基于UG的喷注器冷却通道的机床仿真加工

在分析了喷注器壳体上冷却通道的结构特点和数控加工工艺的基础上,利用UG／ISV软件进行冷却通道的辅助加工,同时对喷注器三维模型的建立、加工过程参数的选用及刀具轨迹编程和加工仿真进行了详细介绍,并用五轴机床进行了加工实验,保证了加工质量,提高了加工效率。     

星箭锁紧装置黏滞摩擦系数的影响因素研究

星箭锁紧装置是卫星与火箭连接的关键机构。装置中的V形卡块在预紧力施加过程中,易发生偏斜,使得星箭分离配合面接触不均匀,产生应力集中,导致星箭分离面黏着磨损。研究了星箭锁紧装置中的V形卡块和上下端框的铝合金摩擦副在不同影响因素下摩擦系数的变化,探究了温度、正压力以及铝合金表面粗糙度对界面黏着和黏滞摩擦系数的影响。研究结果表明,硫酸阳极化处理的2A14T6-2A14T6比较适合作为摩擦副材料,在加工和锁紧过程中,应合理控制其粗糙度、温度和正压力,以避免黏着磨损。     

基于能量法的跨声速风扇叶片气弹稳定性研究

基于能量法原理,采用弱耦合的方法对跨声速风扇叶片进行气弹稳定性分析;采用3维线性插值算法编程实现CSD/CFD数据交换。利用有限元法计算叶片的模态振型和固有振动频率;应用FLUENT动网格技术,对NASA R 67风扇叶片在不同模态振动下的非定常流场进行数值模拟,给出在前3阶模态振动下叶片表面的周期累积气动功和气动阻尼,并探讨了激波对跨声速风扇叶片气弹稳定性的影响。     

经济型月球探测器精确定点软着陆制导算法

针对未来经济型月球探测器精确定点软着陆问题,考虑发动机特性及终端状态约束,对主减速段制导算法进行了研究。首先考虑到未来月球通信网络的建立和资源的利用,提出了一种探测器在环月极轨道运行时的月面着陆点全覆盖环月调相策略。然后在北东地坐标系下建立软着陆主减速段的质心动力学模型,依据动力学模型将探测器的运动分为纵向平面运动和横向运动并分别设计在线闭环制导律。纵向平面运动采用改进显式制导算法,并基于有限推力思想和主减速段误差传播特性设计了满足终端航向位置约束的点火角修正策略;对于横向运动控制,首先基于ZEM/ZEV最优反馈制导律给出横向制导指令,然后采用PWPF将连续形式的制导指令调制为脉冲形式。仿真结果表明了该制导律能够满足所有终端状态约束,具有燃耗次优性、自主性、实时性和一定的鲁棒性,同时易于工程实现。     

C/SiC材料在模拟空天往返条件下的可重复使用性能评估

针对飞行器空天往返、多次使用的发展需求,以2D C/SiC材料为对象,选择开放大气模拟环境、800 ℃温度条件开展了常/高温拉伸试验、以及常温→高温→降温循环变化历程下拉-拉疲劳的耦合试验,得到不同的力学性能规律,分析了影响材料表面涂层完整性的控制因素及转化点。表明C/SiC材料具有优良的高温静态持续强度性能,但在常-高温循环变化历程下的疲劳性能明显衰减。采用剩余刚度衰减模型,提出了力-热-氧耦合时考虑常-高温循环历程影响因素、以及氧化尺寸效应影响的疲劳剩余性能评估方法。     

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

The thermal and dimensional stability of epoxy resin (EP) in-situ modified by cyanate ester (CE) and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy (FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40% CE makes the blending system exhibit the lowest initial decomposition temperature, which reduces by 15.5% and 40.8% compared with pure EP and CE, respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80% CE shows the lowest volume shrinkage of 6.11%. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80% CE into EP results in the lowest thermal stress in the blending system, which indicates that the system has the lowest volume shrinkage, which agrees well with the experimental results.     

卫星光通信APT控制系统H∞设计

 捕获瞄准跟踪(APT)控制系统的设计是影响整个星间光通信系统性能的重要因素。利用指向偏差的概率分布阐述了卫星光通信过程中捕获概率、跟踪误差及误码率受卫星平台振动和终端装置参数摄动的影响,通过功率谱分析了卫星平台振动在低频段、对象不确定性在高频段对指向偏差的影响,并对其进行了模型化分析。采用H_∞控制混合灵敏度设计方法同时抑制干扰和处理受控对象不确定性问题进行控制器设计。仿真验证表明该方法得到的控制器对平台干扰具有抑制力,对对象摄动具有鲁棒性。     

面向航空节点的IP/LEO卫星网络移动性管理方法(英文)

Taking into chief consideration the features of aviation nodes in satellite networks, such as high moving speed, long communication distance, and high connection frequency, this article proposes an aviation-oriented mobility management method for IP/low earth orbit （LEO） satellite networks. By introducing the concept of ground station real-time coverage area, the proposed method uses ground-station-based IP addressing method and cell paging scheme to decrease the frequency of IP binding update requests as well as the paging cost. In comparison with the paging mobile IP （P-MIP） method and the handover-independent IP mobility management method, as is verified by the mathematical analysis and simulation, the proposed method could decrease the management cost. It also possesses better ability to support the aviation nodes because it is subjected to fewer influences from increased node speeds and newly coming connection rates.     

飞机电源系统参数测试软件的通用性设计

从自动测试系统通用性的角度出发,阐述了ATS软件通用性的实现及关键技术.利用MFC在组件技术的基础上完成了飞机电源系统通用参数测试软件功能组件开发,同时结合GL Studio完成了图形控件的设计和开发.借助于LabWindows/CVI,给出了通用测试软件集成的详细说明和方法步骤.     

电沉积ZrO2/Ni纳米复合材料低温高应变速率超塑性的研究

采用电沉积方法制备了平均晶粒尺寸为45nm的ZrO2/Ni复合材料,并通过拉伸和胀形试验对该材料的超塑性能进行了研究。拉伸试验结果表明:材料在温度为420~500℃,应变速率为8.33×10-4s-1~1.67×10-2s-1时均获得了高于200%的延伸率。在温度为450℃和应变速率为1.67×10-3s-1时,得到最大延伸率605%。用扫描电镜SEM对拉伸前后试件的显微组织进行了观察,发现晶粒在温度的作用下明显长大。采用内径5 mm的凹模对ZrO2/Ni复合材料进行超塑胀形试验,在温度为420~500℃获得高径比H/d高于0.5的胀形件,说明该材料具有良好的超塑性能。