发射系下SINS/GPS/CNS组合导航系统联邦粒子滤波算法

传统的扩展卡尔曼滤波(Extended Kalman filter, EKF)算法应用于未来高超、空天飞行器的组合导航系统时,因其模型线性化展开会导致模型不准确,从而引起导航精度下降;采用蒙特卡洛方法来实现递推贝叶斯估计问题的粒子滤波(Particle filter,PF)算法能有效避免引入线性化误差,具有一定的优势。据此,针对高超、空天飞行器在发射过程中通常需要直接获得发射惯性系下的高精度导航参数的需求,提高发射惯性系下弹载组合导航系统滤波算法的精确性就尤为重要,PF滤波算法无需对非线性系统进行线性化展开即可直接实现对非线性系统的状态误差估计。为此,本文将PF滤波算法引入空天飞行器SINS/GPS/CNS多信息融合组合导航系统,设计了发射系下基于联邦滤波器的PF滤波算法,实现了对组合导航系统状态参数的直接建模估计。算法仿真结果表明,相较于发射系下SINS/GPS/CNS组合导航系统联邦EKF滤波算法,PF滤波算法有效提高了组合导航系统滤波精度。     

星机双基地SAR的工作模式研究

由于卫星速度远快于飞机,传统的条带式已不适用于星机双基地SAR。有文献提出一种"双向滑动聚束式",但该模式存在成像场景长度短、成像算法复杂等缺点。利用星机双基地SAR接收机端信噪比高的特点,提出两种新的工作模式,分别是"卫星宽波束、飞机反向滑动聚束式"和"双宽波束式"。当仅展宽飞机波束时,"双宽波束式"演变为"宽波束接收式"。从理论上分析两种工作模式的可行性,并计算得出典型参数下的技术指标。相比于"双向滑动聚束式",在方位分辨率相等的条件下,这些新模式的场景长度都明显增加。但除"宽波束接收式"外,所提两种新模式将使返回卫星的单基地回波无法使用。文末分析了几种工作模式的适用场合。     

C/C-Cu复合材料的烧蚀形貌和烧蚀机理

以PAN预氧化纤维整体毡为增强体,经碳化、等温CVI致密化后制备多孔的C/C复合材料预制体,利用气体压力浸渗法将Cu引入C/C预制体中制备C/C-Cu复合材料。采用氢氧(H2-O2)焰考核C/C-Cu复合材料的烧蚀性能,经扫描电镜和电子能谱对不同烧蚀区域的微观结构和成分进行分析,结果表明:预制体密度为0.96 g/cm3的C/C-Cu复合材料的线烧蚀率和质量烧蚀率分别为4.75μm/s、0.223 mg/s,烧蚀性能优良;其烧蚀表面具有不同的宏观形貌,在烧蚀中心区产生了明显的凹坑,主要烧蚀机制为C/C预制体的氧化和铜基体的机械冲刷;烧蚀过渡区聚集了大量的铜基体,其烧蚀机制为Cu的热氧化和机械冲刷;烧蚀边缘区材料表面变黑,主要因为C/C的氧化。为了提高C/C-Cu的烧蚀性能,需要发挥C/C预制体的"钉扎"作用,阻止Cu在高温下被气流冲刷而发生流动。     

基于代理模型全局优化的自适应参数化方法

对于翼型气动隐身设计问题,设计变量的配置对设计结果影响很大,而简单地增加设计变量不能保证得到理想的结果。提出一种适用于代理模型全局优化的自适应参数化方法：利用全局敏感性分析方法——基本效应法,得到设计空间关于目标函数的敏感区域信息,并以此为根据增加设计变量;利用节点插入算法将低维样本在高维空间内进行重构,避免了重新取样的工作量。相对于传统固定设计空间维度方法,自适应参数化方法在设计空间的敏感区域扩展维度,能够更加精准地描述外形并反映目标的变化趋势。通过飞翼布局翼型的气动隐身优化算例,证实自适应参数化方法可以大幅提高优化设计质量和效率。     

两种低噪声放大器性能对地面接收系统影响的分析

针对进口和国产低噪声放大器（ＬＮＡ）的增益和噪声温度指标，就中科院遥感卫星地面站运行接收系统的主要系统性能指标即Ｇ／Ｔ值和误码率进行了理论分析和实际测量。结果表明，国产ＬＮＡ比进口ＬＮＡ的增益提高９．８ｄＢ，噪声温度降低４Ｋ，接收系统增益改善约０．２５ｄＢ／Ｋ，１０－７误码率对应的Ｅｂ／Ｎ０改善约０．７ｄＢ。     

