A novel virtual material layer model for predicting natural frequencies of composite bolted joints

A novel virtual material layer model based on the fractal theory was proposed to predict the natural frequencies of carbon fiber reinforced plastic composite bolted joints. Rough contact surfaces of composite bolted joints are modeled with this new proposed approach. Numerical and experimental modal analyses were conducted to validate the effectiveness of the proposed model. A good consistence is noted between the numerical and experimental results. To demonstrate the necessity of accurately modeling the rough contact surfaces in the prediction of natural frequencies, virtual material layer model was compared with the widely used traditional model based on the Master-Slave contact algorithm and experiments, respectively. Results show that the proposed model has a better agreement with experiments than the widely used traditional model (the prediction accuracy is raised by 8.77% when the pre-tightening torque is 0.5 N∙m). Real contact area ratio A* of three different virtual material layers were calculated. Value of A* were discussed with dimensionless load P*, fractal dimension D and fractal roughness G. This work provides a new efficient way for accurately modeling the rough contact surfaces and predicting the natural frequencies of composite bolted joints, which can be used to help engineers in the dynamic design of composite materials.     

复合材料桁架式发动机支架改型设计分析

采用DFH-3改进型平台的卫星变轨发动机支架直接安装在承力筒下锥段的内壁,要求在正弦振动载荷条件下,变轨发动机安装法兰面的最大加速度响应(5Hz~100Hz范围内)不得超过3g。针对上述条件,本文对DFH-3改进型平台变轨发动机支架直接继承现有产品的可行性进行了分析,并对几种可能的设计变更方式进行了分析,最终得到了对变轨发动机支架结构进行加强的优选方案。     

直升机吊挂控制系统飞行品质分析

基于直升机指令模型、PID控制和动态逆控制理论,建立了三种直升机吊挂耦合系统控制模型以研究吊挂对直升机飞行品质的影响.依据军用旋翼飞行器飞行品质规范(ADS-33E)和直升机带吊挂飞行的飞行品质要求,对各控制模型进行了仿真和频域分析,并研究了吊挂质量和吊索长度对系统飞行品质的影响.结果表明:引入吊挂摆角状态反馈可提高系...     

强海杂波背景下目标检测方法综述

高频地波雷达被广泛应用于海面目标的检测,而由于海杂波的分布散射具有很强的动态特性,通常情况下成为了海面目标检测的主要干扰成分。因此,在强海杂波背景下进行目标检测的关键在于如何有效抑制海杂波。从循环对消、子空间分解、模型预测以及分形特征这几方面对海杂波抑制技术进行综述、分析和总结,为后续对海面目标检测提供参考。     

基于双镜反射法的亚角秒级小角度测量

针对工程应用中对静态或低频动态微小角度的高精度测量需求，基于双平面镜多次反射增大光线反射角的方法构建了一种二维偏转角度测量装置。分析了双镜反射法的计算原理，提出了一种评价测角不确定度的方法，进行了光路仿真和实测数据的比对，结果表明：利用该方法的测角装置可实现优于0.1″的测角精度，且测量结果稳定可靠，适用于静态或低频动态微小角度的精确测量。     

A comprehensive statistical study of cloud base height using ceilometer over western India

A comprehensive statistical analysis of the cloud base height (CBH) measured by ground-based Vaisala ceilometer (CL31) has been performed to study different layers of the cloud in the lower troposphere up to 7.5?km height over Ahmedabad, western India during 2014 and 2015. The total observations (～69%) of cloud by using ceilometer show annual cloud occurrence frequency of around 64%. Seasonal variation of CBH and cloud occurrence frequency reveal that the maximum/minimum cloud cover is found during southwest (SW) Indian summer monsoon/pre-monsoon season. Three CBHs (CBH1, CBH2, and CBH3) are presented in monsoon period due to high cloud occurrence, and two CBHs (CBH1 and CBH2) are observed in other seasons due to low cloud occurrence by ceilometer over the observational site. The CBH1 (～100–2000?m) and CBH2 (500–3000?m) are observed during SW monsoon and summer season, respectively. The CBH3 is occurred usually in SW monsoon season. Moreover, the cloud cover during the day and night time shows that the occurrence of cloud is more frequent in daytime than nighttime during pre-monsoon and post-monsoon season. The statistical analysis of cloud with ground-based observations is also performed in this study that may be useful for the development/improvement of regional weather and climate models to reduce the uncertainty in the prediction.     

中继卫星系统仿真软件设计与应用*

设计开发中继卫星系统仿真软件,并针对理想信道条件、I/Q幅相不平衡、幅频特性、群时延、相位噪声、功放饱和条件、非线性信道条件这七种信道,仿真16QAM和16APSK的误码率性能,并对仿真结果进行分析。利用仿真平台得出的非线性信道条件下误码率需求与所需信噪比之间的关系,可以作为完善系统技术指标的重要依据,为中继卫星系统后续建设和应用提供重要参考。     

高频地波雷达海杂波背景下目标检测研究综述

高频地波雷达探测距离远、全天候、实时准确探测等优点在目标检测领域广泛应用。针对海杂波会干扰目标检测的问题，分别从非线性预测类、分形类、子空间分解类、对消类等方面对海杂波背景下目标检测方法进行了综合评估。归纳总结国内外相关文献，并对目前方法存在的不足进行总结。为以后深入研究海杂波干扰问题提供参考。     

振动系统特征值和特征向量的—阶导数

本文主要解决两个问题:(1)频率集聚时,如何计算特征值(固有频率的平方)和特征向量(振型)的一阶导数,(2)如果仅获得了少数的低阶模态,如何改进已有的模态展开法,使其能用于计算低阶特征向量的一阶导数。     

变速恒频电源控制器的设计与实现

首先对变速恒频电源控制器（ＧＣＣＵ）的控制功能，保护功能，ＢＩＴ功能进行了详细分析，重点讨论了ＢＩＴ功能和ＧＣＣＵ的硬件设计方案。采用８０９７ＢＨ单片微型计算机，使硬件结构大大简化。文中还对电源系统的故障模式进行了较详细的分析，并阐述了ＧＣＣＵ软件设计的主要技术问题，提出了若干软件设计原则，给出了主要软件框图。所设计的ＧＣＣＵ在变速恒频电源系统中获得了满意的应用