含边界和损伤因素的纺织复合材料细观胞元模型

纺织复合材料的细观力学分析通常以胞元模型为基础,胞元边界条件的合理施加是获得精确分析结果的关键之一。本文以平面机织复合材料为例,讨论了细观胞元的选取和周期边界条件的施加方法,在此基础上建立了二维细观有限元模型,通过与全厚度模型分析结果的比较,研究了周期胞元模型的合理性,特别是边界效应和局部损伤等非周期因素对分析结果的影响,给出了这些因素下胞元边界条件的处理方法。     

非定常Hele-Shaw流中Darcy定理的实验研究

对表面水波在H—S槽中的传播进行了实验研究和理论分析．通过对水波的复波数的测量验证Darcy定理在非定常H—S流中的适用性。研究表明，水面波在H—S槽中的传播．具有较强的衰减现象。同时．其复波数的实部与Darcy理论预测吻合．而其虚部与理论预测相差甚远。表明在非定常情况下，Darcy定理有局限性，有必要进一步研究。     

8m×6m风洞新型高精度外式天平研制

介绍了为8m×6m风洞研制的一台新型外式天平的用途、测量能力、测量原理和一些新的设计思想。静态校准结果表明：该天平全部达到了设计要求，精密度和准确度都达到了较高的水平，可以满足多种型号试验和研究的需要。     

航空用燃料电池及混合电推进系统发展综述

随着世界范围内碳减排需求的日益增长及长航时飞机的发展需要,高效率的燃料电池航空电推进系统逐渐受到重视,氢能航空的理念被人们所熟知。可使用碳氢燃料的高温燃料电池还可与燃气涡轮组成混合动力系统,发电效率进一步提高至70%。本文首先回顾了燃料电池及燃料电池涡轮混合系统在航空能源、动力系统方向应用概况;接着,概述了几种突破现有涡轮发动机技术瓶颈的新概念混合电推进系统,如发电与推进一体化燃料电池涡轮混合动力系统和无涡轮燃料电池混合推进系统;基于此,本文分析了限制燃料电池混合系统实际应用的关键技术难题,主要体现在混合动力系统功重比较低、大分子碳氢燃料重整技术未突破两方面。     

Convex optimisation approach to constrained fuel optimal control of spacecraft in close relative motion

This paper describes an interesting and powerful approach to the constrained fuel-optimal control of spacecraft in close relative motion. The proposed approach is well suited for problems under linear dynamic equations, therefore perfectly fitting to the case of spacecraft flying in close relative motion. If the solution of the optimisation is approximated as a polynomial with respect to the time variable, then the problem can be approached with a technique developed in the control engineering community, known as “Sum Of Squares” (SOS), and the constraints can be reduced to bounds on the polynomials. Such a technique allows rewriting polynomial bounding problems in the form of convex optimisation problems, at the cost of a certain amount of conservatism. The principles of the techniques are explained and some application related to spacecraft flying in close relative motion are shown.     

Efficiency optimized fuel supply strategy of aircraft engine based on air-fuel ratio control

Accurate fuel injection control of aircraft engine can optimize the energy efficiency of UAV power system while meeting the propeller speed requirement. Traditional injection control method such as open-loop calibration causes instability of fuel supply which brings the risk of power loss of UAV. Considering that the closed-loop control of AFR can ensure a stable fuel feeding, this paper proposes an AFR control based fuel supply strategy in order to improve the efficiency of fuel-powered UAV while obtaining the required engine speed. According to the optimum fuel injection results, we implement fuzzy-PID method to control the set AFR in different situations. Through simulation and experiment studies, the results indicate that, to begin with, the calibrated mathematical model of the aircraft engine is effective. Next, this fuel supply strategy based on AFR control can normally realize the engine speed regulation, and the applied control algorithm can eliminate the overshoot of AFR throughout all the working progress. What is more,the fuel supply strategy can averagely shorten the response time of the engine speed by about two seconds. In addition, compared with the open-loop calibration, in this work the power efficiency is improved by 9% to 33%. Last but not the least, the endurance can be improved by 30 min with a normal engine speed. This paper can be a reference for the optimization of UAV aircraft engine.     