Validation on MERSI/FY-3A precipitable water vapor product

The precipitable water vapor is one of the most active gases in the atmosphere which strongly affects the climate. China's second-generation polar orbit meteorological satellite FY-3A equipped with a Medium Resolution Spectral Imager (MERSI) is able to detect atmospheric water vapor. In this paper, water vapor data from AERONET, radiosonde and MODIS were used to validate the accuracy of the MERSI water vapor product in the different seasons and climatic regions of East Asia. The results show that the values of MERSI water vapor product are relatively lower than that of the other instruments and its accuracy is generally lower. The mean bias (MB) was ?0.8 to ?12.7?mm, the root mean square error (RMSE) was 2.2–17.0?mm, and the mean absolute percentage error (MAPE) varied from 31.8% to 44.1%. On the spatial variation, the accuracy of MERSI water vapor product in a descending order was from North China, West China, Japan -Korea, East China, to South China, while the seasonal variation of accuracy was the best for winter, followed by spring, then in autumn and the lowest in summer. It was found that the errors of MERSI water vapor product was mainly due to the low accuracy of radiation calibration of the MERSI absorption channel, along with the inaccurate look-up table of apparent reflectance and water vapor within the water vapor retrieved algorithm. In addition, the surface reflectance, the mixed pixels of image cloud, the humidity and temperature of atmospheric vertical profile and the haze were also found to have affected the accuracy of MERSI water vapor product.     

Evaluation of geomagnetic field models using magnetometer measurements for satellite attitude determination system at low earth orbits: Case studies

In this study, different geomagnetic field models are compared in order to study the errors resulting from the representation of magnetic fields that affect the satellite attitude system. For this purpose, we used magnetometer data from two Low Earth Orbit (LEO) spacecraft and the geomagnetic models IGRF-12 (Thébault et al., 2015) and T89 (Tsyganenko, 1989) models to study the differences between the magnetic field components, strength and the angle between the predicted and observed vector magnetic fields. The comparisons were made during geomagnetically active and quiet days to see the effects of the geomagnetic storms and sub-storms on the predicted and observed magnetic fields and angles. The angles, in turn, are used to estimate the spacecraft attitude and hence, the differences between model and observations as well as between two models become important to determine and reduce the errors associated with the models under different space environment conditions. We show that the models differ from the observations even during the geomagnetically quiet times but the associated errors during the geomagnetically active times increase. We find that the T89 model gives closer predictions to the observations, especially during active times and the errors are smaller compared to the IGRF-12 model. The magnitude of the error in the angle under both environmental conditions was found to be less than 1°. For the first time, the geomagnetic models were used to address the effects of the near Earth space environment on the satellite attitude.     

当量油气比对内燃波转子燃烧特性的影响

为了研究当量油气比对内燃波转子燃烧特性的影响规律,采用控制变量法,保持内燃波转子转速、混气填充速度不变,通过调节燃料喷射体积流量改变混气的当量油气比。在不同的当量油气比下开展内燃波转子燃烧特性试验。试验结果表明:当量油气比对于内燃波转子燃烧过程影响很大,随着当量油气比的增加,内燃波转子获得的燃烧压力增益增大,在内燃波转子转速为900r/min、混气填充速度为6.741m/s、当量油气比为1.442时,6个工作循环内平均燃烧压力增益达到246.29％,火焰平均传播速度随当量油气比呈类似正态分布,在化学恰当比附近达到最大10.8m/s。当量油气比小于1时,两组工况下火焰锋面呈向下倾斜状传播,当量油气比大于1时,两组工况下火焰锋面呈向上倾斜状传播。      

汽雾两相流强化冷却燃气轮机叶片内冷通道

实验研究了方形通道这一重型燃气轮机中常用叶片强制对流冷却通道结构.分析了雷诺数、壁面热流密度以及水雾质量流量比等关键参数对汽雾冷却通道的传热特性的影响,并建立了考虑离散相水雾的流动工况和通道壁面加热条件的实验关联式.结果表明:相对于纯蒸汽,汽雾两相流的传热系数显著提高,且传热性能提高的幅度随热流密度的增大而减小,随雷诺数和水雾质量流量比的增大而增大;通道上壁面平均传热系数低于下壁面,在高热流密度和低水雾质量流量比下,两者相差约13%,而在低热流密度与高水雾质量流量比的情况下,该比值增加到约25%.      

一种基于有限K近邻的强度帕累托进化算法

在航天器控制计算机的软硬件协同设计过程中,需要解决多目标优化问题。当前的强度帕累托进化算法在求解高维多目标优化问题时具有优势,但是在环境选择阶段的计算时间复杂度仍然较大。文章针对这一问题,提出了一种改进算法。新的算法采用有限K近邻方法,减少了原算法中K近邻策略的比较次数,使时间复杂度由O(M3)下降为O(max(l,logM)M2。试验结果表明文中算法的计算速度更快,并且具有更优的收敛性和分布多样性特征。