指令抗干扰性能研究

本文从分析指令的特性出发,研究了指令在外界干扰作用下的特性,提出了单故障相关指令对的概念,分析了单故障相关指令对的性质,提出了单故障相关指令集生成算法,讨论了不同类型指令在单故障情况下的效应,并作了初步分类,最后提供了部分故障试验结果。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

GaInP2外延膜中施主—受主对复合发光带的能量关量

通过变温与变激发强度的近红外光致发光研究了用ＭＯＣＶＤ方法、生长在ＧａＡｓ衬底上的Ｇａ０．５Ｉｎ０．５Ｐ（ＧａＩｎＰ２）外延薄膜的１．１７ｅＶ发射带的发光特性。１．１７ｅＶ发光带性质与０．９９ｅＶ及０．８５ｅＶ发光带的性质有着明显的差别。１．１７ｅＶ发光带的机理可用施主－受主对的复合发光来解释，其中施主－受主对系白处在Ｇａ格位上的Ｓｉ（ＳｉＧａ）及其最邻近的Ｇａ空位（ＶＧａ）所组成，记作ＳｉＧａ－ＶＧａ。考虑到ＧａＩｎＰ２中存在着很强的电子－格子耦合作用及其Ⅲ族子格子为部分有序，所以在施主－受主对复合发光中应计及Ｆｒａｎｃｋ－Ｃｏｎｄｏｎ位移△ＦＣ及该对在等效的部分有序势场中的相互作用能Ｅｓ（ＤＡＰ）。Ｘ—射线衍射实验表明，部分有序结构相当于成分调制，因而可用Ｋｒｏｎｉｇ－Ｐｅｎｎｅｙ模型来计算Ｅｓ（ＤＡＰ）值。这样，我们就导出了施主－受主对复合发光的新的能量表示式。     

摩擦焊设备振动油缸的性能分析

液压式摩擦焊设备是将电液伺服控制技术运用到摩擦焊接领域的一种先进设备。通过分析系统振动油缸的频率,找出影响频率的关键因素,深入分析这些因素对振动油缸伺服控制系统的影响,并利用AMESim仿真软件对该系统进行建模分析,验证了分析结果,并总结出改进系统的几点措施,为摩擦焊设备的设计改进提供了理论依据。。     

Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

大功率狭缝式活塞激励器流场测量与分析

研制了一种大功率活塞射流激励器,出口瞬时速度峰值可达0.3Hz,通过对活塞激励器射流流场测量,得到激励器出口流场速度、涡量分布,分析得到激励器合成射流流动结构与特征,通过采用活塞激励器控制同轴射流掺混,实验结果证明此种活塞激励器可以用于相对较高的速度流场的主动流动控制.利用提出的设计方法设计合成射流激励器可以在激励器出口形成稳定的对涡结构,采用一定的激励频率即可对喷管气流掺混进行有效控制.研究表明,合成射流激励器作为主动流动的执行机构,在航空动力排气系统具有潜在的重要价值.     

月面钻取采样回转齿轮副啮合生热试验研究

针对月面钻取采样装置的回转齿轮副啮合热进行理论分析,依据辐射换热定律建立了理论温升模型;模拟实际月面真空、带载工况并开展试验研究。分析了啮合热在月面高真空环境的制约条件下,向机体外传播的方式、传热途径以及散发不畅时的积聚作用对附近运动副工作特性的影响。研究结果表明：回转齿轮副作为钻具驱动单元动力传递的中间环节,在20Nm负载转矩工况下持续运行40分钟,理论预测最大温升28.66℃,与试验测量的最大温升结果28℃相吻合,充分验证了钻进驱动单元热设计的正确性,准确地识别出回转齿轮副啮合热积聚的潜在风险。     

一种铍合金材料的结构和性能

对国外某型号飞机所用的铍合金刹车材料进行了密度测试、结构观察、化学元素分析、力学、物理和摩擦性能表征,并与C/C、C/SiC复合材料和粉末冶金材料的相关性能作了对比,结果表明,粉末冶金铍合金材料密度低,力学和摩擦性能优异,是一种很有发展前途的刹车材料.     

地面模拟微重力条件下Cu-Pb合金的制备及微观结构与摩擦性能研究

利用地面上建立的微重力电磁模拟设备成功制备出了Cu-Pb二元难混合金,并对其微观组织结构与摩擦性能进行了分析与测试。样品SEM分析结果表明,模拟微重力状态下制备的合金样品较好地克服了地面上因重力影响而产生的严重成分偏析,少数弥散相较均匀地分布于基体中,少数相含量越低,弥散体尺寸越小,分布越均匀;摩擦性能测试结果显示合金模拟样品的摩擦性能明显好于基体金属,且摩擦系数随少数相Pb的含量的增大而减小,体积磨损率随少数相含量的增大先快速减小而后又缓慢增大。同时对实验结果进行了简单的分析与讨论。      

Detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target

The rotational motion of a tumbling target brings great challenges to space robot on successfully capturing the tumbling target. Therefore, it is necessary to reduce the target’s rotation to a rate at which capture can be accomplished by the space robot. In this paper, a detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target is proposed. This strategy can reduce the target’s rotational velocity while maintaining base attitude stability through the establishment of the rotation attenuation controller and base attitude adjustment controller. The rotation attenuation controller adopts the multi-space hybrid impedance control method to control the friction precisely. The base attitude adjustment controller applies the dual-arm extended Jacobian matrix to stabilize the base attitude. The main contributions of this paper are as follows: (1) The compliant control method is adopted to achieve a precise friction control, which can reduce the target angular velocity steadily; (2) The dual-arm extended Jacobian matrix is applied to stabilize the base attitude without affecting the target capture task; (3) The detumbling strategy of dual-arm space robot is designed considering base attitude stabilization, realizing coordinated planning of the base attitude and the arms. The strategy is verified by a dual-arm space robot with two 7-DOF (degrees of freedom) arms. Simulation results show that, target with a rotation velocity of 20 (°)/s can be effectively controlled to stop within 30 s, and the final deflection of the base attitude is less than 0.15° without affecting the target capture task, verifying the correctness and effectiveness of the strategy. Except to the tumbling target capture task, the control strategy can also be applied to other typical on-orbit operation tasks such as space debris removal and spacecraft maintenance.