SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.     

空间交会中脉冲变轨燃料消耗研究

导出了空间交会中多脉冲变轨的一般算法。在此基础上,重点研究了双脉冲变轨的燃料消耗情况,提出了双脉冲变轨条件下的“不可达点”及其附近的“高耗能区域”,并给出了相应的物理解释。最后对多脉冲变轨与双脉冲变轨进行了比较。     

载人航天器的发射窗口及太阳能帆板的最佳受晒

首先根据载人航天器轨道运行段的基本特征,利用球面三角公式推导了：①阳光方向与载人航天器太阳能帆板法向的最佳夹角公式;②圆轨道的受晒因子公式。然后根据理论分析,引入帆板的效率系数。最后借助于计算机代数ｍａｔｈｅｍａｔｉｃａ系统,建立了一种分析帆板最佳受晒的直观、清晰、简便的方法。所得的结论为确定载人航天器的发射窗口提供了依据。     

Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine

The heavy fuel compression ignition engines are widely equipped as aircraft piston engines. The fuel injection system is one of the key technologies that determines the performance of engine. One of the main challenges is to precisely control the injected fuel quantity and flow rate in the presence of pressure fluctuation. This challenge is even more serious for heavy fuel. An original design for electrically controlled high pressure fuel injection system called Multi-Pumppressure-reservoirs fuel injection System(MPS) was demonstrated to reduce the pressure fluctuation and help keep injection stable. MPS was compared with an ordinary high pressure Common Rail fuel injection System(CRS). This work established one-dimensional AMESim and mathematical models for both CRS and MPS to study the effect of different structures and geometric parameters on the pressure fluctuations. The calculations show that the average fuel pressure fluctuation of MPS can be reduced by 57% for the crankshaft speed of 1900 r/min, and the pressure fluctuation before injection reduced by 100%. It is concluded that the pressure performance of MPS is less sensitive to pressure reservoir volume than that of CRS, and there is an opportunity for further volume reduction.     

三结太阳电池高能电子损伤模拟及仿真分析

利用wx AMPS软件构建了高效Ga In P/Ga As/Ge太阳电池的中电池模型,并对电池抗辐照性能进行模拟研究。模拟发现,当辐照缺陷密度较小时,缺陷对中电池的电性能影响较小;当缺陷密度较大时,电性能的下降与电子注量值的对数成正比。计算电池的I-V和量子效率谱(QE曲线)可知,电池电性能的下降直接对应于量子效率的下降、饱和暗电流的增强以及并联电阻的衰降。模拟结果与试验结果的对比显示,在各子电池均匀损伤的假定下,1 Me V电子辐照的缺陷引入率约为0.81。     

Experimental study of a flush wall scramjet combustor equipped with strut/wall fuel injection

In this study a flush wall scramjet combustor is tested in a supersonic incoming air flow with the Mach number of 3 which is generated by an air vitiation heater producing the stagnation temperature of 1505 K. Using liquid kerosene as the fuel, the flame is stabilized by means of a centrally mounted O₂ pilot strut after being ignited by a plasma torch. During experimental measurements, the fuel is injected with a constant equivalence ratio of 0.8 according to specified strut/wall injection ratios, i.e., a portion of the fuel amount is injected from the strut while the rest is injected from the wall. The strut and wall injectors are arranged at the same axial position. The combustion performance and wall temperature gradients are evaluated with various fuel feeding ratios between the wall and the strut. Experimental results show, when the equivalence ratio is constant and the axial injection position is fixed, the combustion characteristics vary significantly with the strut/wall fuel feeding ratio, especially when this ratio is close to its lowest and highest limits. Among the four fuel feeding ratios examined, the strut only injection mode and the average distributed strut/wall injection mode show the best combustion performance. However, the strut/wall injection mode produces a smaller wall temperature gradient compared to the strut only injection mode, which is due to the significant film cooling effect caused by the wall injected liquid kerosene.     

基于伴飞模式的补给星轨道设计与优化

针对采用伴飞模式的星座燃料补给问题,本文对其补给星的轨道进行了设计与优化。在给出补给星的轨道设计之后,利用遗传算法对补给星轨道机动所消耗的燃料质量以及每次转移给工作星的燃料质量进行了优化求解,使得补给星燃料利用率达到最高。仿真结果同时给出了燃料利用率与工作星轨道高度以及星座中卫星数目之间的关系,该结论对采用伴飞模式的星座燃料补给研究提供了较好的理论参考。     

航天器推力器布设对燃料消耗的影响

对航天器六自由度控制的推力分配问题进行了研究,参考卫星导航系统中几何精度衰减因子(GDOP) 的定义,首次提出了推力器构型燃料消耗因子（FCF）的概念,并将此概念用于定义推力器相对几何关系引起的期望控制量与燃料消耗间的比例关系。通过矩阵理论分析得到了燃料消耗因子随推力器数目增加而减少的结论,并通过仿真计算对结论进行了验证。     

搅拌摩擦焊接头隧道类缺陷等强补焊工艺

针对搅拌摩擦焊接头隧道类缺陷等强补焊的应用要求,开发了基于TIG焊熔补材料、搅拌摩擦焊增强组织性能的等强补焊工艺,对补焊后的接头进行了微观组织观察与力学性能分析,评价了补焊工艺对接头性能的影响.结果表明,对焊缝同一位置进行不大于三次的重复搅拌摩擦焊,接头力学性能不会明显下降;TIG熔补焊缝经再次搅拌摩擦焊后,其焊缝组织与搅拌摩擦焊焊缝组织特征相似,不会导致接头组织恶化.采用本文开发的等强补焊工艺对某型号火箭液氧贮箱纵缝的隧道缺陷进行了等强补焊,表明该方法有效可行.     

激光辐照条件下光电电池温度特性的实验研究

激光输能具有广阔应用前景,而光电电池是激光输能技术中实现光-电转换的核心部件。文章围绕温度对光电电池输出性能的影响,通过建立电池输出性能实验测试系统,研究了一定激光功率密度下砷化镓电池和硅电池在不同温度下的伏安特性,以及开路电压、短路电流、最大输出功率、匹配负载、转换效率、填充因子随电池温度的变化规律,并给出其定量表达式,可为激光输能条件下光电电池的选择以及光电电池温度特性预测提供参考。