LaBr3(Ce)元件破损在线监测关键核素确定及效率校准

常用的元件破损在线监测方法受外在因素影响较大，以γ能谱中关键裂变产物核素比活度进行在线定量分析是一种可靠的元件破损监测方法。针对新型LaBr₃(Ce)元件破损监测仪，设计了元件破损模拟实验，对逸出的裂变产物采用HPGe和LaBr₃(Ce)探测器进行了对比测量。通过不同冷却时间γ能谱的核素分析，确定了¹³⁵Xe，⁸⁸Kr，¹³⁸Xe，⁸⁸Rb，¹³⁸Cs等可作为LaBr₃(Ce)元件破损γ能谱监测的关键核素。同时，制备了覆盖能量范围(250～2 400)keV，含⁶⁰Co，¹³⁷Cs，¹³³Ba；²⁴¹Am，¹⁵²Eu；¹⁰⁹Cd，⁸⁸Y，⁵⁷Co及²⁴Na的4组放射性标准溶液，在建立的效率校准系统上，校准了LaBr₃(Ce)在线监测仪的效率。在反应堆一次异常情况分析中，已校准的LaBr₃(Ce)元件破损监测仪对关键核素的现场分析结果与HPGe的取样分析结果一致，表明效率校准结果准确，校准方法可靠。     

植物细胞响应重力变化的Ca2+信号

重力大小的改变(微重力和超重力)可以对植物的生长发育、生理生化特性、细胞超微结构、基因和蛋白的表达等产生广泛的影响,而Ca~(2+)可能在此过程中起信号物质的作用.重力刺激在植物细胞中引发事件的顺序可能是:重力刺激的感受—细胞膜系统张力改变—膜理化特性改变—膜透性、离子转运、膜连接酶活性等改变—Ca~(2+)信号的产生和转导—新陈代谢变化—生理反应.植物对重力水平变化应激响应的至关重要一步是引起细胞内Ca~(2+)分布区域和浓度的变化,这是将细胞外重力刺激转换为细胞内化学信号的关键步骤.由于机械力敏感的C~(2+)通道的活化和Ca~(2+)-ATPase酶活性受到抑制,重力改变时细胞质中自由Ca~(2+)浓度增加,随后Ca~(2+)作为第二信使介导相关酶活性发生改变,最终引起一连串的生理生化反应.本文探讨了重力变化对植物细胞质内自由Ca~(2+)浓度的影响、Ca~(2+)信号的产生机制.以及Ca~(2+)作为次级信号对细胞生理生化过程调节作用的途径和机制,介绍了常用的Ca~(2+)研究方法,并分析了研究的关键点和难点.     

Experimental comparison between aircraft fuel tank inerting processes using NEA and MIG

Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generation System (GOBIGGS) is a novel technology based on flameless catalytic combustion, and owning to its simple structure and high inerting efficiency, it has received a lot of attentions. The inert gas in the GOBIGGS is mainly comprised of CO₂, N₂, and O₂ (hereinafter, Mixed Inert Gas (MIG)), while that in the On-Board Inert Gas Generation System (OBIGGS), which is one of the most widely used fuel tank inerting technologies, is Nitrogen-Enriched Air (NEA). The solubility of CO₂ is nearly 20 times higher than that of N₂ in jet fuels, so the inerting capability and performance are definitely disparate if the inert gas is selected as NEA or MIG. An inerting test bench was constructed to compare the inerting capabilities between NEA and MIG. Experimental results reveal that, if ullage washing is adopted, the variations of oxygen concentrations on the ullage and in the fuel are nearly identical no matter the inert gas is NEA or MIG. However, the ullage and dissolved oxygen concentrations of MIG scrubbing are always higher than those of NEA scrubbing.     

用于电场探头校准的一种新设备——吉赫横电磁波传输室(GTEM小室)

介绍了近年来在电磁兼容性测量及场强测量领域已经广泛应用的吉赫横电磁波传输室（GTEM小室）。提出了将其用于校准电场探头的条件和方法。