流体注入的轴对称矢量喷管三维流场计算

采用Roe通量差分分裂格式对基于流体注入控制的轴对称矢量喷管内流场进行了数值模拟。流体注入的位置分别为前孔和后孔,注气压强比为0.75～2.0,注气流量比为2.5％～10.0％,矢量角变化范围为2.8°～7.8°。计算结果表明:随着注气流量和注气压强增加,流体注入所产生的喷管矢量角相应增加;注气位置对喷管矢量角影响较大,注气位置靠近喷管尾沿(后孔注气)比注气位置靠近喷管喉部(前孔注气)所产生的矢量角明显增大。     

液体非线性晃动试验与等效力学模型仿真

航天器的在轨机动可能导致液体燃料出现包括非线性晃动在内的复杂动力学行为。采用运动脉动球模型（MPBM）对液体非线性旋转晃动问题进行了研究,并通过开展地面试验验证了MPBM仿真结果的准确性。首先,在MPBM的建模过程中以晃动回复力的形式考虑重力的影响,具体是通过虚功原理将重力作用引入到脉动球的能量变化过程。然后,搭建地面晃动试验平台,实现了对球型贮箱晃动现象的准确观测以及对晃动力和晃动力矩的实时测量。最后,以试验实测的加速度激励和晃动力为参照,采用MPBM进行了仿真与对比,仿真结果较好地匹配了试验结果。文中对液体晃动的合理抽象进一步地提升了等效力学模型对复杂晃动行为的仿真能力,为实现航天器更为高效、准确的在轨控制提供基础。     

载人航天器主动热控制系统流体回路的优化设计

载人航天器一般采用主动热控制技术为主的热控制系统,废热的排散主要通过泵驱动单相流体回路。分析了主动热控制系统的主要设计任务,如系统方案、工质的选择、回路部件的选型、系统参数的确定、控制算法等;提出了主动热控制系统方案及参数选择应满足适应性要求、安全性要求、可靠性要求以及经济性要求,指出主动热控制系统的设计是一个以系统总体质量最小为目标的约束优化问题,并讨论了优化设计的思路与实现流程。最后基于一个具体的设计案例对设计方法进行了验证。     

航天器推进剂晃动与控制系统之间耦合效应的混合型估算方法(英文)

基于等效力学模型理论与计算流体力学技术,提出了一种用于估算航天器中推进剂晃动的力学影响的方法.以计算流体力学技术为依托,建立了晃动的等效力学模型并将其整合为晃动模块,以便在航天器导航控制回路的仿真分析中应用.该模块体现了航天器运动特征参数与推进剂晃动动力响应之间的映射关系,使其在用于分析晃动与控制系统之间的耦合效应时,比直接应用计算流体力学分析软件更为方便.该方法的正确性与优势通过检验算例得到了验证.通过在实例中应用,证明了该方法可方便地用于确定晃动的影响和检验数种防晃设计的有效性.     

Impact of the thermal effect on the load-carrying capacity of a slipper pair for an aviation axial-piston pump

A thermal hydraulic model based on the lumped parameter method is presented to analyze the load-carrying capacity of a slipper pair in an aviation axial-piston pump under specified operating conditions. Both theoretical and experimental results are presented to demonstrate the validity of the thermal hydraulic model. The results illustrate that the squeezing force and thermal wedge bearing force are the main factors that affect the film thickness and load-carrying capacity. At high oil temperature and high load pressure, the film thickness decreases with increasing clamping force due to a combined action of the squeezing bearing force and the thermal wedge bearing force, but the load-carrying capacity will increase. An increase of the film thickness is proven to be beneficial under high shaft rotational speed but especially dangerous as it strongly increases the ripple amplitude of the film thickness, which leads to decreasing the load-carrying capacity. The structural parameters of the slipper can be optimized to achieve desired performance, such as the slipper radius ratio and orifice length diameter ratio. To satisfy the requirement of the load-carrying capacity, the slipper radius ratio should be selected from 1.4 to 1.8, and the orifice length diameter ratio should be selected from 4 to 5.     

微重力下球形贮箱内液体晃动有限元模拟

以卫星球形贮箱为研究对象,用任意拉格朗日-欧拉(ALE)法建立了数学模型,给出了计算的基本方程,并基于MSC-Dytran有限元程序,对常重力和微重力环境中贮箱内推进剂的晃动进行了数值模拟。结果表明,微重力环境中液体更易发生大幅晃动,甚至产生飞溅,工程中常用的等效力学模型已不再适用,而有限元数值模拟方法可较好地解决该问题,为卫星及大充液复杂结构航天器控制系统的设计和分析提供理论参考。     

集成火星进入弹道的开伞过程动力学特性研究

针对火星探测任务设计阶段的需求,提出集成再入弹道、开伞过程仿真一体化设计方法。首先,利用质点动力学模型,计算质点弹道,进行探测器进入过程的飞行轨迹仿真,获得开伞初始状态。其次,基于任意拉格朗日-欧拉（ALE）方法,建立开伞过程的流固耦合（FSI）动力学模型,进行典型工况开伞过程数值模拟,分析开伞动压和马赫数对降落伞充气过程的影响。数值模拟开伞过程伞衣几何外形变化和降落伞的流固耦合动力学行为,得到开伞过载变化曲线、伞衣阻力面积变化等典型特征参数。计算结果表明,降落伞开伞动力学的数值仿真方法为火星再入、减速和着陆（EDL）过程的概念设计提供了一定的参考依据。     

横向激励下液体大幅晃动建模分析

研究部分充液球形贮箱内的液体在横向推力作用下发生大幅晃动的等效力学模型,建模过程同时考虑平动和转动激励。建立一种新的等效模型,首次提出液体的静平衡表面垂直于等效重力方向的假设,将液体的大幅运动分解为跟随等效重力的整体运动和在此基础上的小幅晃动,该等效模型能够更好地模拟液体大幅晃动情形。将仿真得到的晃动力和力矩与传统等效模型及Flow-3d的结果进行对比,验证了新模型的有效性和准确性。该模型可应用于探月软着陆悬停避障过程等实际工程问题中。     

A transient bulk flow model with circular whirl motion for rotordynamic coefficients of annular seals

Bulk flow model with perturbation simplification has been used to calculate rotordynamic coefficients in annular seals which have significant influences on the dynamic behavior of rotors in turbomachinery. In this work, a transient bulk flow model with arbitrary rotor motion is developed, and the boundary conditions and friction factor in the model are calibrated with steady Computational Fluid Dynamics (CFD) analysis. The numerical solution scheme is developed based on the finite element method to obtain the transient reaction force in the seal clearance. With a periodic circular rotor orbit, the transient forces at multiple whirling frequencies are used to evaluate the rotordynamic coefficients. The leakage flowrate of CFD analysis has good agreement with experimental results and the calibrated parameters in bulk flow model are dependent on operating conditions. Although CFD calibration improves the accuracy of the perturbed bulk flow model, the direct damping is overestimated and the cross-coupled damping is underestimated. Compared with the perturbed model, the predictions of the transient bulk flow model are more agreeable with the experiment.