态误差不是网络的期望输出,无法采用有导师的训练方法,为此采用了微粒群优化算法。仿真实验结果表明:补偿后的陀螺动态误差的不对称度减小了一个数量级。     

航天器两自由度扫描镜图像运动补偿技术研究

研究航天器的两自由度扫描镜图像运动补偿问题。在姿态估计信息的基础上,给出了一种运动补偿算法。算法中不仅补偿了姿态估计信息,还同时考虑了姿态信息中的长周期系统误差。利用扫描镜在特定工作模式下相对惯性空间的准确定向能力和系统误差的长周期特性,给出了一种系统误差的估计和补偿算法,每隔一定的时间段对系统误差估计值进行更新并加以补偿,进一步提高了扫描精度。基于一颗地球静止轨道卫星的数值仿真结果验证了补偿算法的有效性。     

Gravity waves generated by thunderstorms: South-East Asia tropical region study

Gravity waves are recognized as an integral part of earth’s atmosphere which are mainly responsible for energy and momentum distribution among different layers and regions in the atmosphere. Various sources present in land, ocean, and atmosphere such as mountains, convection, jets and fronts etc. are responsible for gravity waves generation. Thunderstorms (deep convection) are one of the major sources of gravity waves in the tropical region, capable of generating waves with a wide range of frequencies and scales and significantly affecting the existing waves. Previous numerical studies have characterised the wave properties that are generated from thunderstorms, but there are no statistically quantified studies. In this paper, we have modelled the relationship between the latent heat generated inside a thunderstorm and the gravity wave properties at the geo-collocated points. Gravity waves are identified over Singapore radiosonde station (with data available until 30?km altitude with 12?h temporal resolution) in the stratosphere using wavelet studies. Based on the GROGRAT ray tracing methods to identify the thunderstorm locations, and RAMS cloud-resolving models simulations to obtain the latent heating of the thunderstorm, a regression analysis is performed using 200 cases of gravity waves. Furthermore, cloud-top momentum flux analysis is performed for various cases latent heat. This study is expected to provide more quantified and concrete information on the coupling between the thunderstorm and gravity wave which includes the variance in these relationships due to wave frequency spectrum and generation mechanisms.     

A wall-thickness compensation strategy for wax pattern of hollow turbine blade

As an important index affecting the aerodynamic performance and the structural strength of hollow turbine blades, the wall-thickness precision of the blade is mainly inherited from the positional relationship between the corresponding wax pattern and the internal ceramic core. However, due to locating errors, the actual position of ceramic core is always deviated from the ideal position, which makes it difficult to guarantee the wall-thickness precision of the wax pattern. To solve this problem, a wall-thickness compensation strategy is proposed in this paper. Firstly, based on the industrial computed tomography (ICT) technique and curve matching algorithms, a model reconstruction method is developed, with which the 3D model of a trial wax pattern can be easily constructed. After that, focusing on eliminating the wall-thickness errors of the trial wax pattern, an optimization method for the pose of the ceramic core in the wax pattern is proposed. Then, by mapping the optimal pose of the ceramic core to length adjustments of the locating rods, the wall-thickness errors of the wax pattern can be greatly reduced. A case study is also given to illustrate the effectiveness of the proposed compensation strategy.     

一种使用EPROM的时间增益补偿电路

本文简要介绍了医用超声波类仪器的基本原理，分析了超声波类仪器中普遍采用的Ｔ．Ｇ．Ｃ电路的不足。为克服上述电路的不足，本文提出了该电路的一种新的设计方法并在实际中实现了该方法。